Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Converted internal note to official one.

Noprint Panel

borderColorblack
bgColororange
titleColorwhite
borderWidth2
titleBGColorblack
borderStylesolid
titleInternal Information

Relevant ICD: SBX-30086 SBC7K/5K sharedCacLimitsPool Enhancement to Encompass Gateway Trunk Group

Image Library: _Gw_TG_CAC_Egress_and_Ingress
Internal_display_only

Add_workflow_for_techpubs
AUTH1sbsarkar
REV5bscoggins
REV6bscoggins
REV3vperumal
REV1rckumar

 

 

Use this object to configure various metrics/parameters related to Call Admission Controls on the egress leg.

On the SBC main screen, navigate to All > Address Context > Zone > Gw Trunk Group > CAC > Egress.

  1. The Egress window is displayed.

    Caption
    0Figure
    1Egress - Edit Egress

  2. Select Address Context, Zone and Gw Trunk Group from their respective drop-down lists.
  3. The Edit Egress window is displayed.
  4. Make necessary changes and click Save. Click Clear to cancel the changes.

The parameters displayed on the Edit Egress window are:

Caption
0Table
1Edit Egress - Parameter Description Table
ParameterDescription
Call LimitTotal number of concurrent calls (0-2147483647, or unlimited), allowed on the egress leg. (default=unlimited)
Emergency OversubscriptionThe percentage (0-1000) of resource oversubscription allowed for emergency calls. (default=10)
Hpc OversubscriptionThis parameter specifies the amount of resource over-subscription (0-100), as a percentage, that are allowed for HPC. When the baseline call limit and bandwidth limit are reached, normal calls are not admitted, but additional HPC are allowed up to the configured percentage value. (default=10)
Call Rate Max

Maximum sustained egress call rate (SBC 5000: 1-450, or unlimited; SBC 7000: 1-1350, or unlimited) allowed in calls per second. (default=unlimited)

Call Burst Max

Maximum allowed burst size (SBC 5000: 1-900, or unlimited; SBC 7000: 1-2700, or unlimited) above the allowed sustained rate for egress call attempts, in calls per second. (default=unlimited)

Note: You can set both Call Burst Max and Call Rate Max as unlimited; however, if you assign a value to one parameter, the other must also be assigned a value.

Info
titleNote

Call policing, using Call Rate Max and Call Burst Max, is applicable only to normal and emergency calls, and not to high priority calls (HPC).

 

Pagebreak