| Response | Description |
|---|
| Routes | The number of routes returned. |
| AIN Flags | Optional parameters returned in Send-to-Resource message. |
| AmaBafModule | Automatic Message Accounting modules in Telcordia AMA format. |
| AmaSlpId | Identifies a service or a unique subset of service functionality. |
| BillingData | This is the billing information for this call. Includes information such as carrier origin, cluster ID, trunk ID, and so on. |
| BillingIndicators | Billing indicators are used to pass billing information to the SBC client so it can add the information to the accounting record. |
| BusinessGroupBillingInfo | This is the business group billing information for the call. |
| CalledBusinessGroup | Returns information such as business group ID and line privileges for the called business group. |
| CallInfo | Conveys information that the trigger response belongs to the new leg of the call. |
| CallInformationRequest | This is the call information request for the call. |
| CallingBusinessGroup | Returns information such as business group ID and line privileges for the calling business group. |
| CallingNumberChargeArea | Returns the charge area for the calling number. |
| Category | Similar to OLIP (Originating Line Information Parameter). |
| CallType | The type of call, such as National, International, etc. |
| ConvertOlecCarrierCode | Signal to GSX to convert the OLEC carrier code. |
| DPCInfo | Destination Point Code Information parameter, based on called party number and gateway name. |
| JTIParameters | Specifies customer-specific identification parameters. |
| CountryCode | In the CAS (Channel Associated Signaling) protocol, the country code is transmitted as a separate field. When a country code is present and the signaling protocol is CAS, the country code is passed to the SBC in the Country Code field. |
| ForwardCallIndicators | This specifies how the carrier code was specified for the call. The data for this field is derived from the carrier selection parameter in ISUP signaling. |
| GenericName | The SBC client should send the generic name parameter in the signaling. |
| IngressIPParameters | Returns ingress IP signaling parameters and header extensions. |
| IngressMediaProfile | The SBC Tone and Announcement Profile used in the call. |
| IngressParameterFlags | Attributes associated with the ingress trunk group, such as the ATP Supported attribute. |
| IngressSwitch | The switch on which the call came in. |
| IngressTrunkGroup | The trunk group on which the call came in. |
| Lata | This specifies the local access and transport area of the carrier. |
| LICriteriaInfo | Displays the Lawful Intercept criteria sent back by the SBC. |
| MidCallData | Data containing redirection information related to Policy Mid Call Actions. For calls in GSM networks, the SBC may send Policy Mid Call Actions to its clients during late call forwarding scenarios in which call redirections occur. For details, see the section "Policy Mid Call Action Fields" on page 1-20. |
| MoreRoutesInfo | Specifies more routes availability information. |
| NetworkData | On a per-route basis, includes information specifying whether to generate, propagate, or suppress the Partition ID and Network ID in the egress IAM. |
| NFCI | This parameter, National Forward Call Indicator, contains zoning indicator, charge indicator, and IN call indicator fields. |
| OriginalRedirectingNumberCallType | The call type of the original redirecting number. |
| OriginatingGatewayInfo | The SIP server or H.323 gateway from which the call originated. |
| OverlapDialing | Includes values provisioned on the SBC for overlap dialing, such as the minimum digits for routing a call, the minimum digits for a valid phone number, and the maximum digits for a valid phone number. |
| OwnCarrierInfo | This is a specific ISUP parameter. It includes the originating carrier code of the incoming call. |
| PacketProfile | Indicates the settings in the Packet Service Profile used. |
| PartialCli | The partial CLI is passed down to the SBC client whenever the SBC does not receive a calling number in the policy request. |
| PortabilityInfo | Indicates whether or not number portability information is included in the response (NP Status), and whether the Query on Release (QoR) is received in the ingress message or the local exchange must perform the lookup (NPI Flags). This is for INAP use only. |
| Provider | The partition ID of the carrier or service provider. |
| SBCCongestion | The current SBC CPU congestion level, including the allowed calls per total calls for the level. |
| RedirectBackwardInformation | The redirect backward information for the call. |
| RedirectionInfo | Provides the reason for the redirecting the call. |
| RouteTable | The routing label. |
| ScpCarrierCode | The carrier code returned by the SCP, if available. |
| Script | The script returned for execution on the SBC client. |
| SrcCarrierType | Describes how a carrier was chosen for routing the call. |
| SrcTGConfiguration | Information about the source trunk group. |
| TranslationSourceNumber | The translation source number for the call. |
| Variables | In the policy response, the runtime variables will be populated here. |
| XCorrelationID | A customer-specific parameter for a call involving the SBC SPAS service |
| VisitorMA | The Visitor MA (Message Area) parameter, which is a customer- specific Japan ISUP extension parameter for routing calls in a mobile network. |