Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH1bgoswami
REV5ksaurabh
REV6mmalaiandi
REV3paramachandra
REV1dajeru

Include Page
Screenshots_with_outdated_sw_fw_versions
Screenshots_with_outdated_sw_fw_versions

 

The following procedure describes how to install the 

Spacevars
0model5
application as an HA pair configuration:

 

 

  1. Launch the EMA. Refer to Logging On to EMA in Platform Mode for guidance.

  2. Navigate to Administration > System Administration > Software Install/Upgrade tab. The Packages screen is displayed.

  3. Select the Package Name to install.

    Caption
    0Figure
    1Selecting the SBC 5400 HA Application Package

  4. Click Install Software.
    The Install Software section expands and displays the Install Software, Management Ports (configured via the BMC) and System Configuration details.

    Caption
    0Figure
    1Verifying the SBC 5400 HA Application

  5. Enter the System Configuration details.
    1. Select HA Pair in the HA Configuration field.
    2. Select System Name field and enter the system name.
    3. Select Local Hostname and enter local hostname.
    4. Select Peer Hostname and enter peer hostname.

      Caption
      0Figure
      1SBC 5400 HA Configuration Screen

    5. Choose the Active option for Server Role to designate the Active server.
    6. Select the required SBC Type. The options are I-SBC, S-SBC, and M-SBC.
    7. Select NTP Server IP field and enter the NTP server IP address. To identify your NTP Server IP, refer to Configuring SBC 5400 NTP Server Settings.
    8. Select NTP Server Time Zone field and enter the time zone.
  6. Click Start Installation.
    The installation process begins and displays the installation status on the Installation Log section.
    The following actions are performed during the installation process:

    1. Pre-Installation Checks

      Caption
      0Figure
      1Performing Pre-Install Checks for HA

    2. Package content extraction:

      Caption
      0Figure
      1Extracting the Package Contents for HA

    3. Install

      Spacevars
      0model5
       service.

      Caption
      0Figure
      1Installing SBC Services for HA

    4. Initialize

      Spacevars
      0model5
       service and update the
      Spacevars
      0model5
      host name.

      Caption
      0Figure
      1Initializing SBC Service for HA

       

       

       

    5. Reboot 

      Spacevars
      0model5
       system.

      Caption
      0Figure
      1Rebooting the SBC HA Application

  7. Log on to EMA. The new SBC application version is displayed on the Monitoring > Dashboard > System and Software Info window.

    Caption
    0Figure
    1SBC 5400 HA System and Software Info

  8. Verify the system status using Administration > System Administration > Platform Management menu.

    Caption
    0Figure
    1Verify the System Status

  9. From the EMA, install the SBC licenses required in order to use SBC application and its features. See SBC Node-Locked Licenses for HW and SWe SBCs for guidance.
  10. Repeat steps 2 through 9 to install the SBC application on the Standby peer, but with the following changes to steps 5c, 5d, and 5e:

    • Step 5c. Enter Standby server name in Local Hostname field, which is typically the System Name with a letter “b” appended at the end.

    • Step 5d. Enter Active server name for Peer Hostname field, which is typically the System Name with a letter “a” appended at the end.

    • Step 5e. Choose Standby option for Server Role to designate the Standby server as the one you are configuring.

      Caption
      0Figure
      1Standby Server Name in Local Hostname Field

  11. Click Start Installation.

  12. Once the installation is completed, verify the system status for both "Active" and "Standby" servers using Monitoring > Dashboard > System and Software Info menu.

    Caption
    0Figure
    1Verifying System Status for Active Server

    Caption
    0Figure
    1Verifying the System Status for Standby Server

    Info
    iconfalse
    titleNote

    Once the installation is complete on both the servers, verify the sync status using the show table system syncStatus CLI command. 

Pagebreak