Page History

...

1. Launch the EMA. See Logging on to EMA in Platform Mode for guidance.

2. Navigate to Administration > System Administration > Software Install/Upgrade tab. The Packages screen displays.

3. Select the Package Name to install and click Install Software.
   

    

   Caption
   0 Figure 1 Selecting SBC Package

   
   The Install Software section expands and displays the Install Version, Management Ports (configured in post-OS installation) and System Configuration details.

   Caption
   0 Figure 1 Install SBC Application

   Note
   The signature file of the SBC package verifies the integrity of the package contents before proceeding with the SBC installation.

4. Enter the System Configuration details.

   1. Select HA Pair in the HA Configuration field.
   2. Select System Name field and enter the system name.
   3. Select Local Hostname and enter local hostname.

   4. Select Peer Hostname and enter peer hostname.
      
      

      Note
      For more information, refer to System Name and Hostname Conventions.

      Caption
      0 Figure 1 Installation Configuration Screen

   5. Choose Active option for Server Role to designate the Active server as the one you are configuring.

   6. Keep default Active Primary CE IP.
   7. Keep default Standby Primary CE IP.
   8. Keep default Inter CE Prefix. The inter CE prefix is the netmask of the network in which the Inter CE IPs are configured.
   9. Use default TIPC NETID value (1500) if no other SBC SWe running in the same subnet.
   10. Select NTP Server IP field and enter the NTP server IP address.
   11. Select NTP Server Time Zone field and enter the NTP time zone.
       
       

5. Click Start Installation.

    

   Caption
   0 Figure 1 Starting the Installation
   Image Modified

6. The installation process starts and displays the installation status on the Installation Log section.

   1. Perform pre-install checks
      
      

      Caption
      0 Figure 1 Pre-Install Checks

   2. Extract package contents

      Caption
      0 Figure 1 Extracting Package Contents

   3. Install SBC service

      Caption
      0 Figure 1 Installing SBC Service

      Note
      The installation checks whether ConnexIP OS version is compatible with the SBC application. If the OS upgrade is required, it performs the OS upgrade first and reboots the server. Once it is rebooted, login into the EMA again to continue with the SBC application.

   4. Initialize SBC service

      Caption
      0 Figure 1 Initialize SBC Service

   5. Update Host Name

      Caption
      0 Figure 1 Updating Host Name

   6. Reboot system

      Caption
      0 Figure 1 Pre-Install Checks
      Image Modified

7. Log on to EMA platform. The new SBC application version displays on the Monitoring > Dashboard > System and Software Info.
   
   

   Caption
   0 Figure 1 Displaying New SBC App Version

8. Verify the system status using Administration > System Administration > Platform Management menu.
   
   

   Caption
   0 Figure 1 Verifying System Status

9. From the EMA, install the SBC licenses required in order to use SBC application and its features. See Managing SBC Licenses for guidance.

    

   Note
   Continue upgrading the standby server once all the status is up and running.

10. Repeat steps 2 through 8 to install the

    Spacevars
    0 prodkey

     application on the Standby peer, but with the following changes to steps 4c to 4e:

    • Step 4c. Enter Standby server name in Local Hostname field, which is typically the System Name with a letter b appended to the end.

    • Step 4d. Enter Active server name for Peer Hostname field, which is typically the System Name with a letter a appended to the end.

    • Step 4e. Choose Standby option for Server Role to designate the Standby server as the one you are configuring.

    Note
    You must use the same System Name and TIPC NETID for both active and standby servers.

    Caption
    0 Figure 1 Configuring Standby Server

...