Use the DSP Usage Interval Statistics window to view DSP resource usage, per codec, for a series of statistics intervals. To set the statistics time interval and the number of intervals to report, refer to System - Interval Statistics.
On the
This object specifies the Sonus DSP Resource Interval table.
On SBC main screen, go to Monitoring > System > Category: System Status and Statistics > Dsp DSP Res > Dsp DSP Usage Interval Statistics. The Dsp Statistics or
All > System > DSP Res > DSP Usage Interval Statistics
The DSP Usage Interval Statistics window opens.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | DSP Usage Interval Statistics |
|---|
|
 Image Added
|
The following output is displayed:
...
...
| DSP Usage Interval Statistics |
|
...
Image Removed
By default only ten entries are displayed in a view. You can choose the number of entries to be displayed under the Show entries drop down box. Click Image Removed to expand the window to display more fields.
| Parameter | Description |
|---|
| Number | Specifies a sequence number which identifies the interval for which the set of statistics is shown. | | System Name | The node name. | | Interval Valid | A setting of 'true' indicates the interval contains valid data during the time interval. Each interval is for a configurable fixed time (default interval is 15 minutes) starting on the hour. For example, if the system starts at 12:05, the first interval at 12:15 will not be valid because it is less than the 15-minute interval. Subsequent intervals will be valid upon meeting the 15-minute time interval. System switch-overs also cause invalid intervals because data is lost during the interval. | | Time | System up time when the interval statistics were collected. | The following statistics appear for each codec. Statistics are collected once per second. - <codec>Peak Used Count – The peak number of resources used for the specified codec since the SBC started up.
- <codec>Average Used Count – The running average number of used DSP resources for the specified codec since the SBC started up.
- <codec>Average Avail Count – The running average number of free DSP resources for the specified codec since the SBC started up.
The following codecs appear: - G729
- G726
- G711Packet
- G723
- Ilbc
- Evrcb0
- Amr
- Amrwb
- G722
- Tone
- Evrc
- G7221
- Efr
- Opus
- Silk8
- Silk16
|
|