REST API Method: POST /rest/ripconfig/{identifier}
Modifies a RIP configuration on the Sonus SBC 1000/2000 system. RIP instance name should not be modified. Logical interface name should be provided for configuring RIP protocol on that interface. If multiple interfaces needs to be configured then the interface name should be comma separated.
URL:
https://134.56.227.163/rest/ripconfig/{identifier}
HTTP Method
POST
Requires Authentication:
true
Parameters
Parameter Name | Required | Service Affecting | Data Type | Default Value | Possible Values | Description |
---|
ConfigIEState | No | Yes | Enum | 1 | Possible values: - 0 - esDISABLED
- 1 - esENABLED
| Specifies the Administrative State of the resource. |
---|
RIPInstanceName | Yes | Yes | string | none | 16 - Max Length | Specifies RIP Protocol instance. |
---|
enableDefaultInfoOriginate | Yes | Yes | Enum | 0 | Possible values: | Specifies whether Default Information Originate is to be enabled or disabled. |
---|
ifName | Yes | Yes | string | none | 500 - Max Length | Specifies logical interface name configured for particular routing instance name. If multiple interfaces need to be configured then the interface names should be comma separated. Tip |
---|
Logical interfaces configured in the system can be obtained by performing a lookup on logicalinterface resource using GET logicalinterface |
|
---|
Tip |
---|
|
The POST can contain either only the attributes that are being updated, or the full set of attributes for the resource |
Code Block |
---|
|
Put code example here |
Response:
Code Block |
---|
|
Put Code response here |