Page History

...

1. Log on to the EMS SWe and open the Cluster/VNF Management.

2. Create a cluster for

   Spacevars
   0 product2

   . Select the created cluster and Click the Configurations tab. The following screen appears:

   Caption
   0 Figure 1 Cluster/VNF Management
   Image Modified

3. Click New Configuration. The following screen appears:

   Caption
   0 Figure 1 SBC Manager Home Page
   Image Modified

   
   The details of the Configurator is visible when the Configurator instance is spawned through HEAT Template on OpenStack as well as Application Orchestrator in EMS.
   
   

4. Click Create. The following screen appears:

   Caption
   0 Figure 1 SBC SWe Configuration Create
   Image Modified Image Modified

5. Click Open Editor. The SBC Configurator GUI is displayed:

   Caption
   0 Figure 1 SBC Configuration Manager Home Page
   Image Modified

6. Navigate through All > System > PolicyServer > LocalServer. Select the PSX_LOCAL_SERVER. Change the State to Disabled and Mode as Out of Service.

7. Click Save.
   

   Caption
   0 Figure 1 Local Server
   Image Modified

8. The created Local Server is displayed.

   Caption
   0 Figure 1 Created Local Server
   Image Modified

9. Navigate through All > System > Policy Server > Remote Policy Server. The following screen appears:

   Caption
   0 Figure 1 Remote Policy Server
   Image Modified

10. Click New Remote Server and add the required values, for example:

    1. Enter Name as Cluster name (PSX_15).

    2. Enter FQDN of PSX Cluster, for example "psx2.sonusnet.com".

    3. Check the radio button for Enabled.

    4. Change the Mode to Standby.

       Caption
       0 Figure 1 Remote Policy Server Values
       Image Modified

    5. Click Save.

       Caption
       0 Figure 1 Remote Policy Server List
       Image Modified

       Note
       Create another Remoter Server with the following details: Name: PSX_14 FQDN: For example psx1.sonusnet.com Mode: Active

       
       The PSX Master cluster FQDN is added to the SBC Configurator.

       Note
       You may configure either the FQDN or IP address, but not both. maxPolicyServerCount is the number of IP addresses that SBC picks and registers with from the FQDN resolution result. The default value is 1.

       Pagebreak

...