Versions Compared

Old Version 5

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: removed workflow

Add_workflow_for_techpubsAUTH1REV5REV6REV3REV1 

Panel

In this section:

Table of Contents

Panel

Related articles:

Use this window to configure Session Recording Server (SRS) Group Data objects which are components of SRS Group Profiles. An SRS Group Data object specifies configuration for an SRS. When you create an SRS Group Profile you create one initial SRS Group Data object within it. Use this window to create additional SRS Group Data objects for a profile, or to make changes to the group data objects within an SRS Group Profile.

To View SRS Group Data

On the SBC main screen, navigate to All > Global > Servers > Srs Group Profile > Srs Group Data. The Srs Group Data window is displayed.

By default, SRS Group Data objects for "All Srs Group Profiles" are displayed in the Srs Group Data List window. To see only the SRS Group Data for a particular SRS Group Profile, select the name of the profile in the Srs Group Profile list.

Caption
0Figure
1Srs Group Data

To Create an SRS Group Data Object

  1. In the Srs Group Profile list, select the Srs Group Profile to which you want to add an SRS Group Data object. When "All Srs Group Profiles" is selected you cannot create a new Srs Group Data object.

  2. Click New Srs Group Data on the Srs Group Data List window. The Create New Srs Group Data window is displayed.

    Caption
    0Figure
    1Create New Srs Group Data

  3. Enter values for the object using the following table and click Save. The new SRS Group Data object is created and associated with the profile you selected.

Caption
0Table
1SRS Group Data Parameters
ParameterLength/RangeDescription
Priority0-7The index number for this SRS group data configuration. The SBC supports up to eight SRS group data configurations within a profile.
TransportN/AThe transport type for this SRS.
  • TCP
  • TLS
  • UDP (default)
IP AddressIPv4 or IPv6Signaling IP address of this SRS (The values "0.0.0.0" or "0::0" are not allowed)
IP Port0 - 65535TCP/TLS/UDP port for this SRS
IP TGIDN/AIP Trunk Group ID used to initiate the session towards the SRS.
SrtpN/A

Specifies whether or not SRTP is enabled for the SRS. The options are:

  • Disable (default) - the SRTP packets received from the participant are decrypted and sent to the recorder.
  • Enable - the media towards the recorder is encrypted.
Crypto Suite Profile1-23 characters

Specifies the name of the Crypto Suite Profile.

When specified, the encryption technique towards SRS utilizes the crypto suite of the SBC (the crypto suite of the CS is discarded).
If  a Crypto Suite Profile is not configured, the encryption technique towards the SRS utilizes the negotiated crypto suite details of the respective CS tap leg (ingress tap leg/egress tap leg).
Note: SRTP must be enabled for this option to be available.

To Edit an SRS Group Data Object

  1. Select an SRS Group Data object by clicking the radio button adjacent to it in the Srs Group Data List window. The Edit Selected Srs Group Data window is displayed.

  2. Make changes and click Save.

To Copy an SRS Group Data Object

  1. Select an SRS Group Data object by clicking the radio button adjacent to it in the Srs Group Data List window.

  2. Click Copy Srs Group Data on the Srs Group Data List window. The Copy Selected Srs Group Data window is displayed.

  3. Make changes and click Save.

To Delete an SRS Group Data Object

  1. Select the SRS Group Data object by clicking the radio button adjacent to it in the Srs Group Data List window.

  2. Click the X on the right end of the selected row.

  3. Confirm the deletion when prompted.

Pagebreak