Use the QOS Values window to define Differentiated Services Code Point (DSCP) values for a selected Packet Service Profile. The SBC applies these values to different packet types on egress. This configuration applies when a call is not identified as an HPC (High Priority Call) and therefore not subject to an HPC profile.
On the SBC main screen, go to Configuration > Profile Management > Category: Media Profiles > Packet Service Profile > QOS Values or
All > Profiles > Media > Packet Service Profile > QOS Values.
The QOS Values window opens. Select a Packet Service Profile from the drop-down list to view and edit its QOS Values parameters.
Caption |
---|
0 | Figure |
---|
1 | Packet Service Profile - QOS Values |
---|
|
Image Modified |
Use the following table to edit the options and then click Save.
Caption |
---|
0 | Table |
---|
1 | Packet Service Profile - QOS Values |
---|
|
Parameter | Description |
---|
Msrp Dscp | Specifies the DSCP value to use for MSRP packets that egress the SBC. The value ranges from 0 to 63 and the default value is 0. | DTLS SCTP Dscp | Specifies the DSCP value to use for DTLS/SCTP packets that egress the SBC. The value ranges from 0 to 63 and the default value is 0.
| T140Dscp | Specifies the DSCP value to use for T.140 text packets that egress the SBC. The value ranges from 0 to 63 and the default value is 0. | application Dscp | Specifies the DSCP value to use for Application media type. The value ranges from 0 to 63 and the default value is 0. |
|