Versions Compared

Old Version 5

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 6

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH1eyoustra
REV5bscoggins
REV6bscoggins
REV3skeerthy
REV1vmishra

Use the the QOS Values window to define Differentiated Services Code Point (DSCP) values for the selected Packet Service Profile to apply to different packet types on egress. This configuration applies when a call is not identified as an HPC (High Priority Call) and therefore not subject to an HPC profile. 

To View and Edit QOS Values

On the SBC main screen, go to Configuration > Profile Management > Category: Media Profiles > Packet Service Profile > QOS Values or
All > Profiles > Media > Packet Service Profile > QOS Values.

Select the desired Packet Service Profile from the drop-down list to view its respective QOS Values parameters. The QOS Values window opens.

Caption
0Figure
1Packet Service Profile - QOS Values

Image Modified

The following fields are displayed:

Caption
0Table
1Packet Service Profile - QOS Values

Parameter

Description

Msrp DscpSpecifies the DSCP value to use for MSRP packets that egress the SBC. The value ranges from 0 to 63 and the default value is 0.
DTLS SCTP DscpSpecifies the DSCP value to use for DTLS/SCTP packets that egress the SBC. The value ranges from 0 to 63 and the default value is 0.
T140DscpSpecifies the DSCP value to use for T.140 text packets that egress the SBC. The value ranges from 0 to 63 and the default value is 0.

Make any required changes and click Save.

Pagebreak