This will activate two 10 Gbps packet ports. |
SBC-4X1GMP-D | SBC 5400 RTU license to enable all four media ports. each operating at 1 Gbps. Note: If the SBC 5400 is configured for two 1 Gbps media ports (default configuration), no license is required). |
SBC-LI-D | Enables support for Lawful Intercept service using ERE. |
SBC-POL-ENUM-D | SBC ERE support for accessing ENUM databases. |
SBC-POL-E911-D | RTU license for E911 service. |
DSP-G722-D ($0 charge) | RTU media interworking using G.722. Use license to enable G.722 audio transcoding. (DSP modules required) Note: does not charge for the G.722 codec; however, the SBC 5xx0/7000 series code still checks for this license. Because of this, a $0 charge DSP-G722-D license must be generated and installed on SBC 5xx/7000 series in order to use G.722 features. |
SBC-SIPREC-D | SIPREC session recording support. |
SBC-NICEREC-D | Session recording using the NICE proprietary recording system. |
VDSP-RTU-D | Enables transcoding feature in SBC SWe. If value is non-zero, it allows specified number of transcoded calls on the system. If zero, no transcoded calls are allowed. VDSP-RTU-D count should be always less than or equal to SBC-RTU-D count. If not, no transcoded calls are allowed. Note: Any additional emergency oversubscription is not supported for transcoded emergency calls on SBC SWe. |
DSP-AMRNB-D | RTU media interworking using AMRNB. Use license to enable AMR-NB audio transcoding. (DSP modules required) Note: Both DSP-AMRNB-D and VDSP-RTU-D licenses are required to transcode AMR-NB for SBC SWe. |
DSP-AMRWB-D | RTU media interworking using AMRWB. Use license to enable AMR-WB audio transcoding. (DSP modules required) |
DSP-EVRC-D | RTU media interworking using EVRC. Use license to enable EVRC audio transcoding. (DSP modules required) Note: This license is not applicable to SBC SWe because EVRC is not supported. |
DSP-SILK-D | RTU media interworking using SILK. Use license to enable SILK transcoding. (DSP modules required) |
DSP-EVS-D | RTU media interworking using EVS. Use license to enable EVS transcoding. (DSP modules required) |
SWE-INSTANCE-D | Required to run SBC software in an SBC SWe environment. |