Page History

...

1. Follow the installation and setup instructions in the Quick Start card (SBC 1000 Quick Start or  SBC 2000 Quick Start ) included with the device.
2. Run initial setup. Refer to Running Initial Setup.
3. Determine the software release version installed on the SBC. Refer to Viewing the Software Version and Hardware ID.
4. If required, download the latest software from the Ribbon Support Portal. For instructions, refer to the Ribbon SBC Edge Download Center.
   
   1. SBC Comms – UXCOMMSVC-releaseX.X.X.buildxxx.zip
   2. SBC Software – 

      Spacevars
      0 series

      (sbc1000-release-X.X.X.buildXXX.img), 

      Spacevars
      0 series2

      (sbc2000-release-X.X.X.buildXXX.img).

   3. ASM Roll-up – ASM-ROLLUP-UPDATESXXX-XX.zip

   4. ASM Cumulative Updates – ASM-UPDATES-XXX_YYY-ZZZ_UX1k2k-release3.0.x-and-later.zip  

      Note
      To identify the most current software, see Ribbon Support Portal.

5. Upgrade the SBC Comms. Refer to Upgrading the SBC Communication Service Version.
6. Upgrade the SBC software. Refer to Upgrading or Downgrading the SBC 1000/2000.

7. Upload and apply the ASM Roll-up. Refer to ASM Roll-up Update.

   Info
   To apply the ASM Roll-up, internet access is required. An alternative approach is to apply the ASM updates using a WSUS server deployed by your Enterprise. Refer to Installing a WSUS.

8. For the Skype/Lync SBA, download and apply the latest Cumulative Updates. Refer to Installing Cumulative Updates for Lync SBA.
9. Apply the Ribbon-approved Sophos Antivirus software (if desired). Refer to  Installing Sophos Antivirus and Ransomware Protection on the ASM.

Anchor
RunInitialSetupCCE RunInitialSetupCCE

For Systems with Cloud Connector Edition (CCE)

...

Anchor
InstallExistingASM InstallExistingASM

For Systems with SBA (Survivable Branch Appliance)

...