Page History

Enter the Host Name for the SBC. This is typically useful when you plan to join SBC to a domain. This field is required. Refer to Hostname Conventions for hostname rules.

The Easy Setup feature provides a template for end-users to quickly configure and deploy

Options:

Launch on First Login. Easy Setup is launched following initial setup. See Working with SBC Easy Configuration for configuration details.

Do Not Launch. Easy Setup is not launched following initial setup. To configure the Wizard later, see Using the Easy Configuration Wizard.

Enter the IP address through which the SBC communicates over Ethernet. The IP address in this field will be configured onto Ethernet Port #1. This field is required.

This field is displayed when the Network Configuration field is set to Static.

The Netmask which will be applied to the Ethernt 1 IPv4 address.  This field is required.

This field is displayed when the Network Configuration field is set to Static.

Enables or disables the use of an IP address with Ethernet 2. If you select Yes, the IPv4 Address and Netmask fields are visible. This field is required.

Enter the IP address through which the SBC communicates over Ethernet. The IP address in this field will be configured onto Ethernet Port #2. This field is required.

Determines how the ASM configures its network interface. When set to Yes, it enables the ASM to automatically configure its network interface from the DHCP server reachable via the SBC 10002000's Ethernet Port #1. Ensure that the IP address is on the same subnet as those provided by your DHCP server. When set to No, the IPv4 Address field is displayed and the ASM IP address must be entered manually.

This option is set to No by default.

Specify the IPv4 address for the ASM. This field is available only when DHCP Enabled is set to No. This field is required.

Enables/disables the Password Recovery mechanism. If this field is set to Yes, you are able to initiate the password recovery mechanism for loss of the Admin password. For detailed information about recovering a passwords, see Recovering Admin Passwords. Password Recovery is set to No (disabled) by default.

Re-enter the same password for the administrative user as you configured in the Enter Password field. This field is required.

If you plan to use a gateway to route IP traffic from the SBC, set this field to Yes and specify a Gateway IP address. This field is displayed only when Static is selected from the Network Configuration field.

The IP address of the secondary DNS server. This field is displayed only when Use Secondary DNS is set to Yes.

Once you have clicked OK, you may connect the SBC 2000 to your network using Ethernet Port 1. The SBC will now be reachable on its new IP address - you may browse to it now.