Page History

...

1. Configure the

   Spacevars
   0 product

    for a basic call.
   
   
2. Install SIPREC license on the

   Spacevars
   0 product

    using the EMS.
   
   

3. Configure the external PSX.

   Code Block
   language none
   % set system policyServer localServer PSX_LOCAL_SERVER mode outOfService state disabled % set system policyServer remoteServer <psx name> ipAddress <psx_ip> portNumber <psx_port> state enabled mode active

4. Create a recorder profile on the PSX and configure call recording criteria of the recorder profile.

   Include Page
   EMSDOC100:RecorderRecordertype_ProfilerecordingtypeEMSDOC100:Recorder Recordertype_Profilerecordingtype

   Caption
   0 Figure 1 Create Recorder Profile

   Caption
   0 Figure 1 Configure Call Recording Criteria

5. Create a SIP signaling port on the

   Spacevars
   0 product

    towards the recorder, and enable SIPREC.

   Code Block
   language none
   % set addressContext <ADDRESS-CONTEXT> zone <ZONE> sipSigPort <SIP SIGNALLING PORT> siprec enabled

6. Create a trunk group from the

   Spacevars
   0 product

    for recording.

   Info
   title Note
   Ensure the name of the trunk group is is identical to the one used above while creating Recorder profile in PSX.

7. Add static routes toward the recorder.
   
   

8. If a secondary recorder is also configured on the PSX for redundancy, create IP peers with both primary and secondary recorder IP addresses and enable options ping for these recorders. While recording, if the primary SRS is identified as DOWN by the

   Spacevars
   0 product

    through options ping mechanism, a recording session is initiated towards the secondary SRS and the recording continues.

   Code Block
   language none
   % set profiles services pathCheckProfile <path_check_profile> protocol sipOptions recoveryCount <count> replyTimeoutCount <count> sendInterval <interval> %set addressContext default zone $sbx_zone_rs_v4 ipPeer <IP_PEER_SRS> ipAddress <ip> ipPort <port> pathCheck profile <path_check_profile> state enabled

...