Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Caption
0Figure
1Relay Port Main Field
 

 Image Modified

The Relay Port window is displayed

Caption
0Figure
1Relay Port
 

Image Modified

To Edit Relay Port

To edit any of the Relay Port in the list, click the radio button next to the specific Relay Port name.

Caption
0Figure
1Relay Port Highlighted
 

 Image Modified

The Edit Selected Relay Port window is displayed below.

Caption
0Figure
1Relay Port Edit Window
 

Image Modified

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

...

Caption
0Figure
1Relay Port Fields
 

 Image Modified

The Create New Relay Port window is displayed.

Caption
0Figure
1Relay Port Create Window
 

 Image Modified

The following fields are displayed:

Caption
0Table
1Relay Port Parameters
 

Parameter

Description

Index

The index of this Relay Port. Range 1-4000.

Note

Each Relay Port index must be unique across all zones.

Up to 512 relay ports are configurable per zone, and up to 1,000 system-wide.

Mode

The operational mode for this Relay Port. Options are:

  • Out Of Service (Default)
  • In Service

State

The administrative state of the Relay Port.

  • Disabled (Default)
  • Enabled

IP Interface Group Name

IP interface group used by this Relay Port.

Relay Profile

Enter the Relay Profile used by this Relay Port.

IP Address V4 or V6 

The IPv4 or IPv6 address of the interface for this Relay Port.

Port Number

TCP listener port number to use for this relay. Range is 1 to 65535.

Transport Protocols Allowed

The transport protocol allowed on relay port.

Note

tcp is the only option in this release

To Copy Relay Port

To copy any of the created Relay Port and to make any minor changes, click the radio button next to the specific Relay Port to highlight the row.

Caption
0Figure
1Relay Port Highlighted
 

 Image Modified

Click Copy Relay Port tab on the Relay Port List panel.

Caption
0Figure
1Relay Port Fields
 

 Image Modified

The Copy Selected Relay Port window is displayed along with the field details which can be edited.

Caption
0Figure
1Relay Port Copy Window
 

 Image Modified

Make the required changes to the required fields and click Save to save the changes. The copied Relay Port is displayed at the bottom of the original Relay Port in the Relay Port List panel.

...

Caption
0Figure
1Relay Port Highlighted
 

 Image Modified

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Caption
0Table
1Relay Port Delete Confirmation
 

 Image Modified

Click OK to remove the specific Relay Port from the list.