Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 2

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Added "show" command, reformatted Command Parameters section.

 

Add_workflow_for_techpubs
AUTH1
JIRAIDAUTHSBX-52183
REV5
REV6
REV3
REV1

Panel

In this section:

Table of Contents
maxLevel3
minLevel2

 

 

The S8 Home Routing (S8HR) uses the LTE S8 interface for transporting VoLTE traffic between the visited and home network as data traffic. The S8HR does not require IMS in the visited LTE network. In S8HR roaming architecture model of VoLTE, the Packet Data Network Gateway (PGW), Policy Charging and Rules Function (PCRF), and Proxy Call Session Control Function (P-CSCF) are in the Home Public Land Mobile Network (HPLMN) when the UE is roaming in a Visited Public Land Mobile Network (VPLMN).

Command Syntax

To configure the VPLMN  and HPLMN profiles, execute the following command:

Code Block
languagenone
% set profiles services vplmnProfile <profileName> vplmnId <plmn id> emergencyPrefix <prefix id>
 
% show profiles services vplmnProfile <profileName>

 

Command Parameters

Caption
0Table
1Command Parameters for monitoringProfile
ParameterLength/RangeDescriptionM/O

profileNamevplmnProfile

1-23

<profileName> – Indicates the name of the VPLMN profile.

  • vplmnId – An MCC or combination of MCC and MNC. It is a three or five or six digit number. Maximum 512 vplmn Ids can be created under one VPLMN profile.
  • emergencyPrefix – Provides the list of alphanumeric emergency prefixes. The maximum length is 15 characters.
O
 

Configuration Example

To configure the VPLMN profile, execute the following command:

 

% set profiles services vplmnProfile US_PLMN_PROF vplmnId 310010 emergencyPrefix 911

 


Pagebreak