Page History

Mandatory parameters:

filterAdminN/A

Event Log Class Filter configuration table.

<node name>N/A

SBC node name.

<event type>

N/A

The type of event log to configure:

• audit – System audit data. These files contain a record of all management interactions that modify the state of the system, and includes all the changes made via the CLI and the Netconf interface. These files use .AUD extensions.
• debug – System debugging data. These files have .DBG extensions.
• security – Security level events. These files have .SEC extensions.
• system – System level events. These files have .SYS extensions.
• trace – System trace data. These files have .TRC extensions.

<event class>N/A

For each event type, configure one of the following event:

• audit – Audit subsystem.
• callproc – Call Processing subsystem.
• directory – Directory Services subsystem.
• netmgmt – Network Management subsystem.
• policy – Policy subsystem.
• resmgmt – Resource Management subsystem.
• routing – Network Routing subsystem.
• security – Security subsystem.
• signaling – Signaling subsystem.
• sysmgmt – System Management subsystem.
• trace – Call Trace subsystem.

levelN/A

Minimum severity level threshold for event logging:

• critical – log only critical events.
• info – log all events.
• major – log major and critical events only.
• minor – log all events other than info.
• noevents – do not log any events.

stateN/A

Administrative state of event logging for this event type. Set to “on” if filter entry should take precedence over per-node settings.

• off (default) – Logging is not activated.
• on – Logging is activated.

filterStatus

N/A

Event log class filter status table.

<system name>N/A

SBC system name.

<event type>N/A

The type of event log:

• audit – System audit data. These files contain a record of all management interactions that modify the state of the system, and includes all the changes made via the CLI and the Netconf interface. These files use .AUD extensions.
• debug – System debugging data. These files have .DBG extensions.
• security – Security level events. These files have .SEC extensions.
• system – System level events. These files have .SYS extensions.
• trace – System trace data. These files have .TRC extensions.

<event class>N/A

Event class for each event type:

• audit – Audit subsystem.
• callproc – Call Processing subsystem.
• directory – Directory Services subsystem.
• netmgmt – Network Management subsystem.
• policy – Policy subsystem.
• resmgmt – Resource Management subsystem.
• routing – Network Routing subsystem.
• security – Security subsystem.
• signaling – Signaling subsystem.
• sysmgmt – System Management subsystem.
• trace – Call Trace subsystem.

resetStatsN/A

Use this control to reset the value of Events Filtered column of the filterStatus display.