...
Note |
---|
Broadsoft Trunk is applicable only if the user endpoint is an IP phone. |
Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.
Note |
---|
These instructions assume the SBC Easy Config wizard is running. See Using the Easy Configuration Wizard. |
Select the Application type (SIP Trunk ↔ IP Phones). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).
Scenario - Field Definitions
Caption |
---|
|
|
Scenario Parameters
Application
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ IP Phones.
|
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Number of simultaneous SIP sessions allocated. Valid entry 1 - 960. |
SIP Trunk Fields
Name (SIP Trunk)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP trunk used for connection to the IP phones. Valid options: ATT SIP Trunk, Other SIP Trunk, Verizon SIP Trunk, KDDI SIP Trunk, Broadsoft Trunk, SoftBank White Office, and NTT DOCOMO Officelink. The SIP Trunk selected determines the field options displayed in Step 2. See Step 2 - Configure SIP Details for Endpoint. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
IP Phone Registrar. This field is fixed. |
...
Step 2 - Configure SIP Details for Endpoint
Enter the scenario configuration details based on your endpoint. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).
These fields apply if you selected AT&T SIP Trunk in Step 1 - Select Scenario.
...
...
Caption |
---|
|
Image Modified |
Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or IP address of the Session Border Controller service provider. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the () icon. Enter the Network IP and Network Mask and click OK. |
panel |
|
Caption |
---|
|
Image Modified |
KDDI SIP Trunk - Field Definitions
...
These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.
...
...
Caption |
---|
0 | Figure |
---|
1 | KDDI SIP Trunk |
---|
3 | KDDI SIP Trunk |
---|
|
Image Modified |
SIP Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or IP address of the Session Border Controller service provider. |
...
Caption |
---|
0 | Figure |
---|
1 | Add Split DNS Entry |
---|
|
|
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan (IP Phone Registrar)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. For SIP Registrar, refer to |
Number of Users
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Define the number of users. Valid entry 1 - 1000. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. |
NTT DOCOMO Officelink - Field Definitions
These fields apply if you selected NTT DOCOMO Officelink Trunk in Step 1 - Select Scenario.
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port number used for sending and receiving SIP messages between the SBC and the SIP Server. Default value: 5062. |
CUG Domain Name
...
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
...
IP Phone Numbering Plan
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. - Network IP. IP address for the destination host or subnet in which the IP phone resides.
- Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the ( Image Removed) icon. Enter the Network IP and Network Mask and click OK. Caption |
---|
| Image Removed |
|
Other SIP Trunk - Field Definitions
These fields apply if you selected Generic SIP Trunk in Step 1 - Select Scenario.
Section |
---|
Column |
---|
| Panel |
---|
| Caption |
---|
| Image Removed |
|
|
|
Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or IP address of the Session Border Controller service provider. |
Protocol (Border Element Server)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol to use for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP. |
Port Number (Border Element Server)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
Use Secondary Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables or disables the secondary Session Border Controller service provider configured. |
Secondary Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
Protocol (Secondary Border Element Server)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
Port Number (Secondary Border Element Server)
...
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
...
The FQDN of the SIP Server. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. - Network IP. IP address for the destination host or subnet in which the IP phone resides.
- Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the ( Image Removed Image Added) icon. Enter the Network IP and Network Mask and click OK. |
Caption |
---|
|
Image Modified |
...
SoftBank White Office - Field Definitions
These fields apply if you selected SoftBank White Office in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | SoftBank White Office |
---|
|
|
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, specify: GatewayID@SIPServer. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the number of users. Valid entry 1 - 1000. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the () icon. Enter the Network IP and Network Mask and click OK. |
Caption |
---|
|
Image Modified |
Telstra Enterprise SIP Connect - Field Definitions
These fields apply if you selected Telstra Enterprise SIP Connect in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | Telstra Enterprise SIP Connect Trunk |
---|
|
|
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the number of users. Valid entry 1 - 1000. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( ) icon. Enter the Network IP and Network Mask and click OK. Caption |
---|
|
|
|
...
Verizon SIP Trunk - Field Definitions
...
...
These fields apply if you selected Verizon Managed Service in Step 1 - Select Scenario.
...
Caption |
---|
0 | Figure |
---|
1 | Verizon SIP Trunk |
---|
|
Image Modified |
Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or IP address of the Session Border Controller service provider. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.Server. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Define the number of users. Valid entry 1 - 1000. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the () icon. Enter the Network IP and Network Mask and click OK. |
Panel |
---|
borderStyle | none |
---|
Caption |
---|
|
Image Modified |
Broadsoft Trunk - Field Definitions
...
These fields apply if you selected Broadsoft Trunk in Step 1 - Select Scenario.
...
...
Caption |
---|
|
Image Modified |
Server Domain
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN of the server domain. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables/disables Enterprise Trunking. This field is available only when Enterprise Trunking is selected in the Broadsoft Trunk Type field. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Define the number of users. Valid entry 1 - 1000. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( ) icon. Enter the Network IP and Network Mask and click OK. |
Caption |
---|
|
|
This steps displays a summary of the the configuration items from Step 1 and Step 2. Click Finish (to cancel the configuration, click Cancel).
This example displays a SIP ↔ IP Phones with a Generic SIP Trunk.
...
Caption |
---|
|
Image Modified |