...
| Div |
|---|
|
| Caption |
|---|
| 0 | Table |
|---|
| 1 | DM/PM criteria parameters |
|---|
| | |
Parameter | Length/Range | Description |
|---|
dmPmCriteria
| N/A | Specifies the name of a DM/PM criteria, which can be assigned to one or more DM/PM rules. - <
unique DM/PM Criteria name> – Select an existing rule or enter a new name. criteriaType – Select the type of manipulation to occur:digit – (default)parameter uri
digitCriteria – The criteria for applying DM/PM rules.digitMatch operation equals – Criterion applies if the designated value matches the actual value exactly (see value parameter below for additional options to choose).ignore – (default) Do not apply criterion (see value parameter below for additional options to choose).notEquals – Criterion applies if the designated value does not match the actual value (see value parameter below for additional options to choose).value – The value to use for matching. Options are: matchValue – Specifies the value to use for matching. The number of digits in the match value must be the same as the number specified in the Number of Digits field (default = "").numberOfDigits – Total number of digits to use for comparison. For example, if the start digit position is 0 and the number of digits specified is 3, reading from left to right, the ERE would use the first, second, and third digits of the complete number for the comparison. (range: 0-2147483647 / default = 0).startDigitPosition – The first position within the complete number specified in Digit Type field to start the comparison with value specified in the Match Value field. The start digit position 0 is the left-most digit of the complete number. (range: 0-2147483647 / default = 0).
egressFlag – Egress flag criteria:operation equals – Set the egress flag to a particular value.ignore – (default) Do not apply the criterion in this section.notEquals – The criterion applies if the designated value does not match the actual value.value – Choose whether to apply DM rule for egress flag:dontSend send natureOfAddress – NOA criteria
operation (same as for egressFlag above)value:
| 950 (default) | aniNotAvailableOrNotProvided | | aniOfCalledPartyNationalNumber | aniOfCalledPartyNoNumberPresent | | aniOfCalledPartySubscriberNumber | aniOfCallingPartyNationalNumber | | aniOfCallingPartySubscriberNumber | any | | apnNumberingPlan | ignore | | international | internationalNotRestricted | | internationalOperator | internationalRestricted | | national | nationalNotRestricted | | nationalOperator | nationalRestricted | | networkSpecific | noNumberCutThroughnoNumberOperatorRequested | | none | partialCallingLineId | | passThrough | spare00...spare26 |
numberLengthoperation: Specify how to match the Number Length criteria with the specified value (in value field):
equalsgreaterThanOrEqualsignore (default)lessThanOrEqualsnotEqualsvalue <unsignedInt> (range: 0-32 / default = 0)numberingPlanIndicatoroperation: Specify how to match the Numbering Plan Indicator with the specified value (in valuefield):equalsignore (default)notEquals
valuedata (default)isdnprivatespare0Unknownspare1spare2spare3 - spare7telex
presentationMatchoperation: Specify how to match the Presentation Match criteria with the specified value (in valuefield):equalsignore (default)notEquals
value allowednone (default)number Unavailable restricted spare
screeningMatchoperation: Specify how to match the Screening Match criteria with the specified value (in value field):equalsignore (default)notEquals
valuenetworkProvidedNotScreenednone (default) userProvidedFailedNetworkScreeninguserProvidedNotScreeneduserProvidedPassedNetworkScreening
digitType – Digit/parameter type to apply this DM/PM Criteria.
<252 | 253 | 254 | billingNumber (default)
calledDirectoryNumber | calledInNumber
calledNumber | callingNumber
contractorNumber | dialedNumber | fromUri
gnAdditionalCalled | gnAdditionalCalling |
gnAdditionalConnected |
gnAdditionalOriginalCalled |
gnAdditionalRedirecting |
gnAdditionalRedirection | gnCalledCesId |
gnCollectCallNumber | gnDestination
gnDialedDigits | gnLocalAni
gnNetworkProvidedNumber | gnPortedDialed |
gnRedirectingTerminating |
gnThirdPartyNumber |
gnUserCallingNotScreened
gnUserCallingScreened | location |
originalCalledNumber | outpulseNumber |
presentationNumber | pretranslated |
redirecting | redirection |
twoStageCollected>
parameterPresenceCheck – Check for presence of this call parameter when applying DM/PM rule.doesntExist – The ERE applies the associated PM rule if the parameter is not present in call parameters.exists – (default) The ERE applies the associated PM rule if the parameter is present in call parameters.
|
|
DM/PM Rule Parameters
The DM/PM Rule parameters are listed in the table below:
| Caption |
|---|
| 0 | Table |
|---|
| 1 | DM/PM Rule Parameters |
|---|
|
| |
Parameter | Length/Range | Description |
|---|
dmPmRule
| 1-23 | The name of this DM/PM (digit manipulation/parameter manipulation) rule. The default DM/PM rules are listed below. You can also create your own DM/PM rules. PAI_AND_FROM_HEADER*
PAI_DISPLAY_NAMES_1_NTL*PAI_SIP_DSPNAME_CLG_NAMPAI_TEL_DSPNAME_GN_CPNPRFX_TO_HEADER_CDPN_NTL* PRFX_TO_HEADER_GDPN_NTL*PRFX_TO_HEADER_OCN_NTL*SIP_ADD_PLUS SIP_REMOVE_CLG81 SIP_REMOVE_PLUS1SIP_REMOVE_PLUS39SIP_REMOVE_PLUS44 SIP_REMOVE_PLUS49SIP_REMOVE_PLUS52SIP_REMOVE_PLUS81SIP_REMOVE_PLUS86SIP_REMOVE_PLUS9
* Uses seeded DM/PM criteria groups (see Tables 2 and 3 below for details). |
subRule
| | Sub-rule priority (0-9) criteria – DM/PM Criteria:
CALLED_NOA_NATIONAL | CALLING_!SEND |
CALLING_ALLOWED | CALLING_EXISTS |
CALLING_NOA_NATIONAL | CALLING_NOT_EXISTS |
CALLING_RESTRICTED | CLG_NAME_EXISTS |
GN_CALLING_ALLOWED | GN_CALLING_EXISTS | GN_CALLING_NOA_NATIONAL |
GN_CALLING_NOT_EXISTS | GN_CALLING_RESTRICTED |
GN_DIALED_NOA_NATIONAL | OCN_NOA_NATIONAL |
PAI_TEL_DISPLAY_NAME | SIP_MATCH_INTL_CD |
SIP_MATCH_INTL_CG | SIP_MATCH_INTL_GNACG |
SIP_MATCH_INTL_GNOCLD | SIP_MATCH_INTL_ORIGIN |
SIP_MATCH_INTL_PORTED | SIP_MATCH_INTL_RDRCTG |
SIP_MATCH_INTL_RDRCTN | SIP_MATCH_NOINTL_CD |
SIP_MATCH_NOINTL_CG | SIP_MATCH_NOINTL_GNACG |
SIP_MATCH_NOINTL_GNOCLD | SIP_MATCH_NOINTL_ORIGIN |
SIP_MATCH_NOINTL_PORTED | SIP_MATCH_NOINTL_RDRCTG |
SIP_MATCH_NOINTL_RDRCTN | SIP_MATCH_PLUS1_GNACG |
SIP_MATCH_PLUS1_GNOCLD | SIP_MATCH_PLUS1_ORIGIN |
SIP_MATCH_PLUS1_PORTED | SIP_MATCH_PLUS1_RDRCTG |
SIP_MATCH_PLUS1_RDRCTN | SIP_MATCH_PLUS39_GNACG |
SIP_MATCH_PLUS39_GNOCLD | SIP_MATCH_PLUS39_ORIGIN |
SIP_MATCH_PLUS39_PORTED | SIP_MATCH_PLUS39_RDRCTG |
SIP_MATCH_PLUS39_RDRCTN | SIP_MATCH_PLUS44_GNACG |
SIP_MATCH_PLUS44_GNOCLD | SIP_MATCH_PLUS44_ORIGIN |
SIP_MATCH_PLUS44_PORTED | SIP_MATCH_PLUS44_RDRCTG |
SIP_MATCH_PLUS44_RDRCTN | SIP_MATCH_PLUS49_GNACG |
SIP_MATCH_PLUS49_GNOCLD | SIP_MATCH_PLUS49_ORIGIN |
SIP_MATCH_PLUS49_PORTED | SIP_MATCH_PLUS49_RDRCTG |
SIP_MATCH_PLUS49_RDRCTN | SIP_MATCH_PLUS52_GNACG |
SIP_MATCH_PLUS52_GNOCLD | SIP_MATCH_PLUS52_ORIGIN |
SIP_MATCH_PLUS52_PORTED | SIP_MATCH_PLUS52_RDRCTG |
SIP_MATCH_PLUS52_RDRCTN | SIP_MATCH_PLUS81_CLG |
SIP_MATCH_PLUS81_GNACG | SIP_MATCH_PLUS81_GNOCLD |
SIP_MATCH_PLUS81_ORIGIN | SIP_MATCH_PLUS81_PORTED |
SIP_MATCH_PLUS81_RDRCTG | SIP_MATCH_PLUS81_RDRCTN |
SIP_MATCH_PLUS86_GNACG | SIP_MATCH_PLUS86_GNOCLD |
SIP_MATCH_PLUS86_ORIGIN | SIP_MATCH_PLUS86_PORTED |
SIP_MATCH_PLUS86_RDRCTG | SIP_MATCH_PLUS86_RDRCTN |
SIP_MATCH_PLUS91_GNACG | SIP_MATCH_PLUS91_GNOCLD |
SIP_MATCH_PLUS91_ORIGIN | SIP_MATCH_PLUS91_PORTED |
SIP_MATCH_PLUS91_RDRCTG | SIP_MATCH_PLUS91_RDRCTN |
SIP_MATCH_PLUS_CLG | SIP_MATCH_PLUS_GNACG |
SIP_MATCH_PLUS_GNOCLD | SIP_MATCH_PLUS_ORIGIN |
SIP_MATCH_PLUS_PORTED | SIP_MATCH_PLUS_RDRCTG |
SIP_MATCH_PLUS_RDRCTN | TO_HEADER_EXISTS
priority (0-999)digitManipulationparameterManipulation – Use parameter to specify parameter manipulation rules.availabilitycharacterManipulationnumberOfCharacters – Number Of characters. (range: 0-64 / default = 24)replacement– Use this parameter to specify replacement type and value.replacementTypeconstant (default)variable
value (range: 1-23 characters)
startCharacterPosition – The character starting point (range: 0-22 / default = 0).
parameterType – Parameter type.
additionalCategory | callingName |
carrierCode | carrierSelectionParameter |
causeOfNoId | chargeRateInfoIndicator |
cliBlockingIndicator | cpc | dpcIndicator
forwardCallIndicator | jurisdiction | olip |
originatingCarrier | originatingChargeArea
paiSipDisplayName | paiTelDisplayName |
sipFromDisplayName | transitNetworkSelection | zzCode
presentation <allowed | none | numberUnavailable | restricted | spare>
ruleType – Rule type. (see table for listing of sub-parameters)digitparameter (default) uri
|
digitManipulation
| | The type of digit manipulation to perform. digitStringManipulation – Options include:action – The action to take when the matching criteria is met (used for international gateway support involving setting NOA to ‘International’ and adding country code):addDestinationCountry addIngressTrunkGroupCountryaddOriginatingCountrynone (default)
numberOfDigits – Number of digits (range: 0-30 / default = 0)replacement – Use when this is a replacement DM rule.startDigitPosition – The start digit position (range: 0-29 / default = 0).
numberParameterManipulation – Options for manipulating number parameter:includeInEgress – Specify whether to include in egress, discard in egress or take no action:discardInEgress includeInEgressnone (default)
natureOfAddress – Nature Of Address options.
950 (default)
aniNotAvailableOrNotProvided
aniOfCalledPartyNationalNumber
aniOfCalledPartyNoNumberPresent
aniOfCalledPartySubscriberNumber
aniOfCallingPartyNationalNumber
aniOfCallingPartySubscriberNumber
any
apnNumberingPlan
ignore
international
internationalNotRestricted
internationalOperator
internationalRestricted
national
nationalNotRestricted
nationalOperator
nationalRestricted
networkSpecific
noNumberCutThrough
noNumberOperatorRequested
none
partialCallingLineId
passThrough
spare00...spare26
numberLength – Enter either "noInput" or a number.noInput (default)<number> (range: 0-31)
numberingPlanIndicator – Numbering Plan Indicator types:
data | ignore | isdn | none |
offsetUnused | private | spare0Unknown |
spare1 | spare2 | spare3 | spare4 |
spare5 | spare6 | spare7 | telephony |
telex
presentation – Presentation options include:allowednone (default)numberUnavailabl restricted spare
screening – Network screening indicator of calling party number. Options include:networkProvidedNotScreened – Network-provided screening, not screened.none (default) •userProvidedFailedNetworkScreening – User-provided screening, failed network screening.userProvidedNotScreened – User-provided screening, not screened.userProvidedPassedNetworkScreening – User-provided screening, passed network screening.
numberType – Specify the number type:
billingNumber (default)calledDirectoryNumbercalledNumber callingNumber contractorNumber gnAdditionalCalled gnAdditionalCalling gnAdditionalConnected
gnAdditionalOriginalCalled gnAdditionalRedirecting gnAdditionalRedirection gnCalledCesId gnDestination gnDialedDigits gnNQI-252 gnNQI-253 gnNQI-254 gnNetworkProvidedNumber gnPortedDialed gnRedirectingTerminating gnUserCallingNotScreened gnUserCallingScreenedlocation originalCalledNumber outpulseNumber pretranslated redirecting redirection twoStageCollected
|
The following DM/PM rules include assigned criteria groups.
...
| Caption |
|---|
| 0 | Table |
|---|
| 1 | DM/PM Rules with Assigned Criteria Groups |
|---|
|
| |
| DM/PM Rule ID | DM/PM Criteria Group ID |
|---|
| PAI_AND_FROM_HEADER | - CPN_!SEND_RES_!EXST
- GN_CPN_!EXST_CPN_ALLOW
- GN_CPN_!EXST_CPN_EXST
- GN_CPN_!EXST_CPN_RESTRC
- GN_CPN_ALLOW_CPN_EXST
- GN_CPN_EXSTS_CPN_!EXSTS
- GN_CPN_EXSTS_CPN_EXSTS
- GN_CPN_RES_CPN_EXISTS
|
| PRFX_TO_HEADER_CDPN_NTL | TOHD_EXST_CALLED_NTL |
| PRFX_TO_HEADER_GDPN_NTL | TOHD_EXST_GN_DIALED_NTL |
| PRFX_TO_HEADER_OCN_NTL | TOHD_EXST_OCN_NTL |
| PAI_DISPLAY_NAMES_1_NTL | - GN_CPN!EXST_CPN_NTL_TEL
- GN_CPN_!EXST_CPN_ALLOW
- GN_CPN_!EXST_CPN_EXST
- GN_CPN_!EXST_CPN_RESTRC
- GN_CPN_ALLOW_CPN_!EXST
- GN_CPN_ALLOW_CPN_EXST
- GN_CPN_EXSTS_CPN_EXSTS
- GN_CPN_NTL_TEL
- GN_CPN_RES_CPN_!EXST
- GN_CPN_RES_CPN_EXISTS
|
The following table shows the criteria sub-rule sequence for each Criteria Group executed against the DM/PM rules. The logical operator defines the logic used when processing the criteria.
| Caption |
|---|
| 0 | Table |
|---|
| 1 | How DM/PM Criteria Groups are Processed |
|---|
|
| |
DM/PM Criteria Group ID | Criteria ID Sequence | Logical
Operator |
|---|
CPN_!SEND_RES_!EXST | - CALLING_!SEND
- CALLING_RESTRICTED
- CALLING_NOT_EXISTS
| OR |
GN_CPN!EXST_CPN_NTL_TEL | - GN_CALLING_NOT_EXISTS
- CALLING_NOA_NATIONAL
- PAI_TEL_DISPLAY_NAME
| AND |
GN_CPN_!EXST_CPN_ALLOW | - GN_CALLING_NOT_EXISTS
- CALLING_ALLOWED
| AND |
GN_CPN_!EXST_CPN_EXST | - GN_CALLING_NOT_EXISTS
- CALLING_EXISTS
| AND |
GN_CPN_!EXST_CPN_RESTRC | - GN_CALLING_NOT_EXISTS
- CALLING_RESTRICTED
| AND |
GN_CPN_ALLOW_CPN_!EXST | - GN_CALLING_ALLOWED
- CALLING_NOT_EXISTS
| AND |
GN_CPN_ALLOW_CPN_EXST | - GN_CALLING_ALLOWED
- CALLING_EXISTS
| AND |
GN_CPN_EXSTS_CPN_!EXSTS | - GN_CALLING_EXISTS
- CALLING_NOT_EXISTS
| AND |
GN_CPN_EXSTS_CPN_EXSTS | - GN_CALLING_EXISTS
- CALLING_EXISTS
| AND |
GN_CPN_NTL_TEL | - GN_CALLING_NOA_NATIONAL
- PAI_TEL_DISPLAY_NAME
| AND |
GN_CPN_RES_CPN_!EXST | - GN_CALLING_RESTRICTED
- CALLING_NOT_EXISTS
| AND |
GN_CPN_RES_CPN_EXISTS | - GN_CALLING_RESTRICTED
- CALLING_EXISTS
| AND |
TOHD_EXST_CALLED_NTL | - TO_HEADER_EXISTS
- CALLED_NOA_NATIONAL
| AND |
TOHD_EXST_GN_DIALED_NTL | - TO_HEADER_EXISTS
- GN_DIALED_NOA_NATIONAL
| AND |
TOHD_EXST_OCN_NTL | - TO_HEADER_EXISTS
- OCN_NOA_NATIONAL
| AND |
Sub-rule Rule Type Parameters
...
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Number translation parameters |
|---|
|
| |
Parameter | Description |
|---|
numberTranslationCriteria
| The number translation criteria (route) label. Use this object to configure Number Translation Criteria for one of element types defined below. Each element type includes the following addtional parameters to configure. - <
elementID1> – A textual field (1-23 characters) to specify the domain name to associate with this element type. For example, the name of the trunk group which will apply this DM/PM rule. - <
elementID2> – A textual field (1-23 characters) to specify userinfo to associate with this element type. For example, the IP peer of the trunk group applying this DM/PM rule. - <
national> – A textual field (1-23 characters) to store the calling number, called number or number prefix to associate with this element type. - <
country> – The Country code to associate with this element type. lookupType – Choose an ENUM lookup type:e911 – Emergency number translation services for subscribers with phone numbers not tied to a specific geographic location (NA variant only).enumCnam – Calling name lookup in the IP network.enumLnp – Number portability lookup in the IP network.enumSipAor – SIP address of the record lookup in the IP network.
|
calledUri | This call processing element specifies the destination of the call. And this parameter is with respect to Request-URI in the received INVITE from UE. When configuring number translation for a Carrier, set the following parameters (see above for field descriptions): <elementID1><elementID2><national><country>lookupType
|
callingNumber
| This call processing element specifies the source of the call. When configuring number translation for a Carrier, set the following parameters (see above for field descriptions): <elementID1><elementID2><national><country>lookupType
|
carrier
| When configuring number translation for a Carrier, set the following parameters (see above for field descriptions): <elementID1><elementID2><national><country>lookupType
|
none
| When configuring number translation with no element type, set the following parameters (see above for field descriptions): <elementID1><elementID2><national><country>lookupType
|
toHeader | This call processing element specifies the destination of the call with respect to To Header in the received INVITE from UE. When configuring number translation for a Carrier, set the following parameters (see above for field descriptions):<elementID1><elementID2><national><country>lookupType
|
trunkGroup
| When configuring number translation for a trunk group, set the following parameters (see above for field descriptions): <elementID1><elementID2><national><country>lookupType
|
Numbering Plan Parameters
...
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Numbering Plan Parameters |
|---|
|
| |
Parameter | Description |
|---|
numberingPlan
| Specifies numbering plan. CHINA_NUM_PLANGENERIC_NUM_PLANGERMANY_NUM_PLANINDIA_NUM_PLANITALY_NUM_PLANJAPAN_NUM_PLANMEXICO_NUM_PLANNANP_ACCESSUK_NUM_PLAN
| Note |
|---|
The numbering plans above are default plans, but you can also create your own numbering plans. |
|
lengths
| The minimum and maximum lengths for various number types. areaCodeexchangeCodelinenationalNumber=subscriberNumber
Maximum and minimum values for above parameters:
max <#> – Enter maximum value. (range: 0-999 / default = 4).min <#> – Enter minimum value. (range: 0-999 / default = 4).
|
prefixProfile
| Prefix profile name. |
...
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Prefix Profile Parameters |
|---|
|
| |
Parameter | Description |
|---|
prefixProfile
| Prefix profile name. Enter a profile name or select from list of default profiles. CHINA_DIAL_PLANGENERIC_DIAL_PLANGERMANY_DIAL_PLANITALY_DIAL_PLANINDIA_DIAL_PLANJAPAN_DIAL_PLANMEXICO_DIAL_PLANNA_DIAL_PLANUK_DIAL_PLAN
| Note |
|---|
The prefix profiles above are default profiles. You may also create your own prefix profiles. |
|
entry
| Use this object to configure the Prefix Profile using the parameters below. <matching pattern> – (up to 28 characters)<match start location> – 0<total min digits> – 3<total max digits> – 3applyDmRule – Enable to apply Dm/Pm Rule.callType – Select linear Call Type.- _
private (default) carrierCutThroughinternationalOperatorinternationalTypeipVpnServicelocalOperatorlongDistanceOperatormobilenationalOperatornationalTypeotherCarrierChosentesttransituserName
| Note |
|---|
Do not select _private option when provisioning Prefix Profile on ERE. Private call routing is not fully supported at this time. |
determineArea – When this flag is enabled, the area code is determined from the analyzed digits.digitType – Select digit type (default = unknown)
900PremiumToll | 950CarrierAccess | carrierAccess | directoryAssistance |
easilyIdentifiableNumber | emergency | governmentEmergency | ieps |
international | internationalOperator | internetOffloadAnonymous |
internetOffloadEconomy | internetOffloadPremium | internetOffloadStandard |
internetReception | ipVpn | localOperator | longDistanceOperator | national |
nationalOperator | noDigits | otherCarrierChosen | private | serviceAccessCode |
subscriber | subscriberOperator | test | tollFree |transit | unknown | userName |
verticalServiceCode
dmPmRule – Dm/Pm Rule identifier:PAI_AND_FROM_HEADERPAI_DISPLAY_NAMES_1_NTLPAI_SIP_DSPNAME_CLG_NAMPAI_TEL_DSPNAME_GN_CPNPRFX_TO_HEADER_CDPN_NTLPRFX_TO_HEADER_GDPN_NTLPRFX_TO_HEADER_OCN_NTLSIP_ADD_PLUS SIP_REMOVE_CLG81SIP_REMOVE_PLUS1SIP_REMOVE_PLUS39 SIP_REMOVE_PLUS44SIP_REMOVE_PLUS49 SIP_REMOVE_PLUS52SIP_REMOVE_PLUS81 SIP_REMOVE_PLUS86SIP_REMOVE_PLUS91
natureOfAddress – Nature Of Address. 950 (default) aniNotAvailableOrNotProvidedaniOfCalledPartyNationalNumber aniOfCalledPartyNoNumberPresentaniOfCalledPartySubscriberNumberaniOfCallingPartyNationalNumberaniOfCallingPartySubscriberNumberanyapnNumberingPlanignoreinternationalinternationalNotRestrictedinternationalOperatorinternationalRestrictednationalnationalNotRestrictednationalOperatornationalRestrictednetworkSpecificnoNumberCutThroughnoNumberOperatorRequestednonepartialCallingLineIdpassThroughspare00...spare26numberLeadingPrefixDigits <#> – Enter number of Leading Prefix Digits (range: 0-999 / default = 0).numberLeadingPrefixDigitsToStrip <#> – Enter number of Leading Prefix Digits To Strip (range: 0-999 / default = 0).numberingPlanIndicator – Numbering Plan Indicator.
data | ignore | isdn | none | offsetUnused | private | spare0Unknown | spare1 | spare2 |
spare3 | spare4 | spare5 | spare6 | spare7 | telephony | telex
|
...