Specifies the name of the zone. Must be 1-23 characters. The value ranges up to 23 characters.
Note
Zone name is unique across all address contexts.
ID
Unique ID of this zone. The value ranges from 1 to 4096.
Note
Zone ID is unique across all address contexts.
Disable Zone Level Loop Detection
If disabled (default), Global Loop Detection flag takes precedence.
If enabled, Loop Detection is disabled, irrespective of Global Loop Detection flag.
DNSGroup
The name of the DNS group. Select the DNS group from the drop-down list.
Remote Device Type
Specifies the type of device facing this Zone. The options are:
None(default)
accessDevice
appServer
Core
Nni
Domain Name
Specifies the name of the fully qualified domain name for this Zone. The value ranges up to 63 characters.
SIP Register Relay
Enable flag to relay REGISTER using the routes from PSX. Options are:
Disabled (default)
Enabled
Dialog Transparency
This parameter specifies if dialog transparency is enabled for SIP messages processed in that zone. If enabled, SBC sends "Call-ID", "From" tag, and "To" tag transparently in the outgoing message.
Note
The parameter Dialog Transparency must be enabled in both the ingress and egress zones.
Note
To enable Dialog Transparency for a zone, first disable all Sip Sig Port for that zone.
Disabled (default)
Enabled
Flexible Policy Adapter Profile
Use this Zone/Trunk Group parameter to associate a Sip Adapter Profile configured for flexible policy (Profile Type=Flexible Policy) with a particular Zone/Trunk Group.
If Flexible Policy Adapter Profile is provisioned both at the trunk group and zone levels, the trunk group’s profile takes precedence. If Input Adapter Profile is configured, it is applied first to manipulate the PDU and then Flexible Policy Adapter Profile rules are applied on the manipulated PDU.