...
...
This object allows you to assign server module roles, set the coredump server profile, and perform server actions such as restart, soft reset and start software upgrade.
Command Syntax
| Code Block |
|---|
|
% set system serverAdmin <name>
coredumpProfile <name>
role <primary | secondary>
% request system serverAdmin <name>
forceCoreDump coreDumpType <full | partial> |
...
removeCoredump coreDumpFilename <file name>
restart
softReset
startSoftwareUpgrade
integrityCheck <perform | skip>
package <name>
rpmName <name>
versionCheck <perform | skip> |
Command Parameters (set)
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Command Parameters (set) |
|---|
|
|
...
...
| The unique name of the server. | coredumpProfile
|
|
...
| Core Dump Profile name. | role
|
|
...
| Use this parameter to specify the server module role. When set to 'primary', role designates a server for internal processing. primary (default) secondary
|
|
Command Parameters (request)
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Command Parameters (request) |
|---|
|
|
...
...
| The unique name of the server. | forceCoreDump |
|
...
| Use this command to force the termination of a fixed set of application processes with accompanying core dumps for troubleshooting purposes. By default, a full dump is performed if no option is specified. Before the command executes, the user is prompted to confirm or cancel the operation. If canceled, no further action is taken, and application operation is not affected. coreDumpType– Choose an option:full (default) – Full set of processes to dump (see Table 3 below).partial – Partial set of processes to dump (see Table 4 below
|
|
...
identify duration
...
0-255 seconds
...
...
...
| Use this object to remove the specified coredump from the chosen server. coredumpFileName <filename> – The name of the coredump file.
| restart
|
|
...
| Restart the specified server. | softReset
|
|
...
| Restart the application on the server without rebooting the server. | startSoftwareUpgrade
|
|
...
| Use this control to start a software upgrade on the specified server. integrityCheck – Use this flag to specify whether or not to perform an integrity check (signature validation) against software updates and patches as they are uploaded to the system.package – Name of the new package.rpmName – Name of the rpm/package, if different from the file name of the .tar.gz.versionCheck– Use this flag to perform/skip version checking during software upgrades.
|
|
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Full Application Process List |
|---|
|
CamProcess | ChmProcess | CpxAppProc | DiamProcess | DnsProcess | DsProcess | EmaProcess | EnmProcessMain | FmMasterProcess | IkeProcess | ImProcess | IpmProcess | PathchkProcess | PesProcess | PipeProcess | PrsProcess | RtmProcess | SamProcess | ScmProcess_0 | ScmProcess_1 | ScmProcess_2 | ScmProcess_3 | ScpaProcess | SmProcess | SsaProcess | SsreqProcess | | |
|
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Partial Application Process List |
|---|
|
Process | PrsProcess | RtmProcess | SamProcess | ScmProcess_0 | ScmProcess_1 | ScmProcess_2 | ScmProcess_3 | SmProcess |
|
Command Example
To display server administration configuration:
| Code Block |
|---|
|
% show system serverAdmin SBC01
coredumpProfile default;
role primary;
modularType false;
hwType ConnexIP5200; |
To illuminate the locator LED of server FUBBCANARYb for two minutes:
...
...