Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 2

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

width24px
Noprint
Panel
borderColorgreen
bgColortransparent
borderWidth2

Back to Table of Contents

Back to Installing SBC 5000 Series Hardware

Back to Rack Mounting the SBC 5000 Series Chassis

...

Panel

In this section:

Table of Contents
maxLevel2
minLevel2

 

This section provides information on the 

Spacevars
0series
package content and required tools to rack mount the SBC platform.

Required Tools

Before you install the

...

Spacevars
0product
 chassis into a rack, make sure that you have the following tools and equipment:

  • #2 Phillips screwdriver (to install brackets and the chassis)
  • 7/16" (11 mm) wrench (to attach earth ground lug)
  • Label maker (to label cables, if needed)
  • Voltmeter (for installing units with DC power supplies)
  • A marker or masking tape to mark mounting holes

SBC 5000 Series Package Content

Before you install a new

Spacevars
0series
chassis, unpack and inspect your equipment and hardware to verify you have all the necessary items to install your
Spacevars
0series
chassis.

Accessory Kit

The following table provides the list of Bill of Materials (BOMs) provided with the 

Spacevars
0series
Accessory Kit.

Caption
0Table
1BOM Details

BOM Level

Item Number

Item Description

Item Rev

Qty

1

300-30016

LUG 2 HOLE ,#6 AWG WIRE, 45° ANGLE TONGUE, 1/4" STUD HOLE, 5/8" HOLE SPACING

01 CCN-00190

1

1

301-31150

15PIN FEMALE D-SUB SOLDER STYLE

02 CCO-01674

1

1

301-31151

METAL HOOD FOR 2 ROW 15 PIN D-SUB

02 CCO-01674

1

1

401-00119

CABLE, 9 POS DSUB M-F NULL, MOULDED- 3M.-ROHS

02 CCO-01525

1

1

401-00119

NA

NA

1

1

401-00119

NA

NA

1

1

401-00119

NA

NA

1

1

510-00038

ESD WRIST STRAP Image Modified

01 CCO-510-00038

1

1

510-00038

NA

NA

1

1

510-00038

NA

NA

1

1

510-00056

WASHER, 1/4 SPLIT LOCK STLS STL-ROHS

1

2

1

510-00057

WASHER, FLAT- 1/4 REG STLS STL-ROHS

1

2

1

511-00046

NUT, HEX 1/4-20 STL STEEL-ROHS

01 ECO-00459

2

1

933-00450

ASSEMBLY NOTES SBC5X00 ACCESSORY KIT

NA

NA


Note

Carefully remove the contents from the shipping container, and check each item for damage. The

Spacevars
0series
is shipped with the items listed below. If any item is missing or damaged, contact your Sonus representative for support.

Universal Rack Mount Kit

The following items are included in each Universal Rack Mount Kit:

ItemQuantity
Chassis Rails2
Rack Rail Guides2
Chassis Rack Ears2
19" to 23" Rack Adaptors4
Rack Mount Brackets4 
#8-32X1/4" Truss Head screws  24 
#10-32X5/16" Flat Head screws  4 
#10-32-5/8" Cup Head screws 20 
#10-32 U-Nuts 12 

 The following figure describes the Universal Rack Mount Kit contents.

Caption
0Figure
1Universal Rack Mount Kit

Image Modified