| Add_workflow_for_techpubs |
|---|
| AUTH1 | eyoustra |
|---|
| REV5 | bscoggins |
|---|
| REV6 | bscoggins |
|---|
| REV3 | mkeshavamurthy |
|---|
| REV1 | gchitteti |
|---|
|
...
Profiles specify parameters to determine when alarms associated with IP policing are generated and cleared.
To View
...
...
Profiles
On the SBC main screen, go to Configuration > Profile Management > Category: System Profiles >
...
IP Policing Alarm Profile.
The
...
IP Policing Alarm Profile window is displayed.
...
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - System Profiles - Ip Policing Alarm Profile |
|---|
|
 Image Removed
|
To Edit Ip Policing Alarm Profile
To edit any of the Ip Policing Alarm Profile in the list, click the radio button next to the specific Ip Policing Alarm Profile name.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - System Profiles - Ip Policing Alarm Profile Highlighted |
|---|
|
Image Removed |
...
A portion of the window is shown below.
...
| IP Policing Alarm Profile |
|
...
Image Removed
|
Image Added |
...
...
an IP Policing Alarm Profile
To create a new
...
IP Policing Alarm Profile, click New
...
IP Policing Alarm Profile
...
on the IP Policing Alarm Profile List
...
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - System Profiles - Ip Policing Alarm Profile Fields |
|---|
|
Image Removed |
...
Policing Alarm Profile window is displayed.
...
| Create New IP Policing Alarm Profile |
|
...
|
Image Modified |
The following fields are displayed:
| Caption |
|---|
| 0 | Table |
|---|
| 1 | IP Policing Alarm Profile Parameters |
|---|
|
Parameter | Description |
|---|
Name | Specify the name of the IP Policing Alarm profile. | Index | A unique identifier. | State | Administrative state of IP Policing alarm profile. | Bad Ethernet IP Header Set Threshold | Specifies the threshold for the bad |
|
...
Ethernet IP header policer discard rate which may set an alarm. The default value is 100. | Bad Ethernet IP Header Clear Threshold | Specifies the threshold for the bad Ethernet IP header policer discard rate which may clear an alarm. The default value is 20. | Bad Ethernet IP Header Set Duration | Specifies the duration (in seconds) that the bad |
|
...
Ethernet IP header policer discard rate must be at or above its set threshold before an alarm is set. The default value is 3. | Bad |
|
...
Ethernet IP Header Clear Duration | Specifies the duration (in seconds) that the bad Ethernet IP header policer discard rate must be at or below its clear threshold before an alarm is cleared. The default value is 3. |
|
...
ARP Set Threshold | Specifies the duration (in seconds) that the bad Ethernet IP header policer discard rate must be at or below its clear threshold before an alarm is cleared. The default value is 100. |
|
...
ARP Clear Threshold | Specifies the threshold for the ARP policer discard rate which may clear an alarm. The default value is 20. |
|
...
ARP Set Duration | Specifies the duration (in seconds) that the ARP policer discard rate must be at or above its set threshold before an alarm is set. The default value is 3. |
|
...
ARP Clear Duration | Specifies the duration (in seconds) that the ARP policer discard rate must be at or below its clear threshold before an alarm is cleared. The default value is 3. | U Flow Set Threshold | Specifies the threshold for the micro flow policer discard rate which may set an alarm. The default value is 100. | U Flow Clear Threshold | Specifies the threshold for the micro flow policer discard rate which may clear an alarm. The default value is 20. | U Flow |
|
...
Set Duration | Specifies the duration (in seconds) that the micro flow policer discard rate must be at or above its set threshold before an alarm is set. The default value is 3. | U Flow |
|
...
Clear Duration | Specifies the duration (in seconds) that the micro flow policer discard rate must be at or below its clear threshold before an alarm is cleared. The default value is 3. |
|
...
ACL Set Threshold | Specifies the threshold for the access control list (ACL) policer discard rate which may set an alarm. The default value is 100. |
|
...
ACL Clear Threshold | Specifies the duration (in seconds) that the access control list policer discard rate must be at or below its clear threshold before an alarm is cleared. The default value is 3. |
|
...
ACL Set Duration | Specifies the duration (in seconds) that the access control list policer discard rate must be at or above its set threshold before an alarm is set. A value of 0 sets the alarm immediately. |
|
...
ACL Clear Duration | Specifies the duration (in seconds) that the access control list policer discard rate must be at or below its clear threshold before an alarm is cleared. A value of 0 clears the alarm immediately. | Aggregarte Set Threshold | Specifies the threshold for the aggregate policer discard rate which may set an alarm. The default value is 100. | Aggregarte Clear Threshold | Specifies the threshold for the aggregate policer discard rate which may clear an alarm. The default value is 20. | Aggregate Set Duration | Specifies the duration (in seconds) that the aggregate policer discard rate must be at or above its set threshold before an alarm is set. The default value is 3. | Aggregate Clear Duration | Specifies the duration (in seconds) that the aggregate policer discard rate must be at or below its clear threshold before an alarm is cleared. A value of 0 clears the alarm immediately. | IP Sec |
|
...
Decrypt Set Threshold | Specifies the threshold for the IPSEC decrypt policer discard rate which may set an alarm. The default value is 100. | IP Sec Decrypt Clear Threshold | Specifies the threshold for the IPSEC decrypt policer discard rate which may clear an alarm. The default value is 20. | IP Sec |
|
...
Decrypt Set Duration | Specifies the duration (in seconds) that the |
|
...
IPSec decrypt policer discard rate must be at or above its set threshold before an alarm is set. The default value is 3. | IP Sec Decrypt Clear Duration | Specifies the duration (in seconds) that the |
|
...
IPSec decrypt policer discard rate must be at or below its clear threshold before an alarm is cleared. The default value is 3. | Media Set Threshold | Specifies the threshold for the media policer discard rate which may set an alarm. The default value is 100. | Media Clear Threshold | Specifies the threshold for the media policer discard rate which may clear an alarm. The default value is 20. | Media |
|
...
Set Duration | Specifies the duration (in seconds) that the media policer discard rate must be at or above its set threshold before an alarm is set. The default value is 3. | Media Clear Duration | Specifies the duration (in seconds) that the media policer discard rate must be at or below its clear threshold before an alarm is cleared. The default value is 3. | Rogue Media Set Threshold | Specifies the threshold for the rogue media policer discard rate which may set an alarm. The default value is 100. | Rogue Media Clear Threshold | Specifies the threshold for the rogue media policer discard rate which may clear an alarm. The default value is 20. | Rogue Media Set Duration | Specifies the duration (in seconds) that the rogue media policer discard rate must be at or above its set threshold before an alarm is set. The default value is 3. | Rogue Media Clear Duration | Specifies the duration (in seconds) that the rogue media policer discard rate must be at or below its clear threshold before an alarm is cleared. The default value is 3. | Discard Rule Set Threshold | Specifies the threshold for the discard rule discard rate which may set an alarm. The default value is 20. | Discard Rule Clear Threshold | Specifies the threshold for the discard rule discard rate which may clear an alarm. The default value is 10. | Discard Rule Set Duration | Specifies the duration (in seconds) that the discard rule discard rate must be at or above its set threshold before an alarm is set. A value of 0 sets the alarm immediately. | Discard Rule Clear Duration | Specifies the duration (in seconds) that the discard rule discard rate must be at or below its clear threshold before an alarm is cleared. A value of 0 clears the alarm immediately |
|
...
. | | Srtp Decrypt Set Threshold | The threshold for the SRTP decrypt policer discard rate which may set an alarm. The default value is 20 | | Srtp Decrypt Clear Threshold | The threshold for the SRTP decrypt policer discard rate which may clear an alarm. The default value is 10. | | Srtp Decrypt Set Duration | The duration (in seconds) that the SRTP decrypt policer discard rate must be at or above its set threshold before an alarm is set. The default value is 3. | | Srtp Decrypt Clear Duration | The duration (in seconds) that the SRTP decrypt policer discard rate must be at or below its clear threshold before an alarm is cleared. The default value is 3. |
|
Make changes to the parameter values as needed and click Save to create the profile.
To Edit an IP
...
...
- edit an IP Policing Alarm Profile
...
- , click the radio button next to the
...
- specific IP Policing Alarm Profile name. The Edit Selected IP Policing Alarm Profile
...
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - System Profiles - Ip Policing Alarm Profile Highlighted |
|---|
|
Image Removed |
Click Copy Ip Policing Alarm Profile tab on the Ip Policing Alarm Profile List panel.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - System Profiles - Ip Policing Alarm Profile Fields |
|---|
|
Image Removed |
...
- window is displayed.
- Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
To Copy an IP Policing Alarm Profile
- To copy an IP Policing Alarm Profile, click the radio button next to the specific IP Policing Alarm Profile to highlight the row.
- Click Copy IP Policing Alarm Profile. The Copy Selected IP Policing Alarm Profile window is displayed
...
...
...
Image Removed
...
- Make any changes to the required fields and click Save to save the changes. The
...
- new IP Policing Alarm Profile based on the copied profile is
...
- added at the bottom of the
...
...
an IP Policing Alarm Profile
- To delete any of the created
...
...
- Profiles, click the radio button next to the
...
- specific IP Policing Alarm Profile which you want to delete.
...
...
Image Removed
...
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - System Profiles - Ip Policing Alarm Profile Delete Confirmation |
|---|
|
Image Removed |
- the X at the right end of the highlighted row.
...
...
- confirm the deletion when prompted.