...
| Caption |
|---|
| 0 | Table |
|---|
| 1 | SBC 5400 Platform CRUs |
|---|
|
Equipment Requirement | Description |
|---|
Fan Assembly | Three cooling fan assemblies located behind the front bezel. | Solid State Drive | Solid State Disk (SSD) storage located behind the front bezelaccessible from rear of the chassis.
 | Air Filter | Located within the front bezel assembly for filtering the air drawn into the chassis by the cooling fans. | SFP/SFP+ | Single or Multi mode fiber transceivers and Copper SFP/SFP+ (which functions like a plug) used for Ethernet connections
to Media ports and HA ports. Connect to LC-connector on the SFP side and SX-module on the other end of the connection
to L3 switch.
| Power Supply | Up to two DC or AC power supplies accessible from rear of chassis. | Bezel | Secures replaceable air filter to front of chassis and identifies LED status indicators. | | DSP2x | DSP2x Signal Processing Cards (plug-in module with a high capacity DSP card). |
|
DSP2x Signal Processing Cards for SBC 5400
This is the second generation Signal Processing Server (SPS) for SBC 5400 and provides increased signal processing capabilities over the earlier SPS100 card by incorporating the latest DSP technology. It is an add-on module that can connect to SBS100 SBS200 motherboard through a 150-pin connector.
...