Page History

The EMS uses the EMS CALEA user role for all LI configuration operations from and to the SBC Configurator, and the admin user role for communicating over netconf to the SBC. The EMS creates the SBC CALEA user credentials automatically when a SBC (including the SBC Configurator) registers to it. Cloud SBC instances are registered dynamically in the EMS.

Prerequisites

To configure CDC for cloud M-SBC instance:

• Instantiate EMS SWe instance with LI interface support using the EMS_SA_HEAT_TEMPLATE_VERIZON Heat Template. For more information, refer to EMS Standalone Instantiation for Geographical Redundancy (GR) Deployment.
• Create a Configurator cluster. For more information, refer to Creating an SBC SWe Configurator Cluster.
• Create a Configurator instance. For more information, refer to Instantiating SBC Configurator using Heat Template.

M-SBC Basic Configuration

To create basic configuration for M-SBC:

1. Log on to EMS as admin user. 

2. Under Network Mgmnt, click Cluster / VNF Management. The Cluster/VNF Management window is displayed. 

3. Create M-SBC cluster. For more information, refer to Creating an SBC SWe Cluster.

4. Click Configurations tab.

5. Click New Configuration. The New Configuration pane is displayed.

   Caption
   0 Figure 1 New Configuration

6. Click Master Configurator tab.

7. Select the version of the configuration from the Version drop-down.
   

8. Select an SBC Configurator instance from the Master Configurator drop-down.
   This node is used to create the configuration. The SBC Configurator nodes are displayed based on the version selected. Only unlocked SBC Configurator nodes are listed.
   

9. Enter a name for the configuration in the Configuration Name field. The SBC configuration name can contain only letters, numbers, dashes (-), apostrophes ('), underscores (_), colons (:) and spaces.
   

   Note
   The cluster ID is set as the default name for the first configuration. You can modify the name. The name must be unique. The subsequent configurations are named with a combination of cluster name and some unique identifying information. The default name varies based on how the configuration is created.

   
   

10. Click Create. A circular progress bar is displayed against the Master Configurator node. It takes around six minutes to load master configuration.

    Caption
    0 Figure 1 Configurator Loading

    When the Master Configurator node is loaded, the Open Editor button is displayed next to the Master Configurator node.

    Caption
    0 Figure 1 Open Editor

11. Click Open Editor. The SBC Configuration Manager window is displayed. 
    

    Caption
    0 Figure 1 SBC Configuration Manager

12. Create the basic M-SBC configuration on the SBC configurator. For information on M-SBC configuration, refer to Configuring M-SBC.

13. Click Apply Saved Changes and Close. A circular progress bar is displayed.

    Caption
    0 Figure 1 Saving Configuration

     

    The configuration is saved on EMS SWe and the following window is displayed:
    

    Caption
    0 Figure 1 Locked Configurator

14. Create CDC configuration (Proceed to Configuring CDC using EMS CALEA User Account).

Anchor
Configuring CDC using EMS CALEA User Account Configuring CDC using EMS CALEA User Account

Configuring CDC using EMS CALEA User Account

For LI, the CDC configuration is performed using the CDC Configuration Manager through EMS. You can Create CDC information only as EMS calea user from the EMS CDC configuration window.

Prerequisites

Enable calea user. For information, refer to Enabling Lawful Intercept on EMS Standalone.

Procedure

1. Log on to EMS as calea user.
2. Under Network Mgmnt, click Lawful Intercept. The Lawful Intercept CDC Provisioning window is displayed.

3. Click Cluster CDC tab. The Cluster CDC pane is displayed.

   Caption
   0 Figure 1 Cluster CDC Tab

   
   The following parameters are displayed:

   Caption
   0 Table 1 Cluster Configuration Parameters
   Parameter Description Locked Configuration Specifies the configuration name. Configuration Role Specifies the type of the configuration role. The roles are Default and Alternate. Cluster Specifies the name of the cluster. Master Configurator Specifies the name of the locked master configurator instance.

4. Select the M-SBC cluster with locked configurator node.

5. Click Launch CDC Configuration Manager. The SBC Configuration Manager window is displayed.

   Caption
   0 Figure 1 Launch CDC Configuration Manager

6. Create Call Data Channel for M-SBC (Proceed to Creating Call Data Channel for M-SBC).

Anchor
Creating Call Data Channel for M-SBC Creating Call Data Channel for M-SBC

Creating Call Data Channel for M-SBC

The SBC SWe provides the ability to configure the IP address, TCP port, and other parameters used for communication towards the mediation server.

To create a new Call Data Channel:

1. In the SBC Configuration Manager window, navigate to Configuration > Intercept > Call Data Channel. The Call Data Channel window is displayed.

   Caption
   0 Figure 1 Call Data Channel Window

2. Select default from Address Context drop-down menu.

   Caption
   0 Figure 1 Call Data Channel for M-SBC

3. Click New Call Data Channel. The Create New Call Data Channel window is displayed.

   Note
   You can configure the LI using the default Address Context only.

4. Specify the following values:

   1. Name: Type the name of the call data channel.

   2. Intercept Standard: Select packetcable from the drop-down menu.

   3. Vendor ID: Select ss8 from the drop-down menu.

   4. RTCP Interception: Select Enabled.

   5. Media IP Interface Group Name: Select media IP interface group name from the drop-down menu.

      Caption
      0 Figure 1 Creating New Call Data Channel

      Caption
      0 Figure 1 Creating New Call Data Channel Parameters
      Parameter Description Name Specifies the name of the CDC. Intercept Standard Specifies the intercept standard used. Vendor Id Specifies the vendor of the LI server used. RTCP Interception Specifies to intercept RTCP data. The values are Disabled (default)  Enabled Media IP interface Group Name Select Media IP interface Group Name.

5. Click Save. The object is created successfully.

6. Click OK.
   

   Caption
   0 Figure 1 Call Data Channel List

7. Configure mediation server (Proceed to Creating Mediation Server).

Anchor
Creating Mediation Server Creating Mediation Server

Creating Mediation Server

After the Call Data Channel is created, you must create Mediation Server objects associated with the Call Data Channel. The CDC configuration supports configuring up to eight Mediation Servers.

To create mediation server:

1. Navigate to Configuration > Intercept > Call Data Channel > Mediation Server. The Mediation Server window is displayed.

   Caption
   0 Figure 1 Mediation Server

2. Select default from Address Context drop-down menu.

3. Select the Call Data Channel created for M-SBC from the drop-down menu.

   Caption
   0 Figure 1 New Mediation Server

4. Click New Mediation Server. The Create New Mediation Server window is displayed.

5. Type the mediation server name in Msname.

   Caption
   0 Figure 1 Creating New Mediation Server

6. Click Save. The Object is created successfully.

7. Click OK. The Mediation Server List window is displayed. You can create up to eight mediation servers for M-SBC.

   Caption
   0 Figure 1 Mediation Server List

8. Configure TCP (Proceed to Mediation Server - Media - TCP).

Anchor
Mediation Server - Media - TCP Mediation Server - Media - TCP

Mediation Server - Media - TCP

This screen includes the LI Mediation Server TCP Media intercept parameters.

To view TCP parameters:

1. Navigate to Configuration > Intercept > Call Data Channel > Mediation Server > Media > TCP. The TCP window is displayed.

   Caption
   0 Figure 1 TCP

   Caption
   0 Table 1 TCP Parameters
   Parameter  Description IP Address V4 or V6 IPV4/IPV6 address of the mediation server for media interception over TCP. Port Number Specifies the port number of the mediation server for media interception over TCP. Range is 0 - 65535. DSCP Value Specifies the DSCP value for intercepted media packets sent on TCP port. Default value is 16 and range is 0 - 63. Mode Specifies the mode of the TCP connection towards the mediation server for media interception. The Options are: In Service Out of service (default) State Specifies the state of the TCP connection towards the mediation server for media interception. The Options are: Disabled (default)  Enabled KA Time Specifies the duration between two keep alive transmissions in idle condition. The default value is 180. KA Interval Specifies the duration between two successive keep alive re-transmissions, if acknowledgement to the previous keep alive transmission is not received. The default value is 30. KA Probe Specifies the number of re-transmissions to be carried out before declaring that remote end is not available. The default value is 4.

2. Select default from the Address Context drop-down menu.

3. Select the Call Data Channel from the drop down menu.

4. Select the Mediation Server from the drop-down menu.

5. Configure the required details.

   Note
   The configurations can only be updated with State as Disabled and Mode as Out Of Service.

   
   

   Caption
   0 Figure 1 Editing TCP - Out of Service

6. Click Save. The object is Updated Successfully.
7. Click OK.

8. Enable the mediation server by changing the State as Enabled and Mode as In Service.

   Caption
   0 Figure 1 Editing TCP - In Service

9. Click Save to save the configuration.

10. Click Apply Saved Changes and Close.

11. Activate the CDC configuration (Proceed to Activating CDC Configuration for M-SBC).

Anchor
Activating CDC Configuration for M-SBC Activating CDC Configuration for M-SBC

Activating CDC Configuration for M-SBC

To activate a cluster configuration for SBC SWe:

1. Log on to EMS as admin user.
2. Under Network Mgmnt, click Cluster / VNF Management. The Cluster/VNF Management window is displayed.

3. Select the M-SBC cluster for which the CDC configuration is created.
   

4. Click Configuration tab. The Configuration pane is displayed.
   

   Caption
   0 Figure 1 Configuration Pane 3 Configuration Pane

    

5. In Configuration Role column, select the configuration role to activate.

6. Click Activate Configuration. The Activation in progress status is displayed. When the activation is completed, the nodes in the cluster are updated with the active configuration, the Configuration Status is displayed as Last update complete.
   

   Caption
   0 Figure 1 Activation Completed

    

7. Instantiate M-SBC. For more information, refer to Instantiating M-SBC using N:1 Nested Heat Template.
8. After activating the default configuration and an update to the active configuration occurs, you must activate the candidate configuration using the steps on the page Partial Configuration.

Anchor
Viewing Statistics for M-SBC Viewing Statistics for M-SBC

Viewing Statistics for M-SBC 

This object displays the mediation server media statistics.

To view the LI statistics:

1. Logon to EMS as CALEA user.
2. Under Network Mgmnt, click Lawful Intercept. The Lawful Intercept CDC Provisioning window is displayed.

3. Click Cluster CDC tab. The Cluster CDC pane is displayed.

4. Select the M-SBC cluster.

5. Click View Nodes. The nodes list in the cluster is displayed.

   Caption
   0 Figure 1 View Nodes

6. Select the required node to view the mediation server media status.

   Click Launch Node LI Stats. The Mediation Server Media Status window is displayed. 
   

   Caption
   0 Figure 1 Mediation Server Media Status