This object specifies the Lwresd Profile configuration.
To View
...
Lwresd Profile
On SBC main screen, go navigate to All > Global > Servers > Lwresd Profile. The Lwresd
The Lwresd Profile window is displayeddisplays.
| Caption |
|---|
|
 Image Modified
|
| Note |
|---|
|
Currently, SBC supports only one Lwresd Profile (DEFAULT). Deletion of the default profile is not allowed. |
| Anchor |
|---|
| To Edit Lwresd Profile |
|---|
| To Edit Lwresd Profile |
|---|
|
To Edit Lwresd ProfileTo edit the Lwresd Profile, click the radio button next to the Lwresd Profile.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Lwresd Profile Highlighted |
|---|
|
Image Modified |
The Edit The Edit Selected Lwresd Profile window is displayed below.displays.
Case - 1: The parameter Type is set to Mgmt (default)
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Edit Lwresd Profile --- Type-Mgmt |
|---|
|
Image Added |
Case - 2: The parameter Type is set to IP:
...
| Lwresd Profile --- Type-IP |
|
Image Modified |
The following fields parameters are displayed:
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Lwresd Profile Parameters |
|---|
|
| Parameter | Description |
|---|
Name | Profile name used by the SLWRESD process. The default profile name is DEFAULT. The SLWRESD process uses the ENUM zones configured for performing an ENUM query against Enum Domain Label. | Description | Textual description of Lwresd Profile (length: 1-255 characters). | ENUM Domain Label Name | The ENUM domain name label created for Enum Domain Name Label entity. Use this parameter to associate the Lwresd Profile with a particular Enum Domain Name Label. Currently, SBC supports only one label name (DEFAULT_ZONE_LABEL). | Enable Lwresd Log | Use this flag to enable/disable the LWRESD log.
| Type | Interface type supported by the Policy Server. | Address Context | Address Context for the Policy Server's IP Interface Group. Fore further details on Address Context. refer to Address Context - CLI. Note: - This is an existing parameter, but it's usage in the context of
Lwresd Profile is new. - This parameter is visible in the Edit Selected Lwresd Profile window, only if the parameter
Type is set to IP.
| IP Interface Group | The IP Interface Group used to communicate with the external PSX. For further details on IP Interface Group, refer to IP Interface Group - CLI. Note: - This is an existing parameter, but it's usage in the context of
Lwresd Profile is new. - This parameter is visible in the Edit Selected Lwresd Profile window, only if the parameter
Type is set to IP.
|
|
| Note |
|---|
|
To configure the SBC to use the appropriate interface for handling ENUM Queries, sequentially perform the following configuration steps: For using the Signaling Interface: - Add the intended Static Route to the ENUM server. For further details on creating a Static Route, refer to System Provisioning - Static Route.
- Set the
Type parameter of the Lsresd Profile as IP. See the To Edit Lwresd Profile section in this page. - Add an IP Access Control List (ACL) rule to get the response of the ENUM Queries. For further details on adding ACL rules, refer to Ip Access Control List - Rule.
For using the Management Interface (default): - Delete the Static Route (if any) from the list of Static Routes added to the ENUM Server. For further information on deletion of Static Routes, refer to System Provisioning - Static Route.
- Add the intended Static Route to the ENUM server. For further details on creating a Static Route, refer to System Provisioning - Static Route.
- Set the
Type parameter of the Lwresd Profile as Mgmt. See the To Edit Lwresd Profile section in this page. - Add an IP Access Control List (ACL) rule to get the response of the ENUM Queries. For further details on adding ACL rules, refer to Ip Access Control List - Rule.
|