Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Caption
0Figure
1Trunk Provisioning - Egress Ip Attributes H323 Domian Name
 

Image Modified

There are no Domain Names for DEFAULT_H323 type of Egress Ip Attributes.

...

Caption
0Figure
1Trunk Provisioning - Egress Ip Attributes SIP Domain Name
 

Image Modified

The following fields are displayed:

Caption
0Table
1Egress Ip Attributes Domain Name Parameters
 

Parameter

Description

Use Sip Domain Name In From FieldBy default, 
Spacevars
0product
uses its IP address as the host-port of the FROM URI in the outgoing INVITE message. Enable flag to use the originating gateway information returned in the policy response as the host-port of the FROM URI in the outgoing INVITE message.
  • disable (default)
  • enable

When Use Sip Domain Name In From Field is enabled, the following parameters are available:

    • Preserve Ingress From Domain Name If a SIP domain is configured for the ingress trunk group and this flag is enabled, the default gateway associated with that SIP domain will be the originating gateway. Otherwise, the originating gateway will be the default gateway associated with the SIP domain associated with the Softswitch entity.
      • disable (default)
      • enable

         

        Note

        This parameter only applies when a Domain Name is configured for this zone.

    • Use Lower Case Domain Names – Set flag to allow lower case domain name.
      • disable (default)
      • enable

         

        Note

        This parameter only applies when a Domain Name is configured for this zone.

Use Sip Domain Name In Request Uri Use SIP Domain Name In Request URI Flag.
  • disable – 
    Spacevars
    0product
    includes the IP address in the host-port portion of the Request-URI in outgoing SIP INVITE messages.
  • enable – 
    Spacevars
    0product
    includes the trunk group domain associated with egress trunk group as destination domain name in outgoing SIP INVITE messages.

When Use Sip Domain Name In Request Uri is enabled, the following parameters are available:

    • Preserve Ingress RUri Domain Name – Preserve Ingress R-URI Domain Name Flag. When enabled, the ERE/
      Spacevars
      0product
      uses domain name received in the Request-URI as destination domain name in outgoing SIP INVITE messages. Normally, outgoing SIP INVITE messages contain the trunk group domain assigned to egress trunk group.
      • disable (default)
      • enable
    • Use Lower Case Domain Names – Set flag to allow lower case domain name.
      • disable (default)
      • enable
Use Zone Level Domain Name In Contact Enable flag to use Zone level domain name in Contact header.
  • disable (default) 
  • enable
Use Ip Signaling Peer Domain In Request Uri Enable flag to use IP Signaling Peer Domain in Request URI.
  • disable (default)
  • enable

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

...