...
...
...
Back to Table of Contents
...
...
Overview
| Excerpt Include |
|---|
| Zone - Relay Port - CLI |
|---|
| Zone - Relay Port - CLI |
|---|
| nopanel | true |
|---|
|
Procedure
Use the following procedure to accomplish the following:
1. Create a Relay Profile
Create a Relay Profile specifying ingress and egress CAC parameters as well as TCP keep-alive value.
...
set profiles services relayProfile RP1 maxEgressConn 10 maxEgressRate 50 maxIngressConn 100 maxIngressRate 80 tcp keepAlive 100 |
2. Assign the Relay Profile to ingress and egress TCP relay ports
Create an ingress egress TCP relay port and assign the relay profile (Use the IP Address of the SIP Signaling port).
...
set addressContext AC1 zone AC1Z1 id 2 relayPort 3 ipAddress 10.7.14.41 portNumber 2024 ipInterfaceGroupName IG1 transportProtocolsAllowed tcp relayProfile RP1 state enabled mode inService |
3. Create IP Peer routing label
Create Routing Label for IP Peer.
...
set global callRouting routingLabel RL_EGRESS routingLabelRoute 1 routeType ipPeer ipPeer ipPeer1 |
4. Create a Relay Route to specify how to route incoming call
Create a Relay Route to specify how the call coming in on a particular relay port must be routed.
...
set global callRouting route none Sonus_NULL Sonus_NULL relay 3 Sonus_NULL all all ALL none Sonus_NULL routingLabel RL_EGRESS |