Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 2

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_docset_workflow
AUTH2UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca7f046c, userName='null'}
AUTH1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26c85b00e8, userName='null'}
DEV1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca7d045b, userName='null'}
LDEV1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd5909df, userName='null'}
SVT1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26c8c30174, userName='null'}
LSVT1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd5909df, userName='null'}

Panel

In this section:

Table of Contents
maxLevel4

Info
titleNote

Only an Administrator and a Network Operator can access Troubleshooting setting (enabling/disabling). However, Guest User can view the CDR Viewer page and if enabled by the Administrator/Network Operator, Guest User can perform all the operations on the CDR Viewer page. If this option is disabled, the Guest User cannot enable Troubleshooting settings.

The CDR Viewer page is restricted for other User Groups like Security Auditor and Calea Users.

EMA UI Menu

On the

Spacevars
0product
 main screen, navigate to Troubleshooting > Troubleshooting Tools > CDR Viewer.

Caption
0Figure
1CDR Viewer

The following CDR fields are available:

    • Record Type
    • Record Date/Time
    • Calling Number
    • Called Number
    • GCID
    • Call Disconnect Reason
    • Sip Ladder
    • Call Duration 

The user can capture and view the CDR event when polling is enabled. Refer to Dashboard - Live Monitor for more information on polling.

Enabling or Disabling CDR Data Polling

  1. On the
    Spacevars
    0product
     main screen, navigate to Troubleshooting > Troubleshooting Tools > CDR Viewer.
     

  2. To enable/disable CDR Data Polling, click the desired option as shown in the figure Enable-Disable CDR Data Polling. By default, it is Disabled for Troubleshooting page. The CDR records are fetched from ACT records which are generated by the

    Spacevars
    0product
    . If Polling is enabled, the CDR records are captured and stored into Database.

    Caption
    0Figure
    1Enable-Disable CDR Data Polling
    3Enable-Disable CDR Data Polling

    Info
    titleNote

    Enabling CDR Viewer on SBC SWe with less than 6 CPUs and less than 16 GB RAM may impact the system performance.

Filtering the CDR List

Filter the CDR list based on the following fields:

  • Record Type
  • Record Start Date/Time range
  • Call Duration
  • Calling Number
  • Called Number
  • GCID
  • Call Disconnect Reason
Caption
0Figure
1CDR Filter

Viewing CDR Records

Select any CDR record to view the details.

Caption
0Figure
1CDR Details

Search for Specific Text

User can also search (case-insensitive) for a specific text within the record details of a selected CDR record.

Caption
0Figure
1CDR Search Using Find

CDR Data Purge

CDR data is purged either on a Disk or Age basis. The Disk-based purging occurs when the database reaches 20 percent of the evlog partition. The Age-based purging occurs for data older than one week. The user cannot view CDR records (including CDR details) and the SIP Ladder Diagram that are older than one week.

The Disk-based purging always takes precedence over Age-based purging. All users have the ability to view the CDR Viewer page, but only Administrator and the Operators have the ability to change the settings for the CDR Viewer page.

Info
titleNote

The purge limits are set by the system and they are not user-configurable.

SIP Ladder

Info
titleNote
  • SIP Ladder diagrams are generated for calls captured through Level 4 Call Trace Filter. The Level 4 filters are based only on Peer IP Address and it must be specified to trace calls. For more information on Level 4 Call Trace Filter, refer to Call Trace and Packet Capture - Call Trace.
  • SIP Ladder diagrams can be captured at up to 50 CPS.
  • No other trace filters can be running at the same time as the level 4 trace (that is, do not run a level 1, 2, or 3 trace at the same time as the level 4 trace.)
  • Level 4 filters identify GCID when possible. However, some messages do not contain GCIDs and may have 0xfffffffff as the GCID (registration, notify, options ping, and so on).

Enabling or Disabling SIP Ladder

  1. On the
    Spacevars
    0product
     main screen, navigate to Troubleshooting > Troubleshooting Tools > CDR Viewer.      

  2. To enable/disable SIP Ladder, click the desired option as shown in the figure Enable-Disable SIP Ladder. By default, it is Disabled for Troubleshooting page. The CDR records are fetched from ACT records which are generated by the

    Spacevars
    0product
    . If Polling is enabled, the CDR records are captured and stored into Database.

    Caption
    0Figure
    1Enable-Disable SIP Ladder
    3Enable-Disable SIP Ladder

SIP Ladder Diagram 

The SIP Call Ladder Diagram is a tool used to identify faults in calls. Calls are analyzed at a higher level first, and then at lower levels within the components using the SIP Ladder Diagram. To view the SIP Ladder diagram, click the SIP Ladder icon in the Sip Ladder column for a CDR entry in the CDR Call List.

Caption
0Figure
1SIP Ladder Diagram Icon


Caption
0Figure
1SIP Ladder Diagram

 

A SIP Call Ladder Diagram provides the following advantages:

  • Viewing the high level signaling path that includes Originator, Intermediate Destination and Final Destination of calls to know the complete call path.
  • Viewing the SIP Protocol Data Unit (PDU) details either by hovering the mouse on message types or by clicking the message types (INVITE, PRACK, 200 OK,and so on) to further analyze the calls. User can search within the PDU pop-up window.
  • Viewing the signaling call ladder diagram to narrow down any issues in the call.
  • Performing a drill down analysis of a failed call by further extracting the log details which occurred around at that instance. These log details are viewed either on a pop-up window for a quick analysis or downloaded as call logs (.TRC logs) for that instance.
  • Viewing Error Messages, Possible Root Causes and Recommendations. 

A SIP Ladder diagram is not displayed if the Call Trace is not running and if the

Spacevars
0product
 is not processing any calls for a minimum duration of two seconds.

Click the options available in a SIP Ladder Diagram to:

  • View the exact timestamp next to each message (for example, INVITE, 200 OK, ACK and so on) in the SIP Ladder Diagram.
  • View the IP Address and the Port for each leg of the call.
  • View the request type for each message in the call.
  • View and search the SIP PDU for each message in the call. The SIP PDU is shown as a tooltip when you hover the mouse pointer over the horizontal lines of the SIP Ladder diagram.
  • View multiple SIP PDUs on the SIP ladder diagram at the same time.
  • View the log information as a pop-up message when you click the horizontal lines in the SIP Ladder diagram. These log information is downloaded by clicking the Download button in SIP Message detail pop-up window.
  • View and search the log details from the TRC, DBG, and SYS logs for an individual message.
    • The log details will only be displayed for log lines that contain the GCID of the selected call within the selected time period.
    • For the first message, log details are displayed for the time between the message itself and the next message.
    • For the last message, log details are displayed for the time between the previous message and the message itself.
    • For all other message, log details are displayed for the time between the previous message and the next message.
  • Download the log details from the TRC, DBG, and SYS logs for an individual message to a file.
    • The log details will only be displayed all log lines within the selected time period.
    • For the first message, log details are displayed for the time between the message itself and the next message.
    • For the last message, log details are displayed for the time between the previous message and the message itself.
    • For all other message, log details are displayed for the time between the previous message and the next message.
  • Downloaded log contains all log lines. The complete log data can be sent to
    Spacevars
    0company
     for evaluation if required.

  • Display a tooltip with the details of each of the SIP Message when hovered over the horizontal line below the respective SIP message in the SIP Ladder diagram.

    Caption
    0Figure
    1SIP Ladder Tooltip

      

  • The user can download all the messages or the complete SIP PDU, which belong to the same call as presented in the SIP Ladder Diagram in a single file. The SBC provides following information in the complete SIP PDU message:

    • CDRs at the beginning of the file
    • Directions of the messages (ingress/egress or received/sent)
    • Transport protocol (UDP/TCP/TLS/SCTP)
    • Date next to the time (part of timestamp)
    • IP addresses with the port numbers of the senders and receivers

    In SIP Ladder Diagram, Select Download All to download all the messages in a single file. A pop-up window is displayed to download the complete SIP PDU.

    Caption
    0Figure
    1Downloading the Complete SIP PDU


    By default, the complete SIP PDU message opens in .txt format.
    Caption
    0Figure
    1The Complete SIP PDU Message

  • Displays a pop-up window with the SIP PDU when you click the SIP Message. SIP PDU can be downloaded as .text file by clicking the Download button within the pop-up window. The SIP PDU pop-up window contains a search box, which is used to search and highlight the text present in the pop-up window.

    Caption
    0Figure
    1SIP PDU Pop-up Window

    Caption
    0Figure
    1SIP PDU Pop-up Window Showing the Search Box

  • Displays the log information as a pop-up message when you click the horizontal lines in the SIP Ladder diagram. These log information is downloaded by clicking the Download button in SIP Message detail pop-up window. The log information pop-up window contains a search box, which is used to search and highlight the text present in the pop-up window.
     

    Caption
    0Figure
    1Log Information


    Caption
    0Figure
    1Log Information Pop-up Window Showing the Search Box

      

SIP Ladder Performance Tests

The following table lists SIP Ladder performance test results on the 

Spacevars
0product
 ERE based on the following conditions.

  • The data in the table below was generated from tests performed by the
    Spacevars
    0company
     internal testing organization.
  • Testing was done using the SIPP call simulator with simple calls.
  • The tests measured CPU utilization, memory utilization and call failures. For each of the test conditions, there was no system degradation, and call failures were well within the acceptable limit.
  • The SIP ladder diagram was verified to ensure that it was generated correctly under different test conditions.
  • As of release 5.0,  call processing is separated from SIP ladder processing by allocating dedicated CPUs for each process. If the 50 cps limit for call trace is surpassed, SIP ladder processing may be affected with a delay in generating the SIP ladder diagram.
Info
titleNote

The SBC 5xxx logs store approximately 1200 EVENTS per second combined for CDR viewer and SIP ladder functionality. These EVENTS includes CDR START, STOP, INTERMEDIATE, ATTEMPT records from the CDR viewer and all the SIP Requests and response messages from the SIP Ladder Diagram. 

For example, on the SBC 5200 platform, when the traffic is running @ 400 cps, the number of CDR EVENTs generated per second = 800 (400 START + 400 STOP records).

Out of the 1200 supported EVENTS, the SBC receives 800 EVENTS per second for the CDR viewer. Thus, the SBC may log another 400 EVENTS per second for the SIP Ladder Diagram, which includes all the SIP requests and responses.

The basic SIP call contains seven EVENTS (INVITE, 100 Trying, 180, 200, ACK, BYE, 200). With the remaining 400 EVENTS logging available for SIP Ladder Diagram, the SBC supports approximately 50 simultaneous calls per second.

Key:

E - Enabled

D - Disabled

Load Duration/SPAM values are updated once the load is executed.

Caption
0Table
1SIP Ladder Performance Test Results
3SIP Ladder Performance Test Results
SBC Platform   
RAM
(GB)
ERE/ePSX
Live Monitor
Troubleshooting
SIP Ladder
CPS
CHT
(seconds)
Load Duration
(hours) 
510012EREEEE506048
510012EREEDD15010048
510012EREDEE150
(SIP Ladder - 50)		5072
510012EREEED1506096511024ePSXEEE150
(SIP Ladder - 50)		3572
511024EREEEE150
(SIP Ladder - 50)		3590
5200/521024EREEEE450
(SIP Ladder - 50)		70725200/521024ePSXEEE300
(SIP Ladder - 50)		9072
540032EREEEE

435
(SIP Ladder - 35)

10048
7000128EREEEE200
(SIP Ladder - 50)		3012
7000128EREDEE950
(SIP Ladder - 50)		3060
7000128EREEED135011018
SWe (4vCPU)14EREEEE30
(SIP Ladder - 15)		4573
SWe (8vCPU)14EREEEE70
(SIP Ladder - 40)		2677
Caption
0Table
1Column Descriptions
SBC PlatformPlatform on which performance tests was done.
RAMTotal RAM available in the SBC.ERE/ePSXIndicates whether ERE or ePSX was enabled in the SBC.
Live MonitorIndicates whether Live Monitor feature was enabled (E) or disabled (D).
TroubleshootingIndicates whether CDR Viewer feature was enabled (E) or disabled (D).
SIP LadderIndicates whether SIP Ladder feature was enabled (E) or disabled (D).
CPSIndicates Calls Per seconds used. The number in the bracket indicates the calls for which SIP ladder was enabled. For example 150 (SIP Ladder - 50) indicates 150 calls per seconds out of which 50 calls were being traced for SIP ladder diagram. i.e. For 100 calls there were no matching call filter and for 50 of them there were matching call filter and SIP ladder was displayed for these 50 calls.
CHT (seconds)Indicates call hold time in seconds of each call.
Load DurationIndicates duration in hours for which the calls at the specified cps were run.
 

Pagebreak