Page History

This section provides information on logging into and exiting the 

Logging In

Perform the following steps to login to 

1. Use PuTTY or other terminal emulator to connect to the

   Spacevars
   0 product

   server on port 22.
   
   

    

2. At the login prompt, enter login ID and password. The default login and password name is “admin”.

   Code Block
   language none
   login as: admin admin@10.11.12.111's password: *****

   
   A message similar to the following appears:

   Code Block
   language none
   admin connected from 10.11.12.13 using ssh on sbx1.eng.sonusnetexample.com Your last successful login was at 2013-8-22 11:45:1 Your last successful login was from 127.0.0.1 admin@server1>

As a security measure, the following information may display upon login depending upon user access activity against your system. In the example above, items 1 and 2 display after a successful login.

admin connected from 10.11.12.111 using ssh on MYSBC
Your last successful login was at 2014-5-15 18:32:21
Your last successful login was from 10.11.12.111
Your last unsuccessful login was at 2014-5-15 18:33:7
Your last unsuccessful login was from 20.30.40.50
There was 1 unsuccessful login attempt after your last login 

Exiting the CLI

To exit the System-level CLI, type exit at the prompt. For example, 

admin@MYSBC> exit

Depending upon your method to access CLI, either a message similar to the following appears or your terminal session closes.

Connection to MYSBC closed