Use the the QOS Values window to define Differentiated Services Code Point (DSCP) values for the a selected Packet Service Profile to apply . The SBC applies these values to different packet types on egress. This configuration applies when a call is not identified as an HPC (High Priority Call) and therefore not subject to an HPC profile.
On the SBC main screen, go to Configuration > Profile Management > Category: Media Profiles > Packet Service Profile > QOS Values or
All > Profiles > Media > Packet Service Profile > QOS Values.
Select the desired The QOS Values window opens. Select a Packet Service Profile from the drop-down list to view and edit its respective QOS Values parameters. The QOS Values window opens.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Packet Service Profile - QOS Values |
|---|
|
|
The following fields are displayed:Use the following table to edit the options and then click Save.
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Packet Service Profile - QOS Values |
|---|
|
Parameter | Description |
|---|
| Msrp Dscp | Specifies the DSCP value to use for MSRP packets that egress the SBC. The value ranges from 0 to 63 and the default value is 0. | | DTLS SCTP Dscp | Specifies the DSCP value to use for DTLS/SCTP packets that egress the SBC. The value ranges from 0 to 63 and the default value is 0.
| | T140Dscp | Specifies the DSCP value to use for T.140 text packets that egress the SBC. The value ranges from 0 to 63 and the default value is 0. |
|
Make any required changes and click Save