...
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Sip Trunk Group - Media - Pcrf |
|---|
|
Parameter | Description |
|---|
Pcrf Realm
| Specifies The DIAMETER domain of a Policy and Charging Rule Function. The value ranges up to 128 characters. | Pcrf Commitment
| The degree of commitment expected from the PCRF during call setup or call update.
None (default) – Do not send AAR. Required – Send AAR; proceed only if it succeeds. Supported – Send AAR; proceed even if it fails.
| Cushion Packet Size
| Enable flag to use the smallest packet size in an answer from the range supported for each codec for bandwidth estimate.Disable flag to use packet size in offer. Disabled (default) Enabled
| Cushion Null Sdp
| Enable flag to allow AAR when initial call setup is an INVITE which lacks SDP (estimate G.711 10 msec as a worst case). Disable flag to wait for reverse offer. Disabled (default)Enabled
| Pcrf Interaction Mode | | Available_since |
|---|
| Type | Available Since |
|---|
| Release | 5.0.1 |
|---|
|
Controls whether interaction with PCRF is synchronous or asynchronous. Synchronous - SBC sends INVITE message to egress once it receives the response for the AAR, which is sent towards PCRF.
ASynchronous-- SBC sends INVITE message to egress after sending an AAR request. SBC continues with call processing without waiting for any response from the PCRF or time-out of the transaction.
- The final AAR is sent after receiving the session answer even though the answer or time-out for the preliminary AAR is not received.
| Pcrf Send Aar Only For Session Answer| Available_since |
|---|
| | Type | Available Since |
|---|
Release | 5.0.1 | This parameter specifies how AAR messages are sent after receiving the session answer.
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.