Page History

Perform the following steps to restore the

1. Log on to the remote server where you have copied the configuration files, as described in Saving the SBC Configuration.

2. Execute the following commands to copy the files to your SBC system:

   Code Block
   language none title Example
   % cd /home/bob/SBC01/config % sftp -oPort=2024 admin@SBC01a Connecting to SBC01a admin@10:54:19.17's password: xxxxxxx sftp> put config_SBC01_20170324_021127.tar.gz /var/log/sonus/sbx/config/

3. To view the saved configuration files, use the following CLI command:

   Code Block
   language none title Example
   admin@SBC01a> show table system savedConfigList INDEX FILE NAME SIZE ---------------------------------------------------------- 1 config_SBC01_20170324_021127.tar.gz 1061 KBytes

4. Log on to SBC CLI, and load the configuration by executing the following CLI command:

   Code Block
   language none title Example
   admin@SBC01a> request system admin SBC01 loadConfig fileName config_SBC01_20170324_021127.tar.gz This command will load the last saved configuration and restart the applications on active/standby servers. Do you want to continue (yes/no) y Proceeding result success reason Starting DB restoration from: config_<server name>_20170324_021127.tar.gz please check /var/log/messages for progress

   Warning
   This command will restart application on both the servers and is service impacting.

   Info
   icon false title Note
   When reloading a saved configuration, make sure the standby server is stable or the server is reachable. If the standby is restarted or rebooted, wait until the server is stable before proceeding. If the standby system crashes before the load config completes, stop the standby server and allow the original active server to come back online as active.