Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3

...

By default only ten entries are displayed in a view. You can choose the number of entries to be displayed under the Show entries drop-down box. 

The SIP Active Register Name Status can be checked for each Address Context or for all the Address Contexts created. Use the drop-down box to select the desired Address Context.

...

Caption
0Table
1SIP Active Register Name Status parameters
ParameterDescription
Aor NameSpecifies the name of the AOR created.
IDSpecifies the unique identification number for the AOR created.
State

Specifies the registration state of the endpoint. The options are:

  • challenged
  • completed
  • deleting
  • initiating
  • null
  • refreshing
  • terminated
  • updating
Contact URISpecifies the SIP CONTACT URI header value.
Next Hop Port NumSpecifies the Next hop TSAP UDP port number.
Register IP AddressSpecifies the SIP Registrar's IP Address.
Register Port NumSpecifies the SIP Registrar's UDP port number.
External Expiration TimeSpecifies the external expiration timer value in seconds.
Internal Expiration TimeSpecifies the internal expiration timer value in seconds.
Creation TimeSpecifies the Octet string identifying date and GMT time at which the SIP registration is initiated.
Register Name DomainSpecifies the SIP registrar's domain name.
End Point Behind NaptIf value is“1”, the registered endpoint is behind NAPT; otherwise, value is “0”.
NAT Pinhole Learning Status

Specifies the NAT pinhole learning process status. The options are:

  • aborted-due-to-traffic
  • completed
  • completed-due-to-timeout
  • disabled
  • none
  • progressing
Security Mechanism Type

Specifies the security mechanism type used for this registration. The options are:

  • ipsec-3gpp
  • none
  • tls
Registration TypeSpecifies the type of registrations. The registration type can be 'normal' or 'emergency'.
E2ae Media Security

Specifies the media-security status of the UE in the registration record. The options are:

  • sdes-srtp
  • none

If set to sdes-srtp, UE has e2ae (end-to-access edge) capability.

Refer to IMS end-to-access edge (e2ae) Media Security Support to know more on this feature.

Is RoamingSpecifies the roaming state. If value is 1, the registered endpoint is Roaming, else, the value is 0.
Via Header AddressSpecifies the IP address of the bottom-most via header of a SIP Message populated by the first originator of the REGISTER request.
Transport Protocol To EndpointSpecifies the transport protocol used on access toward end point.
Transport Protocol To AS
Specifies the the transport protocol used on access toward AS.
External Expiration Time Left
Specifies the remaining time left, in seconds, before registration expired toward expires towards the end point.
Internal Expiration Time Left
Specifies the remaining time left, in seconds, before registration expired toward expires towards the AS.

Searching Records

SBC can search the registration name status based on the part of the Address of Record (AOR). It also provides the ability to search the entries which are not in the statistics table but registered in the SBC application using a part of the AOR name or the entire AOR name. The registration ID (RegID) is also used as a search function. In case of unknown registration ID, 0 is specified as a wildcard entry. AOR consists of userPart (user name) and hostname (user name end point IP address), and is expressed in the userPart@hostname format.

...