Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Caption
0Table
1Policy Server - Remote Server

Parameter

Description

Name

Specifies the name of the remote policy server.

IP Address

Specifies the 32-bit IP address (IPv4 or IPv6) of the PSX Server in dotted decimal form.

  • IPv4 - This is V4 IP address in dotted decimal form (for example 128.127.50.224).
  • IPv6 - This is V6 IP address in hexadecimal/colon form (for example, 1280:1276:3350:2224:2222:3333:8888:1245 or fd00:21:445:128::7880).

Port Number

The logical port number for the

Spacevars
0series
to use for IP communication with the remote policy server. Must be 1-65535; default is 3055.

State

The administrative state of the remote policy server:

  • disabled
  • enabled

Mode

The operational state of the local remote policy server:

  • outofservice
  • active
  • standby
  • alternate

Action

The method by which queued transactions are processed when oper-state goes to standby or outofservice:
dryup (default)—all queue entries are processed to completion unless retries expires.
force—all queue transactions are dropped immediately.

Transaction
Timer

The time to wait (in milliseconds) for a reply from the initial transaction request. When this timer expires, a transaction retry will be issued. Subsequent retries of this transaction are controlled by retries and delaytime. Must be 50-60000, default is 500.

Keep Alive
Timer

The time interval (in seconds) to wait before issuing a "keep-alive" poll to the Policy Server. This poll is issued only if there is no other policy server activity during this interval. The receipt of any message from the Policy Server resets the elapsed time to 0. Must be 1-60, default is 5.

Retry Timer

The time in milliseconds that the 

Spacevars
0series
waits for a response from the Policy Server after retransmitting the transaction request.

Retries

The number of times to retry any policy server transaction. Must be 0-32, default is 1.

Sub Port Number

The port number assigned for the Ip address of the Policy Server for the specific purpose of communicating subscriber data.

...