Page History
| Panel | ||||
|---|---|---|---|---|
In this section:
|
You can configure up to three RADIUS servers per SBC. When more than one RADIUS server is configured and RADIUS authentication is attempted, the server configured with the
...
lowest numeric priority value is tried first. If fallback is configured, the
...
server with the next lowest numeric priority value is tried next. SBC allows a configurable number of retries and time-outs before retry.
To View
...
the List of Radius Servers
On the SBC main screen, go
...
to Administration
...
> Users and Application Management
...
> Radius Authentication> Radius Server. The Radius Server window is displayed.
| Caption | ||||
|---|---|---|---|---|
| ||||
...
To Create
...
a
...
Radius Server
...
| Info | ||||
|---|---|---|---|---|
| ||||
You can configure up to three RADIUS servers per SBC. The New Radius Server |
...
option is not available once three servers are configured. |
| Caption | ||||
|---|---|---|---|---|
| ||||
To create a new RADIUS server configuration:
Click New Radius Server. The Create New Radius Server window is displayed.
Caption 0 Figure 1 Create New Radius Server
...
Window
...
...
- Use the following table to specify configuration for a RADIUS server, then click Save.
| Caption | |||
|---|---|---|---|
|
...
| |
| Parameter | Description |
|---|---|
| Server Name | The name for the RADIUS server |
...
| (up to 23 characters). |
...
| Priority | When configuring multiple RADIUS servers, use this attribute to specify the order to attempt RADIUS authentication. The RADIUS server with the lowest numeric priority value is contacted first. |
| State | Operational state of the RADIUS server. Options are |
...
|
...
| |
| Radius Server IP | The IPv4 address of the RADIUS server. |
...
The default value |
...
is 0.0.0.0.
|
...
| |
| Radius Server Port | The RADIUS server port to which the SBC sends |
...
| requests. Range: 1-65535. |
...
| The default value is 1812. | |
| Radius Nas IP | The IPv4 address of the SBC to send in |
...
| the ACCESS_REQUEST message. |
...
| The default value |
...
| is 0.0.0.0. | |
| Radius Shared Secret | The shared secret used to encrypt the data exchanged between the SBC and the RADIUS server. Range: 6-128 characters. |
| Mgmt Interface Group | The Management Interface Group |
...
to use to connect to |
...
the RADIUS server.
|
...
|
...
To copy any of the created Radius Servers and to make any minor changes, click the radio button next to the specific Radius Server to highlight the row.
| Caption | ||||
|---|---|---|---|---|
| ||||
Click Copy Radius Server tab on the Radius Servers List panel.
|
To Copy
...
a Radius Server
| Info | ||||
|---|---|---|---|---|
| ||||
You can configure up to three RADIUS servers per SBC. The Copy Radius Server |
...
option is not available once three servers are configured. |
| Caption | ||||
|---|---|---|---|---|
| ||||
The Copy Selected Radius Server window is displayed along with the field details which can be edited.
| Caption | ||||
|---|---|---|---|---|
| ||||
Make the required changes to the required fields and click Save to save the changes. The copied Radius Server is displayed at the bottom of the original Radius Server in the Radius Server List panel.
To Delete Radius Server
To delete any of the created Radius Server, click the radio button next to the specific Radius Server which you want to delete.
| Caption | ||||
|---|---|---|---|---|
| ||||
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
| Caption | ||||
|---|---|---|---|---|
| ||||
...
To copy the configuration of an existing RADIUS server and modify it to create a new configuration:
- Click the radio button adjacent to its name.
- Click Copy Radius Server. The Copy Radius Server window opens showing the values of the configuration you are copying.
- Make changes to the fields as needed and click Save.
To Delete a Radius Server
To delete a RADIUS server configuration:
- Click the radio button adjacent to the name of the RADIUS server configuration you want to delete.
- Click the X at the right end of the row.
- Confirm the deletion when prompted.
Overview
Content Tools