...
Server Hardware Requirements
Following table lists the server hardware requirements:
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Server Hardware Requirements |
|---|
|
| Configuration | Requirement |
|---|
| Processor | Intel Xeon processors (Nehalem micro-architecture or above) | Note |
|---|
It is recommended to use Westmere (or newer) processors for better SRTP performance. These processors have the AES-NI instruction set for performing cryptographic operations in hardware. |
| | RAM | Minimum 24 GB | | Hard Disk | Minimum 500 GB | | Network Interface Cards (NICs) | Minimum 4 NICs, if physical NIC redundancy is not required. Otherwise, 8 NICs (preferably with SR-IOV capability to support future SWe optimizations). | Note |
|---|
Make sure NIC has multi-queue support which enhances network performance by allowing RX and TX queues to scale with the number of CPUs on multi-processor systems. |
| Note |
|---|
Only Intel I350 Ethernet adapter is supported for configuring as VMDirectPath I/O pass-through device. |
| | Ports | Number of ports allowed: - 1 Management port
- 1 HA port
- 2 Media ports
|
|
...
For more information, see Downloading SBC SWe Software Package From SalesForceInstallation Files from SalesForce Portal.
Sonus Recommendations for Optimum Performance
...