Page History

Name

The name of the IP Peer.

IP Address

Specifies the IPv4 or IPv6 address of the peer.

IP Port

The IP port for this peer.

Default for IP

Set to 'true' if this peer should be used for the IP Address and ephemeral port on ingress, or 'false' if this peer will not be used for the IP Address and ephemeral port on ingress.

Specifies whether SIP response code statistics are collected for the IP Peer.The options are:

• Disabled (default)
• Enabled

Specifies the status of the IP peer. The options are:

• Out of Service
• In Service (default)

Specifies the method to use to exit calls if the mode of the IP peer is set to Out of Service. Options are:

• Dry up - allows the amount of time specified by Dry Up Timeout for calls to end before calls are cleared.
• Force - calls are cleared immediately.

Specifies a direction in which calls are blocked for this IP peer. The options are:

• None (default)
• Bothways
• Incoming
• Outgoing

Packet Service
Profile

IP Signaling
Profile

FQDN Port

Specifies if the active pinging is enabled or not. The options are:

• Enabled
• Disabled (default)

Status Update
Support

Specifies if the status update support should be enabled for this peer or not. The options are:

• Enabled
• Disabled (default)

User Part

Retry Timer

Reg Auth Password

Specifies the DES3 (triple Digital Encryption Standard) encrypted string authentication password for surrogate registration. All ASCII characters from 33 to 126 (except 34 - double quotes) are allowed. SBC users "Admin" and "Operator" have full access to surrogate registration passwords.

"1234567890123456789012340\!$$@#$!@#!@#!@#"

Specifies if the Surrogate Registration should be enabled or not. The options are:

• Enabled
• Disabled (default)

Defines how the Credentials are sent. Options are:

• Challenge For Any Message – The SBC sends credentials for REGISTER, INVITE, PRACK, UPDATE, REINVITE and BYE when these messages are challenged.
• Challenge For Any Message And InDialog Requests – The SBC sends credentials for REGISTER, INVITE, PRACK, UPDATE, REINVITE and BYE when these messages are challenged. The SBC also sends credentials by default as per last challenge in the in-dialog requests such as PRACK, UPDATE, REINVITE and BYE when any one of these methods is challenged earlier in the call.
• Challenge For Register (default) – The SBC sends credentials only for REGISTER when challenged. Challenges for any other messages are returned to the IP-PBX.

Use this flag to control sending registration retries when a REGISTER with credentials is challenged (with stale ≠ true and realm is identical to previous realm received).
When stale = true or realm is not identical to previous realm received, the SBC immediately sends REGISTER.

• Disabled (default) – Send REGISTER when a 401 or 407 in response to REGISTER with credentials is received.
• Enabled – Do not attempt to send REGISTER after receiving a 401 or 407 response.

When this option is enabled, it tries to use the next available pilot number to resend the INVITE.

When this option is enabled, the configured User Name in Surrogate Registration should be used as the User Name in the outgoing INVITE.

Enable this flag on the ingress IP Peer to allow the SBC to reply to local authentication challenges autonomously. If this flag is disabled, the SBC will not reply to authentication challenges locally even if credentials are configured on the egress IPTG.

• Disabled (default)
• Enabled

Enable this flag on the ingress IP Peer to allow egress IPTG authentication to be internally created using the authorization information in mid-dialogue without being challenged.

• Disabled (default)
• Enabled