Versions Compared

Old Version 11

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 12

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Panel

In this section:

Table of Contents
maxLevel32

 

Include Page
Call_Stats_Terms
Call_Stats_Terms

Excerpt Include
Resource Monitoring and Statistics
Resource Monitoring and Statistics
nopaneltrue

Include Page
IntervalStatsMustMatchEMS
IntervalStatsMustMatchEMS

Include Page
Stats_results_limited_in_AC
Stats_results_limited_in_AC

Command Syntax

Table of Contents
maxLevel4
minLevel4
typeflat

The command syntax of the objects related to the show status addressContext command is shown below. 

 

CAC Offender Status

Command Syntax

Code Block
languagenone
> show status addressContext <addressContext_name> name>
	cacOffenderStatus
	dnsGroup<index number>
	dynamicBlackListegressCallRejects
	ipAccessControlListegressMessageRejects 
	ipInterfaceGroupegressNotifyRejects
	ipRouteStatusegressOptionsRejects 
	ipsecegressOtherRequestRejects
	linkDetectionGroupegressReferRejects 
	linkDetectionGroupStatisticsegressSubscribeRejects 
	linkDetectionGroupStatusfirstRejectAt
	logicalSigAddressBindingStatusingressCallRejects 
	sipActiveGroupRegStatusingressMessageRejects
	sipActiveGroupRegSummaryStatusingressNotifyRejects 
	sipActiveRegisterNameStatusingressOptionsRejects
	sipDeletedRegStatusingressOtherRequestRejects 
	sipDeletedRegisterNameStatusingressReferRejects
	sipRegCountStatisticsingressSubscribeRejects
	sipSubCountStatisticsipAddress
	sipSubscriptionStatuslastRejectAt 
	surrRegCountStatisticsmessageFirstRejectAt 
	zonemessageLastRejectAt
	zoneCurrentStatistics
	zoneIntervalStatistics
	zoneStatus

 

Command syntax for the above objects is defined in greater detail below.

cacOffenderStatus

Code Block
> show status addressContext <addressContext_name> cacOffenderStatus
	<index number>
	egressCallRejects
	egressMessageRejects 
	egressNotifyRejects
	egressOptionsRejects 
	egressOtherRequestRejects
	egressReferRejects 
	egressSubscribeRejects 
	firstRejectAt
	ingressCallRejects 
	ingressMessageRejects
	ingressNotifyRejects 
	ingressOptionsRejects
	ingressOtherRequestRejects 
	ingressReferRejects
	ingressSubscribeRejects
	ipAddress
	lastRejectAt 
	messageFirstRejectAt 
	messageLastRejectAt
	notifyFirstRejectAt
	notifyLastRejectAt 
	optionsFirstRejectAt 
	optionsLastRejectAt
	otherFirstRejectAt 
	otherLastRejectAt
	referFirstRejectAt 
	referLastRejectAt
	subscribeFirstRejectAt 
	subscribeLastRejectAt
	zoneId

 

dnsGroup
notifyFirstRejectAt
	notifyLastRejectAt 
	optionsFirstRejectAt 
	optionsLastRejectAt
	otherFirstRejectAt 
	otherLastRejectAt
	referFirstRejectAt 
	referLastRejectAt
	subscribeFirstRejectAt 
	subscribeLastRejectAt
	zoneId

Multiexcerpt include
MultiExcerptNameCACOffenderStatus
PageWithExcerptShow Table Address Context

Diameter Node

Command Syntax

Code Block
languagenone
> show status addressContext <addressContext_name> diamNode <diamNode name>
	diamPeerStatus
	dumpPdu
	ipInterfaceGroupName
	ipV4Address
	ipV6Address
	originRealm
	peer
	primaryOriginHost
	realmRoute
	rfCurrentStatistics
	rfIntervalStatistics
	secondaryOriginHost
	state 
	transactionTimeouts

Multiexcerpt include
MultiExcerptNameDiameterNode
PageWithExcerptShow Table Address Context

DNS Group

Command Syntax

Code Block
languagenone
> show status addressContext <addressContext_name> dnsGroup 
	<dnsGroup name>
		dnsEntryDataStatus
		dnsEntryStatus
		dnsServerStatistics
dynamicBlacklist

Multiexcerpt include
MultiExcerptNameDNSGroup
PageWithExcerptShow Table Address Context

Dynamic Blacklist

Command Syntax

Code Block
languagenone
> show status addressContext <addressContext_name> dynamicBlackList
	dblPolicerStatus
	cumulativeEnforcements
	policerEnforcements
	dblStatus
	currentAction <blacklist | watch>
	discardPacketCount
	effectivePeriodRemaining
	trunkGroup

 

intercept

Multiexcerpt include
MultiExcerptNameDynamicBlacklist
PageWithExcerptShow Table Address Context

Intercept

Command Syntax

Code Block
languagenone
>  show status addressContext <addressContext_name> intercept 
	callDataChannel 
	interceptCallDataChannelStatistics
ipAccessControlList

Multiexcerpt include
MultiExcerptNameIntercept
PageWithExcerptShow Table Address Context

 

IP Access Control List

Command Syntax

Code Block
languagenone
> show status addressContext <addressContext_name> ipAccessControlList 
	defaultAclStatistics
	getAggrPolicers 
	ipAclOverallStatisticsipAclOverall
	ipAclRuleStatisticsipAclRule
	ipAclRulesByPrecedence
	rule

 

ipInterfaceGroup
 Multiexcerpt include
MultiExcerptNameIPAccessControlList
PageWithExcerptShow Table Address Context
IP Interface Group
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> ipInterfaceGroup <IG name> 
	ipInterfaceStatusipInterface
		<IP Interface name>ipInterfaceStatus
		actualBandwidthipsec
		allocatedBandwidthmediaPortRangeAssigned
		bwDeviationmediaPortRangeUnassigned
		ifindex
		numMediaStreams
		oosReason
		operState
		rxPackets
		txPackets
ipRouteStatus
tcpPortRangeAssigned
	tcpPortRangeUnassigned
 Multiexcerpt include
MultiExcerptNameIPInterfaceGroup
PageWithExcerptShow Table Address Context
IP Route Status
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> ipRouteStatus <system name> <ip address> <prefix> 
	protocol <bbnSpfIgp | bgp | ciscoEigrp | ciscoIgrp | egp | esIs | ggp | hello | icmp | idpr | isIs | local | netmgmt | ospf | other | rip>
 
ipsec
 Multiexcerpt include
MultiExcerptNameIPRouteStatus
PageWithExcerptShow Table Address Context
IPsec
 Info
The following objects only apply when using the 
 Link_in_new_tab
Textshow table addressContext
URLShow Table Address Contex
 command:
peer, spd
Command Syntax
 Code Block
languagenone
>  show status addressContext
 Code Block
languagenone
>  show status addressContext <addressContext_name> ipsec 
	ikeSaStatistics
	ikeSaStatus
	ipsecSaStatistics
	ipsecSaStatus
	systemStatistics
linkDetectionGroup
 Multiexcerpt include
MultiExcerptNameIPsec
PageWithExcerptShow Table Address Context
Link Detection Group
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> linkDetectionGroup
	linkDetectionGroup
	linkDetectionGroupStatistics
	linkDetectionGroupStatus
linkDetectionGroupStatistics
 Multiexcerpt include
MultiExcerptNameLinkDetectionGroup
PageWithExcerptShow Table Address Context
Link Detection Group Statistics
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> linkDetectionGroupStatistics <Link Detection Group name> 
	doubleFailures
	failures
	singleFailures
 
linkDetectionGroupStatus
 Multiexcerpt include
MultiExcerptNameLinkDetectionGroupStatistics
PageWithExcerptShow Table Address Context
 
Link Detection Group Status
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> linkDetectionGroupStatus <Link Detection Group name> failures
logicalSigAddressBindingStatus
 Multiexcerpt include
MultiExcerptNameLinkDetectionGroupStatus
PageWithExcerptShow Table Address Context
Logical Signal Address Binding Status
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> logicalSigAddressBindingStatus <ip interface>
sipActiveGroupRegStatus
 Multiexcerpt include
MultiExcerptNameLogicalSigAddressBindingStatus
PageWithExcerptShow Table Address Context
Relay Current Statistics
Command Syntax 
 Code Block
languagenone
> show status addressContext <addressContext_name> sipActiveGroupRegStatus <id>
aorName | contactURI | creationTime | extExpirationTime | intExpirationTime | nextHopIpAddress | nextHopPortNum | regIdIsChild | registrarDomainName | registrarIpAddress | registrarPortNum | state
 
sipActiveGroupRegSummaryStatus
relayCurrentStatistics
 Multiexcerpt include
MultiExcerptNameRelayCurrentStatistics
PageWithExcerptShow Table Address Context
Relay Interval Statistics
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> sipActiveGroupRegSummaryStatus <registrar ip address>
	aorName
	nextRegIdIsChild
	state 
sipActiveRegisterNameStatus
relayIntervalStatistics
 Multiexcerpt include
MultiExcerptNameRelayIntervalStatistics
PageWithExcerptShow Table Address Context
Relay Session Statistics
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> relaySessionStats
 Multiexcerpt include
MultiExcerptNameRelaySessionStatistics
PageWithExcerptShow Table Address Context
SIP Active Group Registration Status
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> sipActiveGroupRegStatus <id>
aorName | sipActiveRegisterNameStatus <aor name>
contactURI | creationTime | e2aeMediaSecurityextExpirationTime | endPointBehindNaptintExpirationTime | externalExpirationTimenextHopIpAddress | internalExpirationTimenextHopPortNum | isRoaming | natPinholeLearningStatus |  nextHopIpAddress | nextHopPortNumregIdIsChild | registrarDomainName | registrarIpAddress | registrarPortNum | securityMechanismType | state
sipDeletedRegStatus
 Multiexcerpt include
MultiExcerptNameSIPActiveGroupRegistrationStatus
PageWithExcerptShow Table Address Context
SIP Active Group Register Summary Status
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> sipActiveGroupRegSummaryStatus sipDeletedRegStatus<registrar ip <id>address>
	aorName | contactURI | creationTime | nextHopIpAddress | nextHopPortNum | reasonCode | registrarDomainName | registrarIpAddress | registrarPortNum | terminationTime
 
sipDeletedRegisterNameStatus

	nextRegIdIsChild
	state 
 Multiexcerpt include
MultiExcerptNameSIPActiveGroupRegistrationSummaryStatus
PageWithExcerptShow Table Address Context
SIP Active Register Name Status
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> sipDeletedRegisterNameStatussipActiveRegisterNameStatus <aor name>
	contactURI | creationTime | nextHopIpAddresse2aeMediaSecurity | nextHopPortNumendPointBehindNapt | reasonCodeexternalExpirationTime | registrarDomainNameinternalExpirationTime | registrarIpAddressisRoaming | registrarPortNumnatPinholeLearningStatus | terminationTime
sipRegCountStatistics
 Code Block
languagenone
> show status addressContext <addressContext_name> sipRegCountStatistics entry
	sipEmergencyRegAcceptTotal
	sipEmergencyRegActiveTotal
	sipRegCountAttempts
	sipRegCountCumCompletions
	sipRegCountPending
	sipRegCountStable
	sipRegCountTotal
sipSubCountStatistics
 nextHopIpAddress | nextHopPortNum | registrarDomainName | registrarIpAddress | registrarPortNum | securityMechanismType | state
 Multiexcerpt include
MultiExcerptNameSIPActiveRegisterNameStatus
PageWithExcerptShow Table Address Context
SIP Deleted Registration Status
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> sipSubCountStatistics entry 
	sipSubCountAttempts
	sipSubCountCumCompletions
	sipSubCountPending
	sipSubCountStable
	sipSubCountTotal
 
sipSubscriptionStatus
sipDeletedRegStatus <id>
aorName | contactURI | creationTime | nextHopIpAddress | nextHopPortNum | reasonCode | registrarDomainName | registrarIpAddress | registrarPortNum | terminationTime
 Multiexcerpt include
MultiExcerptNameSIPDeletedRegistrationStatus
PageWithExcerptShow Table Address Context
SIP Deleted Register Name Status
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> sipSubscriptionStatussipDeletedRegisterNameStatus <aor <id>name>
callId	contactURI | expirationTimecreationTime | nextHopIpAddress | nextHopPortNum | origEPDomainreasonCode | previousHopIpAddressregistrarDomainName | previousHopPortNumregistrarIpAddress | serverDomainNameregistrarPortNum | state
surrRegCountStatistics
terminationTime
 Multiexcerpt include
MultiExcerptNameSIPDeletedRegisterNameStatus
PageWithExcerptShow Table Address Context
SIP Generated Subscription Status
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> surrRegCountStatistics entry
	surrRegActiveRegCount
	surrRegConfiguredCount
 
zone
default sipGeneratedSubscriptionStatus
 Multiexcerpt include
MultiExcerptNameSIPGeneratedSubscriptionStatus
PageWithExcerptShow Table Address Context
SIP Registration Count Statistics
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> zonesipRegCountStatistics <zone name>entry
	callCurrentStatisticssipEmergencyRegAcceptTotal
	callFailureCurrentStatistics sipEmergencyRegActiveTotal
	callFailureIntervalStatisticssipRegCountAttempts
	callIntervalStatisticssipRegCountCumCompletions
	filterSipSrcsipRegCountPending
	filterSipSrcStatistics
	gwSigPortStatistics
	gwSigPortStatus
	h323SigPortStatistics
	h323SigPortStatus
	peerPathchkStatus
	peerQosStatus
	peerSurrRegStatus
	sipArsStatus
	sipCurrentStatistics
	sipIntervalStatistics
	sipOcsCallCurrentStatistics
	sipOcsCallIntervalStatistics
	sipPeerCacStatus
	sipRegAdaptiveNaptLearningStatistics
	sipSigConnStatistics
	sipSigConnStatus 
	sipSigPortStatistics 
	sipSigPortStatus 
	sipSigPortTlsStatistics
	sipSigTlsSessionStatus
	sonusSipSigPeerOvldStatusEntry
	trafficControlCurrentStatistics
	trafficControlIntervalStatistics
	trunkGroupQoeStatus
	trunkGroupStatus
 
zoneCurrentStatistics
sipRegCountStable
	sipRegCountTotal
 Multiexcerpt include
MultiExcerptNameSIPRegistrationCountStatistics
PageWithExcerptShow Table Address Context
SIP Subscription Count Statistics
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> sipSubCountStatistics entry 
	sipSubCountAttempts
	sipSubCountCumCompletions
	sipSubCountPending
	sipSubCountStable
	sipSubCountTotal
 Multiexcerpt include
MultiExcerptNameSIPSubscriptionCountStatistics
PageWithExcerptShow Table Address Context
SIP Subscription Status
Command Syntax
 Code Block
languagenone
> show status addressContext <addressContext_name> zoneCurrentStatisticssipSubscriptionStatus <zone name><id>
egressFailBWLimitcallId | egressFailCallLimitexpirationTime | egressFailCallPolicingnextHopIpAddress | egressSipRegFailLimitnextHopPortNum | egressSipRegPolicingorigEPDomain | ingressFailBWLimitpreviousHopIpAddress | ingressFailCallLimitpreviousHopPortNum | ingressFailCallPolicingserverDomainName | ingressSipRegFailLimit | ingressSipRegPolicing
zoneIntervalStatistics
state
 Multiexcerpt include
MultiExcerptNameSIPSubscriptionStatus
PageWithExcerptShow Table Address Context
Surrogate Registration Count Statistics
Command Syntax
 Code Block
languagenone
 Code Block
> show status addressContext <addressContext_name> zoneIntervalStatistics <counter*>
egressFailBWLimit | egressFailCallLimit | egressFailCallPolicing | egressSipRegFailLimit | egressSipRegPolicing | ingressFailBWLimit | ingressFailCallLimit | ingressFailCallPolicing | ingressSipRegFailLimit | ingressSipRegPolicing | intervalValid | time
*  The counter (or number) is associated with a performance measurement in a previous 15-minute measurement interval. In the case where the agent has no valid data available for a particular interval, the corresponding object instance is not available; and upon a retrieval request a corresponding error message is returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation).
In a system supporting a history of ‘n’ intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15-minute interval: 
  • discard the value of IntervalCount(n)
  • the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1
  • the value of IntervalCount(1) becomes that of CurrentCount
  • the TotalCount, if supported, is adjusted.
zoneStatus
 Code Block
> show status addressContext <addressContext_name> zoneStatus <zone name>
activeSipRegCount | bwAvailable | bwCurrentLimit | bwInboundUsage | bwOutboundUsage | emergencyCallsBwUsage | inboundCallsUsage | outboundCallsUsage | priorityCallUsage | totalCallsAvailable | totalCallsConfigured 
Command Parameters
The parameters associated with the 'show status addressContext' command are listed in the table below.
 Note
The following objects are included in this table for completeness, but only apply when using the 
 Link_in_new_tab
Textshow table addressContext
URLshow table addressContext
 command:
natDirectMediaGroup, rtpServerTable, surrRegCountStatistics
 Multiexcerpt include
MultiExcerptNameshowTableAddressContextParams
nopaneltrue
PageWithExcerptShow Table Address Context
IPSEC Parameters
 Note
The following objects only apply when using the 
 Link_in_new_tab
Textshow table addressContext
URLshow table addressContext
 command:
peer, spd
 Multiexcerpt include
MultiExcerptNameshowTableAddressContextIpsecParams
nopaneltrue
PageWithExcerptShow Table Address Context
Zone Parameters
 Note
The following objects only apply when using the 
 Link_in_new_tab
Textshow table addressContext
URLshow table addressContext
 command:
dialogTransparency, disableZoneLevelLoopDetection, dnsGroup, domainName, flexiblePolicyAdapterProfile, gwSigPort, gwTrunkGroup, h323SigPort, h323TrunkGroup, id, ipPeer, messageManipulation, mtrmConnPort, remoteDeviceType, sipSigPort, sipTrunkGroup
 Multiexcerpt include
MultiExcerptNameshowTableAddressContextZoneParams
nopaneltrue
PageWithExcerptShow Table Address Context
Command Examples
General Examples
To show zone current statistics:
surrRegCountStatistics entry
	surrRegActiveRegCount
	surrRegConfiguredCount
 Multiexcerpt include
MultiExcerptNameSurrogateRegistrationCountStatistics
PageWithExcerptShow Table Address Context
Zone
Go to 
 Link_in_new_tab
TextShow Status Address Context - Zone
URLShow Status Address Context - Zone
 for the following Zone status/statics details.
  • Zone
  • Zone Current Statistics
  • Zone Interval Statistics
  • Zone Status
Command Examples
General Examples
 
To display the link Detection Group Status:
 Code Block
languagenone
> show status addressContext default linkDetectionGroup
	 MGMT_LDG2 linkMonitorStatus MGMT_LM2 
{
monitorStatus monitoring; 
linkStatus up; 
}
linkMonitorStatus MGMT_LM4 
{
monitorStatus portDown; 
linkStatus portDown; 
}
linkMonitorStatistics MGMT_LM2 
{
minTime 336; 
maxTime 740; 
averageTime 375; 
singleFailures 0; 
doubleFailures 0; 
failures 0; 
replies 13; 
duplicateReplies 0; 
lateReplies 0; 
}
linkMonitorStatistics MGMT_LM4 
{
minTime 0; 
maxTime 0;
averageTime 0; 
singleFailures 0; 
doubleFailures 0; 
failures 1; 
replies 0; 
duplicateReplies 0; 
lateReplies 0; 
}
 
To view default ACL statistics details:
 
 Code Block
> show status addressContext default ipAccessControlList defaultAclStatistics
defaultAclStatistics 9 {
    protocol             UDP;
    application          dns_udp_guest;
    addressContextId     *;
    lifGrpId             *;
    sourceIpAddress      "* (53)";
    destinationIpAddress "* (0)";
    policingMode         PktRate;
    bucketSize           "50 pkt";
    creditRate           "1000 pkt/s";
    polId                0;
    polPriority          0;
    packetAccept         0;
    packetDiscard        0;
    aggPol               none;
    owner                vm;
    vmGuestId            Vm1;
}
 
Examples Showing Audio and Video Usage
Audio-Only CLI Output
 Code Block
languagenone
admin@SBC01> show status addressContext default ipInterfaceGroup IG1                  
ipInterfaceStatus IF1 {
    ifindex            13;
    operState          resAllocated;
    oosReason          notApplicable;
    rxPackets          6488;
    txPackets          140;
    allocatedBandwidth 15800;
    actualBandwidth    0;
    bwDeviation        0;
    numMediaStreams    1;
}
[ok][2014-07-17 16:47:26]

admin@SBC01> show status addressContext default ipInterfaceGroup IG2
ipInterfaceStatus IF2 {
    ifindex            14;
    operState          resAllocated;
    oosReason          notApplicable;
    rxPackets          270;
    txPackets          2626;
    allocatedBandwidth 15800;
    actualBandwidth    0;
    bwDeviation        0;
    numMediaStreams    1;
}
[ok][2014-07-17 16:47:28]

admin@SBC01> show status addressContext default zone ZONE_IN_PCR1377 trunkGroupStatus 
trunkGroupStatus TG_IN_PCR1377 {
    state                      inService;
    totalCallsAvailable        -1;
    totalCallsInboundReserved  0;
    inboundCallsUsage          1;
    outboundCallsUsage         0;
    totalCallsConfigured       -1;
    priorityCallUsage          0;
    totalOutboundCallsReserved 0;
    bwCurrentLimit             -1;
    bwAvailable                -1;
    bwInboundUsage             124;
    bwOutboundUsage         
 Code Block
languagenone
admin@SBX15> show status addressContext default zoneCurrentStatistics
zoneCurrentStatistics defaultSigZone {
    ingressFailCallLimit    0;
    egressFailCallLimit     0;
    ingressFailCallPolicing 0;
    egressFailCallPolicing  0;
    ingressFailBWLimit      0;
    egressFailBWLimit       0;
    ingressSipRegFailLimit  0;
    egressSipRegFailLimit   0;
    ingressSipRegPolicing   0;
    egressSipRegPolicingpacketOutDetectState       0normal;
}
 
To display the link Detection Group Status:
 Code Block
languagenone
>

[ok][2014-07-17 16:47:36]

admin@SBC01> show status addressContext default 
linkDetectionGroup
	 MGMT_LDG2 linkMonitorStatus MGMT_LM2 
{
monitorStatus monitoring; 
linkStatus up; 
}
linkMonitorStatus MGMT_LM4 
{
monitorStatus portDown; 
linkStatus portDown; 
}
linkMonitorStatistics MGMT_LM2 
{
minTime 336; 
maxTime 740; 
averageTime 375; 
singleFailures 0; 
doubleFailures 0; 
failures 0; 
replies 13; 
duplicateReplies 0; 
lateReplies 0; 
}
linkMonitorStatistics MGMT_LM4 
{
minTime 0; 
maxTime 0;
averageTime 0; 
singleFailures 0; 
doubleFailures 0; 
failures 1; 
replies 0; 
duplicateReplies 0; 
lateReplies 0; 
}
To view default ACL statistics details:
 
 Code Block> show status addressContext default ipAccessControlList defaultAclStatistics
defaultAclStatistics 9 {
    protocol
zone ZONE_OUT_PCR1377 trunkGroupStatus
trunkGroupStatus TG_OUT_PCR1377 {
    state                      inService;
    totalCallsAvailable        -1;
    totalCallsInboundReserved  0;
    inboundCallsUsage          0;
    outboundCallsUsage         1;
    totalCallsConfigured       -1;
    priorityCallUsage  
UDP;

    
application
    0;
    
  dns_udp_guest
totalOutboundCallsReserved 0;
    
addressContextId
bwCurrentLimit      
*;

    
lifGrpId
   -1;
    bwAvailable     
 *;

    
sourceIpAddress
      
"* (53)"
 -1;
    
destinationIpAddress "* (0)";

bwInboundUsage    
policingMode
         
PktRate
0;
    
bucketSize
bwOutboundUsage           
"50
 
pkt"
124;
    
creditRate
packetOutDetectState       normal;
} 
 
Video-Only CLI Output
 Code Block
languagenone
admin@SBC01> show status addressContext 
"1000 pkt/s";
    polId
default ipInterfaceGroup IG2
ipInterfaceStatus IF2 {
    ifindex            
0
14;
    
polPriority
operState          
0
resAllocated;
    oosReason 
packetAccept
         
0
notApplicable;
    rxPackets  
packetDiscard
        
0
236;
    
aggPol
txPackets          1318;
    allocatedBandwidth 
none
128000;
    
owner
actualBandwidth    21008;
    bwDeviation        
vm
0;
    
vmGuestId
numMediaStreams    
        Vm1;
}
 
Examples Showing Audio and Video Usage
Audio-Only CLI Output
 Code Block
languagenone
1;
}
[ok][2014-07-17 16:33:21]

admin@SBC01> show status addressContext default ipInterfaceGroup IG1                  
ipInterfaceStatus IF1 {
    ifindex            13;
    operState          resAllocated;
    oosReason          notApplicable;
    rxPackets          64885343;
    txPackets          140126;
    allocatedBandwidth 15800128000;
    actualBandwidth    023648;
    bwDeviation        0;
    numMediaStreams    1;
}
[ok][2014-07-17 16:4733:2625]

admin@SBC01> show status addressContext default ipInterfaceGroup IG2
ipInterfaceStatus IF2zone ZONE_IN_PCR1377 trunkGroupStatus
trunkGroupStatus TG_IN_PCR1377 {
     ifindexstate                      14inService;
    operStatetotalCallsAvailable        -1;
    totalCallsInboundReserved  resAllocated0;
    oosReasoninboundCallsUsage          notApplicable1;
    rxPacketsoutboundCallsUsage          2700;
    txPacketstotalCallsConfigured          2626-1;
    priorityCallUsage allocatedBandwidth 15800;
    actualBandwidth    0;
    totalOutboundCallsReserved 0;
 bwDeviation   bwCurrentLimit     0;
    numMediaStreams    -1;
}
[ok][2014-07-17 16:47:28]

admin@SBC01> show status addressContextbwAvailable default zone ZONE_IN_PCR1377 trunkGroupStatus 
trunkGroupStatus TG_IN_PCR1377 {
        state     -1;
    bwInboundUsage             inService1000;
    bwOutboundUsage  totalCallsAvailable          -10;
    totalCallsInboundReservedpacketOutDetectState  0;
    inboundCallsUsage normal;
}

admin@SBC01> show status addressContext default zone ZONE_OUT_PCR1377 trunkGroupStatus
trunkGroupStatus  1;TG_OUT_PCR1377 {
    outboundCallsUsagestate           0;
    totalCallsConfigured       -1inService;
    priorityCallUsagetotalCallsAvailable          0-1;
    totalOutboundCallsReservedtotalCallsInboundReserved  0;
    inboundCallsUsage bwCurrentLimit         0;
    -1;
outboundCallsUsage    bwAvailable     1;
    totalCallsConfigured       -1;
    bwInboundUsagepriorityCallUsage             1240;
    bwOutboundUsagetotalOutboundCallsReserved 0;
      bwCurrentLimit     0;
    packetOutDetectState       normal-1;
}
[ok][2014-07-17 16:47:36]

admin@SBC01> show status addressContextbwAvailable default zone ZONE_OUT_PCR1377 trunkGroupStatus
trunkGroupStatus TG_OUT_PCR1377 {
       state     -1;
    bwInboundUsage             inService0;
    totalCallsAvailablebwOutboundUsage        -1;
    totalCallsInboundReserved  01000;
    inboundCallsUsagepacketOutDetectState       normal;
} 
 
Both Audio and Video CLI Output
 Code Block
languagenone
admin@SBC01> show  0;
  status addressContext default ipInterfaceGroup IG1  outboundCallsUsage         1;
    totalCallsConfigured   
ipInterfaceStatus IF1 {
  -1;
  ifindex  priorityCallUsage          013;
    totalOutboundCallsReservedoperState 0;
    bwCurrentLimit     resAllocated;
    oosReason    -1;
    bwAvailable  notApplicable;
    rxPackets          -16502;
    txPackets  bwInboundUsage        154;
    allocatedBandwidth 0143800;
    bwOutboundUsageactualBandwidth    0;
    bwDeviation     124;
   0;
 packetOutDetectState   numMediaStreams    normal2;
} 
 
Video-Only CLI Output
 Code Block
languagenone

[ok][2014-07-17 16:55:12]

admin@SBC01> show status addressContext default ipInterfaceGroup IG2
ipInterfaceStatus IF2 {
    ifindex            14;
    operState          resAllocated;
    oosReason          notApplicable;
    rxPackets          236281;
    txPackets          13182635;
    allocatedBandwidth 128000143800;
    actualBandwidth    210080;
    bwDeviation        0;
    numMediaStreams    12;
}
[ok][2014-07-17 16:3355:2119]

admin@SBC01> show status addressContext default ipInterfaceGroup IG1
ipInterfaceStatus IF1 zone ZONE_IN_PCR1377 trunkGroupStatus 
trunkGroupStatus TG_IN_PCR1377 {
    ifindexstate            13;
    operState      inService;
    resAllocated;
totalCallsAvailable    oosReason    -1;
    totalCallsInboundReserved  notApplicable0;
    rxPacketsinboundCallsUsage          53431;
    txPacketsoutboundCallsUsage          1260;
    totalCallsConfigured    allocatedBandwidth   128000-1;
    priorityCallUsage      actualBandwidth    236480;
    totalOutboundCallsReserved 0;
 bwDeviation   bwCurrentLimit     0;
    numMediaStreams    -1;
}
[ok][2014-07-17 16:33:25]

admin@SBC01> show status addressContext default zone ZONE_IN_PCR1377 trunkGroupStatus
trunkGroupStatus TG_IN_PCR1377 {
    bwAvailable           state     -1;
    bwInboundUsage             inService1124;
    totalCallsAvailablebwOutboundUsage        -1;
    totalCallsInboundReserved  0;
    inboundCallsUsage   packetOutDetectState       1normal;
}
[ok][2014-07-17 16:55:31]

admin@SBC01> show status outboundCallsUsageaddressContext default zone ZONE_OUT_PCR1377 trunkGroupStatus
trunkGroupStatus TG_OUT_PCR1377 {
    0;
state    totalCallsConfigured       -1;
    priorityCallUsage       inService;
   0;
 totalCallsAvailable   totalOutboundCallsReserved 0;
    bwCurrentLimit-1;
    totalCallsInboundReserved  0;
    inboundCallsUsage   -1;
    bwAvailable   0;
    outboundCallsUsage         -1;
    totalCallsConfigured   bwInboundUsage    -1;
    priorityCallUsage     1000;
    bwOutboundUsage 0;
    totalOutboundCallsReserved 0;
    bwCurrentLimit  0;
    packetOutDetectState       normal-1;
}

admin@SBC01> show status addressContext default zone ZONE_OUT_PCR1377 trunkGroupStatus
trunkGroupStatus TG_OUT_PCR1377 {
    bwAvailable           state     -1;
    bwInboundUsage             inService0;
    totalCallsAvailablebwOutboundUsage        -1;
    totalCallsInboundReserved  01124;
    packetOutDetectState   inboundCallsUsage    normal;
} 
 Code Block
languagenone
> show addressContext default sipActiveRegisterNameStatus
sipActiveRegisterNameStatus Sonus@10.54.8.191 268 0;{
    outboundCallsUsagestate         1;
    totalCallsConfigured       -1completed;
    priorityCallUsagecontactURI          0;
    totalOutboundCallsReserved 0 sip:Sonus@10.70.52.91:5070;
    bwCurrentLimitnextHopIpAddress         10.70.52.91;
    nextHopPortNum    -1;
    bwAvailable   5070;
    registrarIpAddress         -110.128.254.86;
    bwInboundUsageregistrarPortNum         5090;
    0;
externalExpirationTime   3598;
 bwOutboundUsage   internalExpirationTime   3600;
    creationTime  1000;
    packetOutDetectState       normal;
} 
 
Both Audio and Video CLI Output
 Code Block
languagenone
admin@SBC01> show status addressContext default ipInterfaceGroup IG1  2014-06-27T09:35:54+00:00;
    registrarDomainName      "";
    endPointBehindNapt       0;
    natPinholeLearningStatus 
ipInterfaceStatus IF1 {
none;
    securityMechanismType    none;
    isRoaming    ifindex            131;
}
 
To view SIP Peer CAC Status details:
 Code Block
show status addressContext  operState   addr_1 zone ZONE_IAD sipPeerCacStatus
sipPeerCacStatus "" 10.54.80.151 0 nonRegistrantSipPeer {
    createdAt   resAllocated;
    oosReason          notApplicable;
    rxPackets          65022017-05-15T12:08:16+00:00;
    txPacketsingressCallsAllowed          154;
    allocatedBandwidth 143800;
    actualBandwidth    019;
    bwDeviation  ingressCallsActive      0;
    numMediaStreams    2;
}
[ok][2014-07-17 16:55:12]

admin@SBC01> show status addressContext default ipInterfaceGroup IG2
ipInterfaceStatus IF2 {
    ifindex         1;
    ingressCallRejectsLimit               1428;
    ingressCallRejectsRate      operState          resAllocated0;
    egressCallsAllowed  oosReason          notApplicable;
    rxPackets    0;
    egressCallsActive  281;
    txPackets          2635;
    allocatedBandwidth 1438000;
    actualBandwidthegressCallRejectsLimit    0;
    bwDeviation        0;
    numMediaStreamsegressCallRejectsRate      2;
}
[ok][2014-07-17 16:55:19]

admin@SBC01> show status addressContext default zone ZONE_IN_PCR1377 trunkGroupStatus 
trunkGroupStatus TG_IN_PCR1377 { 0;
    state                            inService     enabled;
    ingressDblAggregateMessagesAllowed totalCallsAvailable   0;
    ingressDblAggregateMessageRejectsRate -10;
    egressDblAggregateMessagesAllowed   totalCallsInboundReserved  0;
    inboundCallsUsageegressDblAggregateMessageRejectsRate  0;
     ingressMessagesAllowed   1;
    outboundCallsUsage         0;
    totalCallsConfiguredingressMessageRejectsRate             -10;
    priorityCallUsageegressMessagesAllowed            0;
    totalOutboundCallsReserved 0;
    egressMessageRejectsRate bwCurrentLimit             -10;
    ingressNotifysAllowed bwAvailable                -10;
    bwInboundUsageingressNotifyRejectsRate              11240;
    egressNotifysAllowed    bwOutboundUsage              0;
    egressNotifyRejectsRate  packetOutDetectState             normal0;
}
[ok][2014-07-17 16:55:31]

admin@SBC01> show status addressContext default zone ZONE_OUT_PCR1377 trunkGroupStatus
trunkGroupStatus TG_OUT_PCR1377 {
    ingressOptionsAllowed            state     0;
    ingressOptionsRejectsRate             inService0;
    egressOptionsAllowed    totalCallsAvailable        -1;
    totalCallsInboundReserved  0;
    egressOptionsRejectsRate   inboundCallsUsage           0;
    ingressOtherRequestsAllowed  outboundCallsUsage         159;
    totalCallsConfiguredingressOtherRequestsRejectsRate       -10;
    egressOtherRequestsAllowed priorityCallUsage           0;
    totalOutboundCallsReservedegressOtherRequestsRejectsRate 0;
    bwCurrentLimit   0;
    ingressRefersAllowed      -1;
    bwAvailable        0;
    ingressReferRejectsRate    -1;
    bwInboundUsage       0;
    egressRefersAllowed  0;
     bwOutboundUsage            11240;
    egressReferRejectsRate packetOutDetectState        normal;
} 
 Code Block
languagenone
> show addressContext default sipActiveRegisterNameStatus
sipActiveRegisterNameStatus Sonus@10.54.8.191 268 {0;
    stateingressResponsesAllowed               0;
    ingressResponseRejectsRate completed;
    contactURI       0;
    egressResponsesAllowed    sip:Sonus@10.70.52.91:5070;
    nextHopIpAddress         10.70.52.910;
    egressResponseRejectsRate  nextHopPortNum           50700;
    ingressSubscribesAllowed  registrarIpAddress       10.128.254.86;
    registrarPortNum 0;
    ingressSubscribeRejectsRate    5090;
    externalExpirationTime   35980;
    internalExpirationTimeegressSubscribesAllowed    3600;
    creationTime       0;
    egressSubscribeRejectsRate  2014-06-27T09:35:54+00:00;
    registrarDomainName      ""0;
    endPointBehindNaptbandwidthRejectsLimit       0;
    natPinholeLearningStatus none;
    securityMechanismType 0;
   none;
 videoThresholdLimit   isRoaming                10;
}
 
 Pagebreak