...
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Media RTCP Control |
|---|
|
| Parameter | Description |
|---|
Sender Report Interval | Specifies the RTCP SR (sender report) interval when RTCP is terminated by NP. | Send BYEPacket | Use this flag to choose whether or not to send RTCP BYE packet. disabled – Use this setting to suppress RTCP BYE packet in a pass-through scenario when RTCP terminationForPassthrough option is enabled and the call is not established. This setting is useful to avoid one-way audio when Dynamic LRBT and RTCP are in use at the same time.enabled (default) – When this flag is enabled, the SBC sends the RTCP BYE packet when a call is terminated. This command affects all calls configured with RTCP termination.
|
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.