...
| Caption |
|---|
| 0 | Table |
|---|
| 1 | DBL Profile parameters |
|---|
|
|
Parameter | Length/Range | Description |
|---|
dblProfile
| 1-23 | The administrative name of the DBL profile. |
rule
| N/A | Specifies the DBL rule name within a DBL profile.
Additional parameters are shown below: action – The action to take when a specified event meets the criteria:actionEffectivePeriod – The DBL action enforcement period (in seconds) the DBL policer entry remains effective. (range: 60-86400 / default = 60)event – The type of event to either watch for or blacklist for this DBL rule.badSipMessage – Bad SIP message.
epCacAggrReject (Endpoint CAC aggregate rejection) –
sipRegistrationFailure – SIP Registration failure.
eventPerDayThreshold – Number of events per day used as fill rate of token bucket policer (value: 0-86400, default = 0)state – The administrative state of this rule.disabled (default)enabled
| Note |
|---|
Dynamic Blacklist for event epCacAggrReject is supported for callRate only. |
|
state
| N/A | The administrative state of the DBL profile. disabled (default)enabled
|
type
| sip | The type of application being monitored ( "sip" is the only choice). |
Command Examples
The following example sets DBL profile named "DBP-1" with a rule (named "RULE-1) to watch SIP endpoints every 60 seconds for a bad SIP message. If the number of events per day to be used as a token bucket policer fill rate is 13.
...