| Add_workflow_for_techpubs |
|---|
| AUTH1 | |
|---|
| REV5 | |
|---|
| REV6 | |
|---|
| REV3 | |
|---|
| REV1 | |
|---|
| REV2 | |
|---|
|
Specifies whether the Flags should be enabled or not.
To View and Edit Flags
On SBC main screen,
...
navigate to All > Profiles > Media > Tone And Announcement Profile > Local Ring Back Tone > Flags.
Select the desired Tone And Announcement Profile from the drop-down list to view its respective Flags parameters.
The Flags window is displayed.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - Media Profiles - Local Ring Back Tone - Flags |
|---|
|
 Image Modified
|
| Info |
|---|
|
To view the flag Annoucement Based Tones, the option Signaling Tone Package State must be enabled in Local Ring Back Tone. |
The following fields are displayed:
| Caption |
|---|
|
| Parameter | Description |
|---|
Use This Lrbt For Egress
| Specifies Lrbt state of the Egress: |
|
...
...
| Use This Lrbt For Ingress | Specifies Lrbt state of the Ingress: |
|
...
...
Specifies Dynamic Lrbt state:
Use this flag to play tone locally on receipt of 180 with SDP, until RTP is received from the remote peer. |
|
...
...
| Force LRBT | Use this flag to play tone locally on receipt of any 18x with or without SDP, until 200 OK (INVITE) or UPDATE is received from the remote peer. | Announcement Based Tones | Use this flag to |
|
...
play tones as announcements by using stored files. This mode does not use DSP resources.
NOTE: If this flag is disabled, the SBC uses DSP (TNAPAD) to generate and play tones. |
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.