Use this object to define ingress IP prefixes. Up to 128 Ingress IP Prefix entries may be assigned to a SIP trunk group. Ingress peers matching these ingress IP prefixes are assigned to the specified SIP trunk group.
To View Ingress IP
PrefixPrefixes
On the
main screen, go to
Configuration >
System Provisioning >
Category: Trunk Provisioning >
Trunk Group >
SIP Trunk Group >
Ingress IP Prefix. The Ingress IP Prefix window is displayed.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix |
|---|
|
 Image Removed
|
To Edit Ingress IP Prefix
To edit any of the Ingress IP Prefixes in the list, click the radio button next to the specific Ingress IP Prefix name.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Highlighted |
|---|
|
Image Removed |
The Edit Selected Ingress IP Prefix window is displayed belowUse the drop-down lists to select the desired Address Context, Zone, and SIP Trunk Group.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Edit Window |
|---|
|
Image Modified |
You would not be able to edit as the fields are read-only.
To Create an Ingress IP Prefix
To create a new Ingress IP Prefix, click New Ingress IP Prefix tab on the Ingress IP Prefix List panel.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Fields |
|---|
|
Image Removed |
The Create New Ingress IP Prefix window is displayed.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Create Window |
|---|
|
Image Modified |
The following fields are displayed:Use the following table to enter values and click Save.
| Caption |
|---|
| 0 | Table |
|---|
| 1 | System Provision - Ingress IP Prefix Parameters |
|---|
|
Parameter | Description |
|---|
| IP Address | Specifies the IPv4 or IPv6 addresses address of an ingress peerspeer. Enter the address in the following format: - IPv4 – Specifies the V4 IP address in dotted decimal form (for example 10.11.12.0 24).
- IPv6 – The V6 IP address in hexadecimal/colon form (for example, fd00:21:445:128::7880 64).
| | Prefix Length | Specifies the number of bits of in the address which form the network part of the IP address. Rest The rest of the bits (128 – prefix length) specify the host part of the IP address. The value ranges from 0 to 128 and the default value is 032. |
|
To Copy an Ingress IP Prefix
- To copy
any of the created - an Ingress IP Prefix
and to make any minor changes- , click the radio button next to the
specific Ingress | Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Highlighted |
|---|
|
Image Removed |
- Ingress IP Prefix you want to
highlight the row.- copy.
- Click Copy Ingress IP Prefix
tab on the Ingress IP Prefix List panel- .
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Fields |
|---|
|
Image Removed |
- The Copy Selected Ingress IP Prefix window is displayed
along with the field details which can be edited- .
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Copy Window |
|---|
|
Image Removed |
Make the required changes to the required fields - Make any required changes and click Save
to save the changes- .
The copied Ingress IP Prefix is displayed at the bottom of the original Ingress IP Prefix in the Ingress IP Prefix List panel.
To Delete an Ingress IP Prefix
- To delete
any of the created - an Ingress IP Prefix, click the radio button next to the specific Ingress IP Prefix which you want to delete.
| Caption |
|---|
| 0 | Figure |
|---|
1 | System Provisioning - Ingress IP Prefix Highlighted
Image Removed |
- Click
Delete - the X at the end of the
highlighted - row.
A delete confirmation message appears seeking your decision.- Confirm the deletion when prompted
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Delete Confirmation |
|---|
|
Image Removed |
Click Yes to remove the specific Ingress IP Prefix from the list- .