Page History

...

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

Congestion Commands

The

On SBC main screen, go to All > System > Congestion. The Congestion window is displayed. The Congestion Commands panel appears at the bottom

The following options are displayed:

setSysCongestion

This command helps you to simulate resources for appropriate CPU usage.

On the Congestion Commands panel, choose setSysCongestion as the Command from the drop-down list and click Select. A pop up window appears with the respective command parameters.

Choose the Resource and the Level at which the congestion should happen and click setSysCongestion.

The result of the action is displayed:

setDebugSysCongestion

This command helps you to set the debug flag along with the system congestion.

On the Congestion Commands panel, choose setDebugSysCongestion as the Command from the drop-down list and click Select. A pop up window appears with the respective command parameters.

Select enabled for Debugflag and click setDebugSysCongestion.

The result of the action is displayed:

setSysIpInstance

This command help you to direct all the calls to a specific instance of call processing engine.

On the Congestion Commands panel, choose setSysIpInstance as the Command from the drop-down list and click Select. A pop up window appears with the respective command parameters.

Select the Ip Type from the drop-down list and add the instance value and click setSysIpInstance.

The result of the action is displayed:

cpuhistory

This command helps you to view the CPU usage history.

On the Congestion Commands panel, choose cpuhistory as the Command from the drop-down list and click Select. A pop up window appears with the respective command parameters.

Select the desired Type from the drop-down list and click cpuhistory.

The result of the action is displayed:

memhistory

This command helps you to view the Memory usage history.

On the Congestion Commands panel, choose memhistory as the Command from the drop-down list and click Select. A pop up window appears with the respective command parameters.

Select the desired Type from the drop-down list and click memhistory.

The result of the action is displayed:

...

...