Page History

Noprint

Panel

borderColor	green
bgColor	transparent
borderWidth	2

Back to Table of Contents

Back to CLI System-Level Mode

Back to show Command Details - CLI

Back to Show Status Command Details - CLI

Panel

In this section:

Table of Contents

maxLevel	3

Include Page

	Call_Stats_Terms
	Call_Stats_Terms

Excerpt Include

	Resource Monitoring and Statistics
	Resource Monitoring and Statistics
nopanel	true

Include Page

	IntervalStatsMustMatchEMS
	IntervalStatsMustMatchEMS

Include Page

	Stats_results_limited_in_AC
	Stats_results_limited_in_AC

Command Syntax

Table of Contents

maxLevel	4
minLevel	4
type	flat

The command syntax of the objects related to the show status addressContext command is shown below.

Code Block

language	none

> show status addressContext <addressContext name>
	cacOffenderStatus
	dnsGroup
	dynamicBlackList
	ipAccessControlList
	ipInterfaceGroup
	ipRouteStatus
	ipsec
	linkDetectionGroup
	linkDetectionGroupStatistics
	linkDetectionGroupStatus
	logicalSigAddressBindingStatus 
	sipActiveGroupRegStatus
	sipActiveGroupRegSummaryStatus
	sipActiveRegisterNameStatus
	sipDeletedRegStatus
	sipDeletedRegisterNameStatus
	sipRegCountStatistics
	sipSubCountStatistics
	sipSubscriptionStatus
	surrRegCountStatistics
	zone
	zoneCurrentStatistics
	zoneIntervalStatistics
	zoneStatus

Command syntax for the above objects is defined in greater detail below.

cacOffenderStatus

Code Block

> show status addressContext <addressContext_name> cacOffenderStatus
	<index number>
	egressCallRejects
	egressMessageRejects 
	egressNotifyRejects
	egressOptionsRejects 
	egressOtherRequestRejects
	egressReferRejects 
	egressSubscribeRejects 
	firstRejectAt
	ingressCallRejects 
	ingressMessageRejects
	ingressNotifyRejects 
	ingressOptionsRejects
	ingressOtherRequestRejects 
	ingressReferRejects
	ingressSubscribeRejects
	ipAddress
	lastRejectAt 
	messageFirstRejectAt 
	messageLastRejectAt
	notifyFirstRejectAt
	notifyLastRejectAt 
	optionsFirstRejectAt 
	optionsLastRejectAt
	otherFirstRejectAt 
	otherLastRejectAt
	referFirstRejectAt 
	referLastRejectAt
	subscribeFirstRejectAt 
	subscribeLastRejectAt
	zoneId

dnsGroup

Code Block

language	none

> show status addressContext <addressContext_name> dnsGroup 
	<dnsGroup name>
		dnsEntryDataStatus
		dnsEntryStatus
		dnsServerStatistics

dynamicBlacklist

Code Block

language	none

> show status addressContext <addressContext_name> dynamicBlackList
	dblPolicerStatus
	cumulativeEnforcements
	policerEnforcements
	dblStatus
	currentAction <blacklist | watch>
	discardPacketCount
	effectivePeriodRemaining
	trunkGroup

intercept

Code Block

language	none

>  show status addressContext <addressContext_name> intercept
	callDataChannel 
	interceptCallDataChannelStatistics

ipAccessControlList

Code Block

language	none

> show status addressContext <addressContext_name> ipAccessControlList 
	defaultAclStatistics
	getAggrPolicers 
	ipAclOverallStatistics
	ipAclRuleStatistics
	ipAclRulesByPrecedence
	rule

ipInterfaceGroup

Code Block

language	none

> show status addressContext <addressContext_name> ipInterfaceGroup <IG name> 
	ipInterfaceStatus
		<IP Interface name>
		actualBandwidth
		allocatedBandwidth
		bwDeviation
		ifindex
		numMediaStreams
		oosReason
		operState
		rxPackets
		txPackets

ipRouteStatus

Code Block

language	none

> show status addressContext <addressContext_name> ipRouteStatus <system name> <ip address> <prefix> 
	protocol <bbnSpfIgp | bgp | ciscoEigrp | ciscoIgrp | egp | esIs | ggp | hello | icmp | idpr | isIs | local | netmgmt | ospf | other | rip>

ipsec

Code Block

language	none

>  show status addressContext <addressContext_name> ipsec 
	ikeSaStatistics
	ikeSaStatus
	ipsecSaStatistics
	ipsecSaStatus
	systemStatistics

linkDetectionGroup

Code Block

language	none

> show status addressContext <addressContext_name> linkDetectionGroup
	linkDetectionGroup
	linkDetectionGroupStatistics
	linkDetectionGroupStatus

linkDetectionGroupStatistics

Code Block

language	none

> show status addressContext <addressContext_name> linkDetectionGroupStatistics <Link Detection Group name> 
	doubleFailures
	failures
	singleFailures

linkDetectionGroupStatus

Code Block

language	none

> show status addressContext <addressContext_name> linkDetectionGroupStatus <Link Detection Group name> failures

logicalSigAddressBindingStatus

Code Block

language	none

> show status addressContext <addressContext_name> logicalSigAddressBindingStatus <ip interface>

sipActiveGroupRegStatus

Code Block

language	none

> show status addressContext <addressContext_name> sipActiveGroupRegStatus <id>
aorName | contactURI | creationTime | extExpirationTime | intExpirationTime | nextHopIpAddress | nextHopPortNum | regIdIsChild | registrarDomainName | registrarIpAddress | registrarPortNum | state

sipActiveGroupRegSummaryStatus

Code Block

language	none

> show status addressContext <addressContext_name> sipActiveGroupRegSummaryStatus <registrar ip address>
	aorName
	nextRegIdIsChild
	state

sipActiveRegisterNameStatus

Code Block

language	none

> show status addressContext <addressContext_name> sipActiveRegisterNameStatus <aor name>
contactURI | creationTime | e2aeMediaSecurity | endPointBehindNapt | externalExpirationTime | internalExpirationTime | isRoaming | natPinholeLearningStatus |  nextHopIpAddress | nextHopPortNum | registrarDomainName | registrarIpAddress | registrarPortNum | securityMechanismType | state

sipDeletedRegStatus

Code Block

language	none

> show status addressContext <addressContext_name> sipDeletedRegStatus <id>
aorName | contactURI | creationTime | nextHopIpAddress | nextHopPortNum | reasonCode | registrarDomainName | registrarIpAddress | registrarPortNum | terminationTime

sipDeletedRegisterNameStatus

Code Block

language	none

> show status addressContext <addressContext_name> sipDeletedRegisterNameStatus <aor name>
	contactURI | creationTime | nextHopIpAddress | nextHopPortNum | reasonCode | registrarDomainName | registrarIpAddress | registrarPortNum | terminationTime

sipRegCountStatistics

Code Block

language	none

> show status addressContext <addressContext_name> sipRegCountStatistics entry
	sipEmergencyRegAcceptTotal
	sipEmergencyRegActiveTotal
	sipRegCountAttempts
	sipRegCountCumCompletions
	sipRegCountPending
	sipRegCountStable
	sipRegCountTotal

sipSubCountStatistics

Code Block

language	none

> show status addressContext <addressContext_name> sipSubCountStatistics entry 
	sipSubCountAttempts
	sipSubCountCumCompletions
	sipSubCountPending
	sipSubCountStable
	sipSubCountTotal

sipSubscriptionStatus

Code Block

language	none

> show status addressContext <addressContext_name> sipSubscriptionStatus <id>
callId | expirationTime | nextHopIpAddress | nextHopPortNum | origEPDomain | previousHopIpAddress | previousHopPortNum | serverDomainName | state

surrRegCountStatistics

Code Block

language	none

> show status addressContext <addressContext_name> surrRegCountStatistics entry
	surrRegActiveRegCount
	surrRegConfiguredCount

zone

Code Block

language	none

> show status addressContext <addressContext_name> zone <zone name>
	callCurrentStatistics
	callFailureCurrentStatistics 
	callFailureIntervalStatistics
	callIntervalStatistics
	filterSipSrc
	filterSipSrcStatistics
	gwSigPortStatistics
	gwSigPortStatus
	h323SigPortStatistics
	h323SigPortStatus
	peerPathchkStatus
	peerQosStatus
	peerSurrRegStatus
	sipArsStatus
	sipCurrentStatistics
	sipIntervalStatistics
	sipOcsCallCurrentStatistics
	sipOcsCallIntervalStatistics
	sipPeerCacStatus
	sipRegAdaptiveNaptLearningStatistics
	sipSigConnStatistics
	sipSigConnStatus 
	sipSigPortStatistics 
	sipSigPortStatus 
	sipSigPortTlsStatistics
	sipSigTlsSessionStatus
	sonusSipSigPeerOvldStatusEntry
	trafficControlCurrentStatistics
	trafficControlIntervalStatistics
	trunkGroupQoeStatus
	trunkGroupStatus

zoneCurrentStatistics

Code Block

language	none

> show status addressContext <addressContext_name> zoneCurrentStatistics <zone name>
egressFailBWLimit | egressFailCallLimit | egressFailCallPolicing | egressSipRegFailLimit | egressSipRegPolicing | ingressFailBWLimit | ingressFailCallLimit | ingressFailCallPolicing | ingressSipRegFailLimit | ingressSipRegPolicing

zoneIntervalStatistics

Code Block

> show status addressContext <addressContext_name> zoneIntervalStatistics <counter*>
egressFailBWLimit | egressFailCallLimit | egressFailCallPolicing | egressSipRegFailLimit | egressSipRegPolicing | ingressFailBWLimit | ingressFailCallLimit | ingressFailCallPolicing | ingressSipRegFailLimit | ingressSipRegPolicing | intervalValid | time

* The counter (or number) is associated with a performance measurement in a previous 15-minute measurement interval. In the case where the agent has no valid data available for a particular interval, the corresponding object instance is not available; and upon a retrieval request a corresponding error message is returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation).

In a system supporting a history of ‘n’ intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15-minute interval:

discard the value of IntervalCount(n)
the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1
the value of IntervalCount(1) becomes that of CurrentCount
the TotalCount, if supported, is adjusted.

zoneStatus

Code Block

> show status addressContext <addressContext_name> zoneStatus <zone name>
activeSipRegCount | bwAvailable | bwCurrentLimit | bwInboundUsage | bwOutboundUsage | emergencyCallsBwUsage | inboundCallsUsage | outboundCallsUsage | priorityCallUsage | totalCallsAvailable | totalCallsConfigured

Command Parameters

The parameters associated with the 'show status addressContext' command are listed in the table below.

Note

The following objects are included in this table for completeness, but only apply when using the

Link_in_new_tab

Text	show table addressContext
URL	show table addressContext

command:

natDirectMediaGroup, rtpServerTable, surrRegCountStatistics

Multiexcerpt include

MultiExcerptName	showTableAddressContextParams
nopanel	true
PageWithExcerpt	Show Table Address Context

IPSEC Parameters

Note

The following objects only apply when using the

Link_in_new_tab

Text	show table addressContext
URL	show table addressContext

command:

peer, spd

Multiexcerpt include

MultiExcerptName	showTableAddressContextIpsecParams
nopanel	true
PageWithExcerpt	Show Table Address Context

Zone Parameters

Note

The following objects only apply when using the

Link_in_new_tab

Text	show table addressContext
URL	show table addressContext

command:

dialogTransparency, disableZoneLevelLoopDetection, dnsGroup, domainName, flexiblePolicyAdapterProfile, gwSigPort, gwTrunkGroup, h323SigPort, h323TrunkGroup, id, ipPeer, messageManipulation, mtrmConnPort, remoteDeviceType, sipSigPort, sipTrunkGroup

Multiexcerpt include

MultiExcerptName	showTableAddressContextZoneParams
nopanel	true
PageWithExcerpt	Show Table Address Context

Command Examples

General Examples

To show zone current statistics:

Code Block

language	none

admin@SBX15> show status addressContext default zoneCurrentStatistics
zoneCurrentStatistics defaultSigZone {
    ingressFailCallLimit    0;
    egressFailCallLimit     0;
    ingressFailCallPolicing 0;
    egressFailCallPolicing  0;
    ingressFailBWLimit      0;
    egressFailBWLimit       0;
    ingressSipRegFailLimit  0;
    egressSipRegFailLimit   0;
    ingressSipRegPolicing   0;
    egressSipRegPolicing    0;
}

To display the link Detection Group Status:

Code Block

language	none

> show status addressContext default linkDetectionGroup
	 MGMT_LDG2 linkMonitorStatus MGMT_LM2 
{
monitorStatus monitoring; 
linkStatus up; 
}
linkMonitorStatus MGMT_LM4 
{
monitorStatus portDown; 
linkStatus portDown; 
}
linkMonitorStatistics MGMT_LM2 
{
minTime 336; 
maxTime 740; 
averageTime 375; 
singleFailures 0; 
doubleFailures 0; 
failures 0; 
replies 13; 
duplicateReplies 0; 
lateReplies 0; 
}
linkMonitorStatistics MGMT_LM4 
{
minTime 0; 
maxTime 0;
averageTime 0; 
singleFailures 0; 
doubleFailures 0; 
failures 1; 
replies 0; 
duplicateReplies 0; 
lateReplies 0; 
}

To view default ACL statistics details:

Code Block

> show status addressContext default ipAccessControlList defaultAclStatistics
defaultAclStatistics 9 {
    protocol             UDP;
    application          dns_udp_guest;
    addressContextId     *;
    lifGrpId             *;
    sourceIpAddress      "* (53)";
    destinationIpAddress "* (0)";
    policingMode         PktRate;
    bucketSize           "50 pkt";
    creditRate           "1000 pkt/s";
    polId                0;
    polPriority          0;
    packetAccept         0;
    packetDiscard        0;
    aggPol               none;
    owner                vm;
    vmGuestId            Vm1;
}

Examples Showing Audio and Video Usage

Audio-Only CLI Output

Code Block

language	none

admin@SBC01> show status addressContext default ipInterfaceGroup IG1                  
ipInterfaceStatus IF1 {
    ifindex            13;
    operState          resAllocated;
    oosReason          notApplicable;
    rxPackets          6488;
    txPackets          140;
    allocatedBandwidth 15800;
    actualBandwidth    0;
    bwDeviation        0;
    numMediaStreams    1;
}
[ok][2014-07-17 16:47:26]

admin@SBC01> show status addressContext default ipInterfaceGroup IG2
ipInterfaceStatus IF2 {
    ifindex            14;
    operState          resAllocated;
    oosReason          notApplicable;
    rxPackets          270;
    txPackets          2626;
    allocatedBandwidth 15800;
    actualBandwidth    0;
    bwDeviation        0;
    numMediaStreams    1;
}
[ok][2014-07-17 16:47:28]

admin@SBC01> show status addressContext default zone ZONE_IN_PCR1377 trunkGroupStatus 
trunkGroupStatus TG_IN_PCR1377 {
    state                      inService;
    totalCallsAvailable        -1;
    totalCallsInboundReserved  0;
    inboundCallsUsage          1;
    outboundCallsUsage         0;
    totalCallsConfigured       -1;
    priorityCallUsage          0;
    totalOutboundCallsReserved 0;
    bwCurrentLimit             -1;
    bwAvailable                -1;
    bwInboundUsage             124;
    bwOutboundUsage            0;
    packetOutDetectState       normal;
}
[ok][2014-07-17 16:47:36]

admin@SBC01> show status addressContext default zone ZONE_OUT_PCR1377 trunkGroupStatus
trunkGroupStatus TG_OUT_PCR1377 {
    state                      inService;
    totalCallsAvailable        -1;
    totalCallsInboundReserved  0;
    inboundCallsUsage          0;
    outboundCallsUsage         1;
    totalCallsConfigured       -1;
    priorityCallUsage          0;
    totalOutboundCallsReserved 0;
    bwCurrentLimit             -1;
    bwAvailable                -1;
    bwInboundUsage             0;
    bwOutboundUsage            124;
    packetOutDetectState       normal;
}

Video-Only CLI Output

Code Block

language	none

admin@SBC01> show status addressContext default ipInterfaceGroup IG2
ipInterfaceStatus IF2 {
    ifindex            14;
    operState          resAllocated;
    oosReason          notApplicable;
    rxPackets          236;
    txPackets          1318;
    allocatedBandwidth 128000;
    actualBandwidth    21008;
    bwDeviation        0;
    numMediaStreams    1;
}
[ok][2014-07-17 16:33:21]

admin@SBC01> show status addressContext default ipInterfaceGroup IG1
ipInterfaceStatus IF1 {
    ifindex            13;
    operState          resAllocated;
    oosReason          notApplicable;
    rxPackets          5343;
    txPackets          126;
    allocatedBandwidth 128000;
    actualBandwidth    23648;
    bwDeviation        0;
    numMediaStreams    1;
}
[ok][2014-07-17 16:33:25]

admin@SBC01> show status addressContext default zone ZONE_IN_PCR1377 trunkGroupStatus
trunkGroupStatus TG_IN_PCR1377 {
    state                      inService;
    totalCallsAvailable        -1;
    totalCallsInboundReserved  0;
    inboundCallsUsage          1;
    outboundCallsUsage         0;
    totalCallsConfigured       -1;
    priorityCallUsage          0;
    totalOutboundCallsReserved 0;
    bwCurrentLimit             -1;
    bwAvailable                -1;
    bwInboundUsage             1000;
    bwOutboundUsage            0;
    packetOutDetectState       normal;
}

admin@SBC01> show status addressContext default zone ZONE_OUT_PCR1377 trunkGroupStatus
trunkGroupStatus TG_OUT_PCR1377 {
    state                      inService;
    totalCallsAvailable        -1;
    totalCallsInboundReserved  0;
    inboundCallsUsage          0;
    outboundCallsUsage         1;
    totalCallsConfigured       -1;
    priorityCallUsage          0;
    totalOutboundCallsReserved 0;
    bwCurrentLimit             -1;
    bwAvailable                -1;
    bwInboundUsage             0;
    bwOutboundUsage            1000;
    packetOutDetectState       normal;
}

Both Audio and Video CLI Output

Code Block

language	none

admin@SBC01> show status addressContext default ipInterfaceGroup IG1                  
ipInterfaceStatus IF1 {
    ifindex            13;
    operState          resAllocated;
    oosReason          notApplicable;
    rxPackets          6502;
    txPackets          154;
    allocatedBandwidth 143800;
    actualBandwidth    0;
    bwDeviation        0;
    numMediaStreams    2;
}
[ok][2014-07-17 16:55:12]

admin@SBC01> show status addressContext default ipInterfaceGroup IG2
ipInterfaceStatus IF2 {
    ifindex            14;
    operState          resAllocated;
    oosReason          notApplicable;
    rxPackets          281;
    txPackets          2635;
    allocatedBandwidth 143800;
    actualBandwidth    0;
    bwDeviation        0;
    numMediaStreams    2;
}
[ok][2014-07-17 16:55:19]

admin@SBC01> show status addressContext default zone ZONE_IN_PCR1377 trunkGroupStatus 
trunkGroupStatus TG_IN_PCR1377 {
    state                      inService;
    totalCallsAvailable        -1;
    totalCallsInboundReserved  0;
    inboundCallsUsage          1;
    outboundCallsUsage         0;
    totalCallsConfigured       -1;
    priorityCallUsage          0;
    totalOutboundCallsReserved 0;
    bwCurrentLimit             -1;
    bwAvailable                -1;
    bwInboundUsage             1124;
    bwOutboundUsage            0;
    packetOutDetectState       normal;
}
[ok][2014-07-17 16:55:31]

admin@SBC01> show status addressContext default zone ZONE_OUT_PCR1377 trunkGroupStatus
trunkGroupStatus TG_OUT_PCR1377 {
    state                      inService;
    totalCallsAvailable        -1;
    totalCallsInboundReserved  0;
    inboundCallsUsage          0;
    outboundCallsUsage         1;
    totalCallsConfigured       -1;
    priorityCallUsage          0;
    totalOutboundCallsReserved 0;
    bwCurrentLimit             -1;
    bwAvailable                -1;
    bwInboundUsage             0;
    bwOutboundUsage            1124;
    packetOutDetectState       normal;
}

Code Block

language	none

> show addressContext default sipActiveRegisterNameStatus
sipActiveRegisterNameStatus Sonus@10.54.8.191 268 {
    state                    completed;
    contactURI               sip:Sonus@10.70.52.91:5070;
    nextHopIpAddress         10.70.52.91;
    nextHopPortNum           5070;
    registrarIpAddress       10.128.254.86;
    registrarPortNum         5090;
    externalExpirationTime   3598;
    internalExpirationTime   3600;
    creationTime             2014-06-27T09:35:54+00:00;
    registrarDomainName      "";
    endPointBehindNapt       0;
    natPinholeLearningStatus none;
    securityMechanismType    none;
    isRoaming                1;
}

Pagebreak

Space shortcuts

Page tree

Page History

Versions Compared

Old Version 10

New Version 11

Key

Command Syntax

cacOffenderStatus

dnsGroup

dynamicBlacklist

intercept

ipAccessControlList

ipInterfaceGroup

ipRouteStatus

ipsec

linkDetectionGroup

linkDetectionGroupStatistics

linkDetectionGroupStatus

logicalSigAddressBindingStatus

sipActiveGroupRegStatus

sipActiveGroupRegSummaryStatus

sipActiveRegisterNameStatus

sipDeletedRegStatus

sipDeletedRegisterNameStatus

sipRegCountStatistics

sipSubCountStatistics

sipSubscriptionStatus

surrRegCountStatistics

zone

zoneCurrentStatistics

zoneIntervalStatistics

zoneStatus

Command Parameters

IPSEC Parameters

Zone Parameters

Command Examples

General Examples

Examples Showing Audio and Video Usage

Audio-Only CLI Output

Video-Only CLI Output

Both Audio and Video CLI Output