Page History

...

1. Attach an ESD wrist strap using the ESD grounding point on the rear panel of the chassis (see Connecting Electrostatic Discharge Wrist Strap for details).

2. Disconnect the fiber optic and/or Cat 5 cables, as appropriate, from media ports (Media 0-4) and HA ports (HA 0-1).

3. Disengage the SFP transceiver from

   Spacevars
   0 series

   . The method used to disengage the SFP transceiver will vary according to the manufacturer. For example, hold the wire latch and move it downwards to the horizontal position and pull it outwards, as shown below.

   Note
   The  Spacevars 0 product   Spacevars 0 5200  5200 chassis contains four media ports and the Spacevars 0 product   Spacevars 0 5100  5100 chassis two media ports.

   Caption
   0 Figure 1 Removing SFP

   Caption
   0 Figure 1 Inserting SFP

4. Insert the Sonus

   Spacevars
   0 company

   -approved SFP transceiver into the desired socket and ensure that the latch mechanism engages.

5. Reconnect the fiber optic and/or Cat 5 cables, as appropriate, to media and HA ports.
6. Verify LEDs above the part are flashing indicating link status and data activity.
7. Verify port functionality using the application.

...