Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: restored to prior values, 6.2.2 68171 feature was not ported to 7.1
Panel

In this section:

Table of Contents
maxLevel2

 

You can configure up to three RADIUS servers per SBC. When more than one RADIUS server is configured and RADIUS authentication is attempted, the server configured with the

...

lowest numeric priority value is tried first. If fallback is configured, the

...

server with the next lowest numeric priority value is tried next. SBC allows a configurable number of retries and time-outs before retry.

To View

...

the List of Radius Servers

On the SBC main screen, go

...

to Administration

...

 > Users and Application Management

...

 > Radius Authentication> Radius Server. The Radius Server window is displayed.

Caption
0Figure
1Radius Server Window
 

...

Image Modified

To Create

...

a

...

Radius Server

...

Info
iconfalse
titleNote

You can configure up to three RADIUS servers per SBC. The New Radius Server

...

option is not available once three servers are configured.

Caption
0Figure
1Radius Server Fields
 

Image Removed

To create a new RADIUS server configuration:

  1.  Click New Radius Server. The Create New Radius Server window is displayed.

    Caption
    0Figure
    1Create New Radius Server

...

  1. Window
     

...

  1. Image Modified

...

  1. Use the following table to specify configuration for a RADIUS server, then click Save.
Caption
0Table
1

...

RADIUS Server Paramters
 
ParameterDescription
Server NameThe name for the RADIUS server

...

(up to 23 characters).

...

Priority When configuring multiple RADIUS servers, use this attribute to specify the order to attempt RADIUS authentication. The RADIUS server with the lowest numeric priority value is contacted first.
StateOperational state of the RADIUS server. Options are

...

  • Disabled (default)

...

  • Enabled
Radius Server IP

The IPv4 address of the RADIUS server.

...

The default value

...

is 0.0.0.0.

Info
iconfalse
titleNote

IPv6 configuration for RADIUS

...

servers is not supported at this time.

Radius Server PortThe RADIUS server port to which the SBC sends

...

requests. Range: 1-65535.

...

The default value is 1812.
Radius Nas IPThe IPv4 address of the SBC to send in

...

the ACCESS_REQUEST message.

...

The default value

...

is 0.0.0.0.
Radius Shared SecretThe shared secret used to encrypt the data exchanged between the SBC and the RADIUS server. Range: 6-128 characters.
Mgmt Interface Group

The Management Interface Group

...

to use to connect to

...

the RADIUS server.

Info
iconfalse
titleNote

In

...

an SBC HA configuration, four management IP addresses must be listed

...

To copy any of the created Radius Servers and to make any minor changes, click the radio button next to the specific Radius Server to highlight the row.

Caption
0Figure
1Radius Server Highlighted
 

Image Removed

Click Copy Radius Server tab on the Radius Servers List panel.

:

  • mgt0 and mgt1 IP addresses of the Active CE
  • mgt0 and mgt1 IP addresses of and Standby CE

To Copy

...

a Radius Server

Info
iconfalse
titleNote

You can configure up to three RADIUS servers per SBC. The Copy Radius Server

...

option is not available once three servers are configured.

Caption
0Figure
1Radius Server Fields
 

Image Removed

The Copy Selected Radius Server window is displayed along with the field details which can be edited.

Caption
0Figure
1Radius Server Copy Window
 

Image Removed

Make the required changes to the required fields and click Save to save the changes. The copied Radius Server is displayed at the bottom of the original Radius Server in the Radius Server List panel.

To Delete Radius Server

To delete any of the created Radius Server, click the radio button next to the specific Radius Server which you want to delete.

Caption
0Figure
1Radius Server Highlighted
 

Image Removed

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Caption
0Figure
1Radius Server Delete Confirmation
 

Image Removed

...

To copy the configuration of an existing RADIUS server and modify it to create a new configuration: 

  1. Click the radio button adjacent to its name.
  2. Click Copy Radius Server. The Copy Radius Server window opens showing the values of the configuration you are copying. 
  3. Make changes to the fields as needed and click Save.

To Delete a Radius Server

To delete a RADIUS server configuration:

  1. Click the radio button adjacent to the name of the RADIUS server configuration you want to delete.
  2. Click the X at the right end of the row.
  3. Confirm the deletion when prompted.