Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH1UserResourceIdentifier{userKey=8a00a0c85fd202bb0160132c449a0026, userName='null'}
REV5UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb8305e9, userName='null'}
REV6UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb8305e9, userName='null'}
REV3UserResourceIdentifier{userKey=8a00a0c85f4199b1015f7e1be77a0005, userName='null'}
REV1UserResourceIdentifier{userKey=8a00a0c85f4199b1015f7e1be77a0005, userName='null'}

This section describes the hardware and software requirements for SBC SWe Cloud on an OpenStack platform.

Multiexcerpt
MultiExcerptNameOpenStack Requirements

OpenStack Requirements

The SBC SWe supports the following OpenStack environments:

  • Newton with RHOSP 10 and RHEL 7.4
  • Queens with RHOSP 13 and RHEL 7.5
Info
titleNote

The SBC SWe Cloud was tested on OpenStack Queens with RHOSP 13 and RHEL 7.5.

Multiexcerpt
MultiExcerptNameServer Hardware Requirements
Caption
0Table
1Server Hardware Requirements
3Server Hardware Requirement

 

ConfigurationRequirement
Processor

Intel Xeon processors (Nehalem micro-architecture or above) with 6 cores and above (processors should support hyper-threading).

Info
titleNote

Ribbon recommends Westmere (or newer) processors for better SRTP performance. These processors have the AES-NI instruction set for performing cryptographic operations in hardware. 

 RAMMinimum 24 GiB
 Hard DiskMinimum 100 GB
Network Interface Cards (NICs)

Minimum 4 NICs.

Info
titleNote

Make sure NIC has multiNICs havemulti-queue support which enhances network performance by allowing RX and TX queues to scale with the number of CPUs on multi-processor systems.

Info
titleNote

The Intel I350, x540, x550, and 82599 Ethernet adapters are supported for configuring as SR-IOV and DirectPath I/O pass-through devices.

Info
titleNote

The PKT ports must be 10 Gbps SR-IOV enabled portports.

Info
titleNote

6 NICs are required for supporting to support PKT port redundancy.

Multiexcerpt
MultiExcerptNameS-SBC SWe Requirements

The system hosting the SBC SWe must meet the following requirements to achieve the performance targets listed: 

Caption
0Table
1S-SBC SWe Requirement
3S-SBC SWe Requirement
S-SBC SWe Requirements
for 1000 CPS/120K Signaling Sessions 
Notes

32 vCPUs

Due to the workload characteristics, allocate 20 physical cores with two hyper-threaded CPUs from each core to the SBC.

128 GiB RAM

Must be Huge Page memory. The minimum page size is 2048 KiB, but 1048576 is recommended.

100 GB Disk

None

4 vNICs/6 vNICs

Attach MGT0 port to the Management VirtIO Tenant network.

HA port has to be on IPv4 VirtIO Tenant network.

Attach PKT0 and PKT1 ports to SR-IOV and Provider network.

Info
titleNote

All NIC ports must come from the NUMA node 0. The S-SBC SWe instance is hosted on dual-socket physical server with 10 physical cores coming from each NUMA node.

Multiexcerpt
MultiExcerptNameM-SBC SWe Requirements
Caption
0Table
1 M-SBC SWe Requirement
3 M-SBC SWe Requirement
M-SBC SWe Requirements
for 30K Media Sessions
Notes

20 vCPUs

Due to the workload characteristics, allocate 10 physical cores with two hyper-threaded CPUs from each core and from single NUMA node to the SBC.

32 GiB RAM

Must be Huge Page memory. The minimum page size is 2048 KiB, but 1048576 is recommended.

100 GB Disk

None

4 vNICs/ 6 vNICs

Attach MGT0 port to the Management VirtIO Tenant network.

HA port has to be on IPv4 VirtIO Tenant network.

Info
titleNote

All NIC ports must come from the same NUMA node from which the M-SBC SWe instance is hosted.

Multiexcerpt
MultiExcerptNameOAM Node Requirements

 

 

Caption
0Table
1 OAM Node Requirements
3OAM Node Requirement
OAM Node (minimum)Notes

4 vCPUs

None

16 GiB RAM

None

80 GB Disk

None

4 vNICs

None

Multiexcerpt
MultiExcerptNameI-SBC SWe Requirements

 

 

Caption
0Table
1I-SBC SWe Requirement
3I-SBC SWe Requirement
I-SBC SWe RequirementsNotes

20 vCPUs

 

32 GiB RAM

Must be Huge Page memory. The minimum page size is 2048 KiB, but 1048576 is recommended.

100 GB Disk

None

4 vNICs/ 6 vNICs

Attach MGT0 port to the Management VirtIO Tenant network.

HA port has to be on IPv4 VirtIO Tenant network.


Pagebreak