Page History

...

1. Click your VM name. Click Resource Allocation tab. Click Edit in the CPU box.

   Caption
   0 Figure 1 Selecting Resource Allocations
   Image Modified

2. Click Hardware tab. Click CD/DVD drive 1. Click the radio button for Datastore ISO File.

   Caption
   0 Figure 1 Datastore ISO File
   Image Modified

3. Click Browse... Select the ISO image software file. For example, the ISO file name is sbc-V05.00.00R000-connexip-os_03.00.00-R000_amd64.iso. Click OK.

   Caption
   0 Figure 1 Browse Datastore

4. Check the box to Connect at power on. Verify the ISO file is listed in the Datastore ISO File.

   Caption
   0 Figure 1 Verifying the ISO File
   Image Modified

Install SBC SWe OS

...

1. Select VM Name. Click Power>Power On. This is required to power on the virtual machine with the ISO image.

   Caption
   0 Figure 1 Connecting at Power On

2. The Connex IP OS Window Appears. Select Install option and click Enter.

   Caption
   0 Figure 1 Installing OS
   Image Modified

   
   
   

3. Select the required keyboard language and click Enter. By default, American English is selected.

   Caption
   0 Figure 1 Selecting Language
   Image Modified

   The Partition Disk windows appear. Select Yes both times to write changes to disk and configure LVM.

   Caption
   0 Figure 1 Partitioning Disk
   Image Removed Image Removed

   Partitioning of disk may take 2-3 minutes. Wait until the partition formatting completes.

   Caption
   0 Figure 1 Partioning Status
   Image Removed

   After partition completes, the OS base installation starts. This may take 5-10 minutes.

   Caption
   0 Figure 1 Installing Base System
   Image Removed

   After OS installation completes, Finishing the Installation window appears. This may take 5-10 minutesinstallation takes 10-15 minutes to complete and on completion the VM instance will reboot.

   Caption
   0 Figure 1 Installing Base System Intance Reboot
   Image AddedImage Removed

4. Uncheck the Connect at power on option in CD/DVD Drive device status.

   1. Select Resource Allocation tab and click Edit.

   2. Select CD/DVD drive 1 option.

   3. Uncheck the Connect at power on option in Device status frame and click OK.

      Caption
      0 Figure 1 Unchecking Connect at Power On Status

      
      
      

5. On instance restart you are prompted to login to ConnexIP. You must first login as linuxadmin with sonus as the password.

   Caption
   0 Figure 1 ConnexIP Login Screen
   Image Added

   
   
   

6. Enter the following command to login as root user with password as sonus!@#.

   Code Block
   language none
   su - root

   Install script renames all the network interfaces and prompts for ConnexIP login. Default login id is root and password is sonus1.

   Caption
   0 Figure 1 ConnexIP Root Login Screen
   Image Modified

7. System prompts for Primary Management IP address, network mask and gateway IP address. If you want to set IPv6 address, click y and provide IPv6 address otherwise click n to continue.

   Note
   The IPv6 address for management can be configured only in this step.

   Warning
   title Caution
   Make sure you enter exact primary management IP, network mask and gateway details. If it is entered wrongly, you have to re-install the OS again.

   
   Following is the example screen:

   Caption
   0 Figure 1 Configuring Primary Management, Netmask and Gateway

...