This parameter controls the routeset usage when routing a call.
Disabled – (default) Request is routed using routing database.
Rcb Next Hop And Stored – Request is routed to the nextHop (Registrar IP in RCB) stored in RCB and copy stored Service Route to egress.
Received – Request is routed using the received routeset in the request.
Roaming Or Stored – If the UE is in roaming mode, request is routed based on the DTG loopback, where DTG is the route obtained during REGISTRATION. If UE is not in roaming, the request is routed same as Stored.
Stored – Request is routed using Path or Service-Route stored during registration.
StoredAll – All requests (including refresh registers) are routed using Path or Service-Route stored during registration.
Note
Attributes Rcb Next Hop And Stored and Roaming Or Stored are not supported on ERE and are intended for use with an external PSX and/or ePSX only.
Ans Supervision Timeout
Configure this parameter on the ingress trunk group specifying the timeout period (in seconds) for the egress trunk group to receive the first backwards message from the called party exchange (SIP 180 - “Ringing" and SIP 183 - “Progress") until the call is answered. If the timeout period expires, the answer supervision action specified is triggered. A value of "0" disables this timer (default = 300).
Ans Supervision Timeout Action
Specifies the action to take if the answer supervision timer expires.
Release (default)
Trap And Restart
Crank Back Profile
Specifies the name of the Crank Back profile.
International Noa Plus
Enable this flag to set CPN and CIN NOA to “International” when number begins with '+'.
Disabled (default)
Enabled
Add Stored Path As Top Route
When enabled, this flag adds the stored Path header as the topmost Route header (on top of stored Service-Route headers) in the outgoing out-of-dialog requests when Use Route Set is set to stored.
Disabled (default)
Enabled
DNS Crankback
This parameter defines whether to apply DNS crankback profile or not for received SIP error response. If it is enabled, DNS crankback feature is applied.
Disabled (default)
Enabled
Send Route URI To PSX
When enabled, the Route-URI is sent to PSX, works in conjunction with Perform Route Header Based Routing enabled in PSX.
When disabled (default), the Route-URI is not sent to PSX.